Model Development in Thermal Styrene Polymerization

Summary: The thermal polymerization of styrene is usually modeled by relying on a reaction scheme and a set of equations that were developed more than three decades ago by Hui and Hamielec. Many detailed models of styrene polymerization are available in the open literature and they are mostly based on the work of Hui and Hamielec, which nearly makes this the standard to follow in explaining the behavior of polystyrene reactors. The model of Hui and Hamielec does a very nice job of describing monomer conversion data but discrepancies are seen between observed and predicted values of number and weight average molecular weights, M_n and M_w. Discrepancies in number average molecular weight seem to be the result of random noise. Discrepancies in weight average molecular weight grow as the polymerization temperature decreases and some of the trends observed in the residuals over the entire temperature range cannot be attributed to random noise. Hui and Hamielec attributed the observed deficiencies to a standard deviation of ±10% in their GPC measurements. A new data set with an experimental error of 2% for average molecular weights is presented. The set contains measured values of M_n, M_w and M_z, so the polymerization scheme has been extended to include third order moments. The data set also includes the effect of ethylbenzene as a chain transfer agent. We present the results of comparing model predictions to our measurements and the adjustments made in the original set of kinetic parameters published by Hui and Hamielec.     

Synthetic glycopolymers: an overview

Glycopolymers, synthetic sugar-containing macromolecules, are attracting ever-increasing interest from the chemistry community due to their role as biomimetic analogues and their potential for commercial applications. Recent developments in polymerisation techniques have enabled the synthesis of glycopolymers featuring a wide range of controlled architectures and functionalities. This review covers the syntheses of pendant carbohydrate-carrying linear polymers and their subsequent properties.     

Grafting of glycidyl methacrylate onto polypropylene using supercritical carbon dioxide

Free-radical grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) films has been studied using supercritical carbon dioxide (SC-CO₂) as a solvent and a swelling agent. As the reaction temperature was below the melting point, PP was modified in the solid phase. The PP film was first soaked with the monomer GMA and benzoyl peroxide (BPO) as an initiator using SC-CO₂ at different experimental conditions of pressure, temperature, and thermal treatment time. After releasing CO₂, film GMA molecules were grafted onto PP in different times. Using this method, the degree of grafting and the morphology could be controlled through the combination of pressure, temperature, and soaking time. FTIR spectra confirmed that GMA had been grafted onto PP and that polypropylene-graft-glycidyl methacrylate (PP-g-GMA) presented a high surface reactivity for conductive polyaniline anchoring. DSC measurements and TG analyses showed that the thermal profiles of the graft copolymer and virgin PP are quite similar and that the graft PP does not exhibit changes in terms of thermal degradation profile and melting temperature, respectively. X-ray data showed that a high degree of grafting leads to a lower degree of crystallinity of polypropylene.     

The synthesis, coordination chemistry and ethylene polymerisation activity of ferrocenediyl nitrogen-substituted ligands and their metal complexes

Treatment of aminoferrocene with substituted 2-hydroxybenzaldehydes yields the air- and moisture-stable ligands 1–4, which were then reacted to form the chromium dichloride complexes 5–7 and the nickel bis-chelate species 8 and 9. The metal compounds are very air-sensitive but the chromium compounds act as pre-catalysts for the polymerisation of ethylene. Reaction of 1,1′-bis(amino)ferrocene with similarly substituted 2-hydroxybenzaldehyes or simple benzaldehyde gives the ligands 10–12 and 17, respectively. The X-ray crystal structure of 11 shows the molecule to have non-crystallographic C₂ symmetry and to be linked by C–Hπ interactions between the anthracene rings. Titanium-containing complexes 13–16 can be formed utilising ligands 10–12 and there is a change in geometry within the complexes dependent on the adjacent co-ligands, whilst ligand 17 can be reacted with PdClMe(COD) to form the chelate complex 18. Cyclic voltammetric studies have been carried out on 18 and its oxidised analogue 19, but both complexes are inactive towards ethylene polymerisation.     

