pH effects on the complexation, miscibility and radiation-induced crosslinking in poly(acrylic acid)-poly(vinyl alcohol) blends

The effect of pH on the complexation of poly(acrylic acid) with poly(vinyl alcohol) in aqueous solution, the miscibility of these polymers in the solid state and the possibility for crosslinking the blends using gamma radiation has been studied. It is demonstrated that the complexation ability of poly(vinyl alcohol) with respect to poly(acrylic acid) is relatively low in comparison with some other synthetic non-ionic polymers. The precipitation of interpolymer complexes was observed below the critical pH of complexation (pH(crit1)), which characterizes the transition between a compact hydrophobic polycomplex and an extended hydrophilic interpolymer associate. Films prepared by casting from aqueous solutions at different pH values exhibited a transition from miscibility to immiscibility at a certain critical pH, pH(crit2), above which hydrogen bonding is prevented. It is shown here that gamma radiation crosslinking of solid blends is efficient and only results in the formation of hydrogel films for blends prepared between pH(crit1) and pH(crit2). The yield of the gel fraction and the swelling properties of the films depended on the absorbed radiation dose and the polymer ratio. [Diagram: see text] SEM image of an equimolar PAA-PVA blend cast from a pH 4.6 solution.     

TRANSESTERIFICATION OF POLY（BISPHENOL A CARBONATE） WITH AROMATIC AND ALIPHATIC SEGMENTS IN BUTYLENE TEREPHTHALATE-CAPROLACTONE COPOLYESTER

In this article, the transesterification of poly(bisphenol A carbonate) (PC) with butylene terephthalate-caprolactone copolyester at a weight ratio 50/50 (BCL(21)) was thoroughly investigated by proton nuclear magnetic resonance spectroscopy (^1H-NMR), in conjunction with a model compound. The ^1H-NMR results of the annealed blend PC/BCL(21) show that the formation of bisphenol A-terephthalate ester units is the same as in the annealed blend of PC with PBT, and the transesterification actually occurs between PC and butylene terephthalate (BT) segments in BCL(21). By comparison with the model compound bisphenol A dibutyrate, the new signal appearing at δ=2.56 in the ^1H-NMR spectrum confirms the existence of bisphenol A caprolactone ester units resulting from the exchange reaction of PC with caprolactone (CL) segments. ^1H-NMR analysis of the transesterification rates reveals that the reaction of PC with aromatic and aliphatic segments in BCL(21) proceeds in a random manner. The miscibility of the blend PC/BCL(21) copolyester is favorable for the transesterification of PC with BT segments and CL segments.     

Phase Behavior of Polymer Blends

The present report deals with some results on phase behavior, miscibility and phase separation for several polymer blends casting from solutions. These blends are grouped as the amorphous polymer blends, blends containing a crystalline polymer or two crystalline polymers. The blends of PMMA/PVAc were miscible and underwent phase separation at elevated temperature, exhibited LCST behavior. The benzoylated PPO has both UCST and LCST nature. For the systems composed of crystalline polymer poly(ethylene oxide) and amorphous polyurethane, of two crystalline polymers poly(-caprolactone) and poly[3,3,-bis-(chloromethyl) oxetane], appear a single T_g, indicating these blends are miscible. The interaction parameter B's were determined to be –14 J cm^–3, –15 J cm^–3 respectively. Phase separation of phenolphthalein poly(ether ether sulfone)/PEO blends were discussed in terms of thermal properties, such as their melting and crystallization behavior.This revised version was published online in November 2005 with corrections to the Cover Date.     

A study of macroderm a and macroderm L monolayers and their two-dimensional compatibility

 Spread monolayers of two new skin permeation enhancers, MacroDerm A and MacroDerm L were investigated at the water/air interface as a function of temperature and of subphase composition. Both components did not seem to be markedly affected by changes in ionic strength and by the presence of metal ions in the subphase. The two-dimensional binary system MacroDerm A –MacroDerm L was also studied at the water/air interface at 298 K on pure water subphase. The behavior of surface areas, surface compressional moduli and collapse pressure as a function of molar ratios of components shows that MacroDerm A and MacroDerm L are miscible. Received: 17 December 1996 Accepted: 5 March 1997     

Synthesis and miscibility studies of [60]fullerenated poly(2‐hydroxyethyl methacrylate)

[60]Fullerenated poly(2‐hydroxyethyl methacrylate)s containing 0.6–3.0 wt % C₆₀ were synthesized. These polymers are soluble in methanol and N,N‐dimethylformamide (DMF). [60]Fullerenated poly(2‐hydroxyethyl methacrylate)s with higher C₆₀ contents are only sparingly soluble in DMF and virtually insoluble in other organic solvents. A loading of 1.2 wt % C₆₀ in poly(2‐hydroxyethyl methacrylate) does not greatly affect its miscibility with poly(N‐vinyl‐2‐pyrrolidone), poly(1‐vinylimidazole), and poly(4‐vinylpyridine). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1157–1166, 2002     

ESR spin-label study of poly(styrene-co-methacrylic acid)/poly(epsilon-caprolactone) semi-interpenetrating polymer networks with controlled hydrogen-bond interactions

