Bilayer studies in mixedn-decanol/n-tetradecanol complexes ofn-decylammonium beidellite

Complexes have been prepared by treatment ofn-decylammonium beidellite with mixtures ofn-decanol andn-tetradecanol with different concentrations. Measurements of the basal spacings of the obtained complexes have been performed in a wide range of temperatures. Three different bilayer phases have been established between (20 and 70°C: the _i(C₁₀) phases (=bilayers ofn-decyl chains); the _i(C₁₀/C₁₄) phases (=mixed bilayers ofn-decyl andn-tetradecyl chains in molar ratio approximately 1:1) and the _i(C₁₄) phases (=bilayer ofn-tetradecy 1 chains with then-decylammonium ions included). In all bilayer phases the chains stand perpendicular to the silicate interfaces. In definite concentration ranges two of the phases coexist, i.e., miscibility gaps occur, which disappear at temperatures higher than the temperature of the _i/ transition. The miscibility gaps are reversible with temperature. The composition of the intercalated bilayers has been studied by HPLC of the excess alkanol mixture separated from the beidellite complexes after the equilibrium has been reached. There is preferential adsorption of one of two alkanols from the mixture, which is in agreement with the observed miscibility gaps. The space filling problem as well as the structure of the three bilayer phases observed have been discussed.     

The synthesis of a precursor of polybenzimidazole (PBI) and blends with polyamic acid (PAA)

The precursor of polybenzimidazole (PBI), poly(3,3′-diamino-4,4′-benzidine isophthalamide) (PDABI), was synthesized from poly(3,3′-dinitro-4,4′-benzidine isophthalamide) (PDNBI) by reduction. With increasing temperature, the NH₂ moiety which was protected by SnCl₅^?1 could cyclize and form PBI. Blends with polyamic acid (LaRC-TPI) were prepared. Clear blend films were prepared at up to 400°C. The IR spectra displayed shifts in the NH stretching band, thereby providing evidence for specific interactions related to the miscibility of their cured blends. © 1993 John Wiley & Sons, Inc.     

High temperature polymer blends: an overview of the literature

A review of work which has been performed on high temperature polymer blends is presented. The discussion is divided into miscible and immiscible blends. It is pointed out that one problem with miscible polymer blends is that of processing in the miscible state. In the case of immiscible blends, particularly ones containing liquid crystal polymers, the issue of adhesion of the two phases is discussed. Finally, the need for better theoretical models for predicting miscibility in polymer blends is highlighted.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Fluid phase equilibria of binary and ternary mixtures of supercritical carbon dioxide with tetradecanoic acid and docosane up to 43 MPa and 393 K: cosolvency effect and miscibility windows

Isothermal pressure (p)-mass fraction (w) phase diagrams were measured for CO₂ + tetradecanoic acid at six temperatures from 328.2 K to 373.2 K and for CO₂ + docosane at four temperatures from 343.2 K to 393.2 K as well as isobaric temperature (T)-mass fraction (w) phase diagrams for both systems at 34.5 MPa. In addition the isothermal and isobaric Gibbs phase prisms at 373.2 K and 34.5 MPa respectively were determined for the ternary system CO₂ + tetradecanoic acid + docosane, and and isobaric miscibility window was found between 333 K and 385 K at 34.5 MPa.     

PEO／EVA共混物的结构研究

ＰＥＯ以分散相形式存在于ＰＥＯ／ＥＶＡ共混物中，且具有部分相容性。Ｘ－射线衍射谱表明ＥＶＡ含有较强的ＰＥ衍射峰；ＰＥＯ／ＥＶＡ共混物既表现出ＰＥ的衍射峰也含有ＰＥＯ的晶面反射。随着ＰＥＯ的Ｍｎ的增加，ＰＥＯ／ＥＶＡ的Ｗｃ、ｘ增大且于时获得最大值：ＰＥ０／ＥＶＡ的Ｗｃ、ｘ值比纯ＰＥＯ的Ｗｃ、ｘ明显降低。     

Adsorption of the Ternary Liquid Mixture Ethanol/n-Octane/n-Hexadecane onto Activated Carbon: I. The Adsorption Excess of the Ternary Mixture and of Its Binary Combinations

The adsorption isotherms of the binary mixtures of ethanol/n-Octane, ethanol/n-hexadecane and n-octane/n-hexadecane onto the activated carbon TA 95 were measured at 278 K, 288 K, 298 K and 308 K and described with mathematical functions. About 300 experimental values of the adsorption excess of the ternary mixture ethanol/n-octane/n-hexadecane onto activated carbon TA 95 at 298 K were measured by gas chromatography inside the ternary triangle. The ternary miscibility gap was determined at three temperatures. A good representation of the ternary data and the calculated activity coefficients (using the UNIFAC model) in three-dimensional space was possible with the help of transformation of coordinates. It was possible, too, by utilization of the conception of the quasi two-component representation of the mole fractions with and without miscibility gap. Several influencing factors on ternary adsorption isotherms were discussed for the system ethanol/n-octane/n-hexadecane/TA 95.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300     

Novel luminescent liquid crystalline polyazomethines. Synthesis and study of thermotropic and photoluminescent properties

Novel semiflexible polyazomethines containing chromophoric units into azomethine mesogenic core have been synthesised by condensation of a flexible dialdehyde with mesogenic diamines containing fluorene, antraquinone, pyrimidine, azobenzene and benzophenone. The thermotropic behaviour of the resulting polyazomethines was assessed by differential scanning calorimetry, polarised light microscopy and investigations of the miscibility relations. While the pure polyazomethines showed a birefringent viscous texture difficult to be ascribed, by mixing with a liquid crystal dimer, clear Schlieren or marbled textures were observed, indicating a nematic mesophase. The polymers exhibited violet, blue or yellow light emission.     

Reactive blends derived from modified soybean oil and silicone

Reactive blends prepared from methoxysilane terminated silicone polymers and silylated soybean oil are described and characterized. Although simple mixing of soy and silicones results in gross phase separation, homogeneous polymeric products are obtained by introducing reactive sites. These products can be used as protective coatings, additives to adhesives and new sealants. Exposure of the mixtures to moisture leads to hydrolysis of the methoxysilanes and subsequent condensation of the resulting silanols that yields stable siloxane linkages between the two immiscible phases. FTIR, TGA, and swell‐gel analyses indicate effective formation of these siloxane crosslinks. Reactive blends containing less than 20% silylated oil appeared completely transparent but increasing the soy content decreased the optical transparency. SEM micrographs reveal the silicone polymer as the continuous phase with individual spherical silylated soy oil particles distributed in it. The properties of these reactive blends vary from high elongation elastomers to high modulus resins depending on the composition. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3086–3093