XPS characterisation of core-shell silica-polymer composite particles synthesised by atom transfer radical polymerisation in aqueous media

Near-monodisperse, siloxane-functionalised silica particles are used as a colloidal substrate for the surface-initiated polymerisation of various hydrophilic methacrylates: oligo(ethylene glycol) methacrylate (OEGMA), 2-(N-morpholino)ethyl methacrylate (MEMA), and ammonium 2-sulfatoethyl methacrylate (SEM) by atom transfer radical polymerisation in aqueous media at room temperature. The bulk and surface compositions of the resulting composite particles were assessed using various techniques. Thermogravimetric analysis of the resulting silica-polymer composites indicated polymer loadings of 5.4-8.6%, depending on the nature, structure and target degree of polymerisation (D_p). Dynamic light scattering studies indicate increases in hydrodynamic diameter of 14-87 nm compared to the reference silica particles. FT-IR spectroscopy confirmed additional features characteristic of the carbonyl group and pendant end-chain functionalities of the methacrylic polymer chains. The elemental and chemical surface compositions of the initial silica particles and final polymer-grafted composite particles were extensively investigated by X-ray photoelectron spectroscopy (XPS). The composite particles had appreciably higher C/Si atomic ratios, compared to the original initiator-functionalised silica particles, and these ratios increased with increasing target D_p. In addition, close inspection revealed that the relative intensities of the various components of the peak-fitted C1s envelopes varied significantly, depending on the target degree of polymerisation and the chemical structure of the methacrylic monomer. Moreover, in the case of the MEMA and SEM polymerisations, new nitrogen (MEMA) and sulfur (SEM) XPS signals were detected. This XPS study confirmed the presence of a thin outer layer of grafted polymer chains surrounding the silica particles.     

发射富里叶红外光谱法对氰酸酚酯树脂聚合的跟踪检测(英文)

本文研究了发射富里叶红外光谱对氨酸酚酯树脂聚合过程的跟踪检测技术。与目前普遍应用的透射红外光谱相对照，该方法给出可靠的结果。该技术尤其对低挥发性的树脂更适用。文中还讨论了有关光谱的获得及数据的处理问题。     

A supramolecular polymerisation model for the structurisation of DNA–lipid complexes

Complexes formed by DNA and lipid mixtures have great interest for the assessment of self-assembling mechanisms in open biological systems. X-ray diffraction has revealed that minor alterations of the cationic/neutral lipid composition produced major alterations to the liquid crystalline structure and the hydration of the complexes. We have extended to these systems by an approach based on the identification of a fundamental repeating unit that grows according to the general principles of supramolecular polymerisation and liquid crystallinity. Structural reorganisations that optimise the electrostatic and hydrophobic compensation are enhanced by competition between the rigidity of the polyelectrolyte and the cohesion of the lipid assembly. The non-hydrated hexagonal structure revealed by X-ray examination is represented by a dendritic-type supramolecular polymerisation of DNA units decorated by the aliphatic tails of dissociated liposomes. An increase in the cationic/neutral lipid component ratio enhances the stability of planar bilayers, favouring the formation of the partly hydrated lamellar structure revealed by X-ray diffraction.     

Synthesis and characterisation of star-shaped liquid crystalline polymer with a POSS core

The star-shaped POSS-graft-LCP with POSS as the core and liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate}, as arms was prepared by atom transfer radical polymerisation technique using octa(3-chloropropyl) polyhedral oligomeric silsesquioxane [POSS-(CH₂CH₂CH₂Cl)₈] as initiator. For comparison, the linear liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate} (LLCP), was obtained by conventional radical polymerisation. Both liquid crystal polymers were characterised by FT-IR, ¹H NMR, ¹³C NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarised optical microscopy and X-ray diffraction analysis. The liquid crystal phase behaviour research demonstrated that both liquid crystal polymers were reversible thermotropic nematic liquid crystal materials. The number of polymerisation degree of every arm attached on POSS in POSS-graft-LCP impacted greatly on the liquid crystal properties and only a small one was necessary for it to exhibit a broad liquid crystal range. Results further demonstrated that the special star-shaped topology of POSS and the eight arms attached helped POSS-graft-LCP form and stabilise liquid crystal phase easily. This research may further expand the way to star-shaped LCPs by employing a variety of (meth)acrylate and other vinyl liquid crystalline monomers.     

Synthesis of multi-arm-star polyglycidols of different architecture grafted with polyacrylate side arms

Well defined linear and 3-, 4-, and 6-arm-star shaped polyglycidols were obtained via anionic ring-opening polymerisation of ethoxyethyl glycidyl ether using 3-phenyl-1-propanol, trimethylolpropane, di(trimethylolpropane, and dipentaerythrite as initiator followed by the removal of the acetal protection group via acid catalysed hydrolysis. The microstructure and architecture of the polymers was proven by NMR spectroscopy, size exclusion chromatography and MALDI-TOF-MS. Multifunctional initiators for the atom transfer radical polymerisation were obtained by esterification of the hydroxyl groups of the polyglycidols with α-bromoisobutyryl bromide. Kinetic studies of the ATRP of tert-butyl acrylate and methyl acrylate revealed a controlled synthesis of linear and multi-arm-star polyglycidols of different architecture grafted with polyacrylate side arms.