The morphology and miscibility of semi-interpenetrating polymer networks (semi-IPN) prepared with poly(styrene-co-methacrylic acid) [P(S-co-MAA)] of different carboxylic acid contents and poly(epsilon-caprolactone) (PCL) have been studied by ESR spin-label method. The ESR spectra of spin-labeled PCL showed one motional component at any specific temperature. It indicated that the spin-labeled molecules were located in one type of environment. The coexistence of two motional components in the ESR spectra of all semi-IPN samples was observed over a certain temperature range. This phenomenon suggested that the semi-IPNs were not compatible systems; they contained two microphases, a PCL-rich microdomain and a P(S-co-MAA)-rich microdomain. The miscibility could be improved by increasing the carboxylic acid content, which could enhance the hydrogen-bonding interactions between the ester groups of PCL and carboxylic acid groups in P(S-co-MAA). It was also found that the intracomponent cross-linking of the semi-IPNs was not in favor of the miscibility. The microphase separation occurred in all semi-IPNs, even in the samples having strong hydrogen-bonding interactions. With increasing cross-linking density, the microphase separation became more remarkable.     

Liquid-crystalline properties of laterally fluorinated alkyl 4”-alkylterphenyl-4-yl carbonates and their mixtures

Terphenyl carbonate compounds were tested in order to establish their use in formation of SmC mixtures. Miscibility studies were performed and phase diagrams were constructed. The influence of the lateral substitution of rigid core by fluorine atoms was checked. Few of tested compounds forming nematic phase support synclinic order in mixtures. It was also found that compounds forming highly ordered tilted phases cannot be used in SmC mixtures because of strong thermal stability of these phases.     

Coarse‐grained molecular dynamics simulations of stereoregular poly(methyl methacrylate)/poly(vinyl chloride) blends

The stereoregular poly(methyl methacrylate)/poly(vinyl chloride) blends with a wide formulation range are extensively simulated using the coarse‐grained (CG) molecular dynamics (MD) method. To improve the representability, the bonded CG potentials are re‐parameterized against the atomistic simulated melt systems whereas the nonbonded CG potentials are adopted as developed in our previous work. Based on the CG potentials, the MD simulations reproduce all the local distributions of pure systems and the miscibility of mixed systems. Moreover, the global conformational properties are also closer to the target ones than those obtained using the previous CG potentials. The changes in density and volume upon mixing are computed together with the energies of mixing. They are all negative over the entire composition range and indicate stronger intermolecular interactions between distinct components than those between identical components. In particular, it is found that upon mixing the changes in density are insensible to chain tacticity but the changes in volume and the energies of mixing do, which quantitatively confirms that both inter‐molecular interactions and free‐volumes mainly contribute to the observed phase behaviors. Such models and methods reported herein can be used to quickly optimize formulations of polymer blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 203–212     

Molecular orientation and composition at the surface of spin‐coated polyfluorene:Fullerene blend films

The surface composition in spin‐coated films of polyfluorene:fullerene blends was determined quantitatively by near‐edge X‐ray absorption fine structure (NEXAFS) spectroscopy. By comparing partial and total electron yield spectra, we found vertical compositional differences in the surface region. Furthermore, the orientation of the polymer chains was investigated by variable‐angle NEXAFS. Blend films of poly[(9,9‐dioctylfluorenyl‐2,7‐diyl)‐co‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole] with [6,6]‐phenyl‐C61‐butyric acid methyl ester in two different blend ratios were studied. Results showed polymer enrichment of the surfaces for films with a polymer:fullerene weight ratio of 20:80 and of 50:50, spin‐coated from both chlorobenzene and chloroform solutions. The angular dependence of the NEXAFS spectra of the pure polymer films showed a preferential plane‐on orientation, which was slightly stronger in the subsurface region than at the surface. In blend films, this orientational preference was less pronounced and the difference between surface and subsurface vanished. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Origin of miscibility‐induced sequential reordering and crystallization‐induced sequential reordering in binary copolyesters: a Monte Carlo simulation

The effect of the repulsive interaction between the components of binary copolyesters on their sequence order was investigated with the Monte Carlo simulation method. The phase separation and ester‐interchange reactions were implemented simultaneously with a kind of one‐site bond fluctuation model. When the repulsive interaction energy was applied to the binary copolyesters, miscibility‐induced sequential reordering (MISR) was induced. The more repulsive the pair interaction was, the higher the sequence order was. During the MISR process, homoester‐interchange reactions became more favorable because of the repulsive interaction, accompanying the decrease of the interactional free energy. The sequence order resulting from MISR was independent of the relative trial ratio of phase separation to ester‐interchange reaction at a given value of interaction energy. Restoration of the sequence distribution was also simulated with and without the repulsive interaction between the components of the binary copolyesters to investigate the effect of MISR on the crystallization‐induced sequential reordering (CISR) process in binary copolyesters, where sequences with lengths longer than 6 were assumed to crystallize and could not take part in ester‐interchange reactions. The sequence distribution in the amorphous phase was restored via ester‐interchange reactions. When the repulsive interaction was applied to binary copolyesters during the CISR process, restoration of the sequence distribution was accelerated, indicating that MISR can accelerate the CISR process when a polyester blend shows upper critical solution temperature behavior. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1337–1347, 2001