A microfocus X‐ray fluorescence beamline at Indus‐2 synchrotron radiation facility

A microfocus X‐ray fluorescence spectroscopy beamline (BL‐16) at the Indian synchrotron radiation facility Indus‐2 has been constructed with an experimental emphasis on environmental, archaeological, biomedical and material science applications involving heavy metal speciation and their localization. The beamline offers a combination of different analytical probes, e.g. X‐ray fluorescence mapping, X‐ray microspectroscopy and total‐external‐reflection fluorescence characterization. The beamline is installed on a bending‐magnet source with a working X‐ray energy range of 4–20 keV, enabling it to excite K‐edges of all elements from S to Nb and L‐edges from Ag to U. The optics of the beamline comprises of a double‐crystal monochromator with Si(111) symmetric and asymmetric crystals and a pair of Kirkpatrick–Baez focusing mirrors. This paper describes the performance of the beamline and its capabilities with examples of measured results.     

An Approach for Microprobe Measurement and Modeling for Millimeter-Wave Application

This paper describes a simple method to check the performance of microprobe. The two-port S-parameters of the microprobe are determined by one-port S-parameters measurement using HP 8510XF Network Analyzer. Based on the measurement, an equivalent circuit model for the microprobe is presented and good agreement between the measurement results and modeling results is obtained.     

Composition of vanadium carbides formed by solidification in ternary Fe-V-C alloys

The solidification behaviour of Fe-V-C alloys, was studied by differential thermal analysis. The composition and the nature of the phases were analysed by quantitative electron probe microanalysis and X-ray diffraction. Accurate microanalysis of carbon in vanadium carbides (VC_x and V₂C) were performed. A liquidus projection of the system Fe-V-C in the Fe-V rich region was proposed.     

电子探针自动连续分析硅酸盐中存在问题的研究

目前,电子探针已成为分析硅酸盐样品的一种重要仪器,新型仪器都可以自动连续分析,大大提高了工作效率,可是定量分析的准确度往往不太高,尤其SiO_2经常偏低。我们以剖析SiO_2分析存在问题出发,讨论了造成误差较大的原因并提出克服的方法     

Laser microprobe mass analysis (LAMMA) of pyridine adsorbed on some clay minerals from Turkey

Using laser microproble mass analysis (LAMMA), it is possible to characterize the inorganic composition of clays and to study adsorption phenomena. Natural sepiolite, (Na-sepiolite), montmorillonite and saponite samples from Anatolia (Turkey) have been investigated. All the clays gave different fingerprint mass spectra which allowed a quick estimation of the relative amounts of exchangeable cations as well as the trace contaminants and the homogeneity of their distribution. The adsorption behaviour of these clays for pyridine was also studied and it appeared that pyridine molecules penetrated the inner layers, as well as being adsorbed on the external surface.     

A high-sensitivity laser microprobe mass analyzer

A laser microprobe mass analyzer has been developed. It is intended for application in biomedical and physiological research. A frequency-doubled ruby laser is focussed through an incident light microscope to a spot of minimally 0.5 μm in diameter on a thin section specimen of 0.1–1.5 μm thickness. The microplasma generated from the irradiated volume is analyzed in a time-of-flight mass spectrometer recording the complete spectrum for each shot. From lithium doped epoxy resin (5 ppm by weight), used as an organic standard, 1.4×10⁻¹⁹g or 1.4×10⁴ atoms of the⁶Li isotope have been detected. This sensitivity corresponds to that of ion microprobes but is at least an order of magnitude higher than obtained with electron probe X-ray microanalyzers.     

Microprobe analysis of low alloyed sintered steels

Homogenization of Mo, W and Cr in alloyed P/M carbon steels during sintering with a transient liquid phase has been investigated by microscopic and microanalytical means. The reaction was found to start with carburization of the VIa metal, continues with the formation of different carbides, and generation of a liquid phase between the carbide and -Fe. The steady state equilibrium remains stable until all VIa metal has been consumed. Microprobe analysis was found to yield optimum results if selected model samples, in which homogenization should not proceed too fast, are investigated.Dedicated to Professor Günther Tölg on the occasion of his 60th birthday     

Granitic groundwater colloids sampling and characterisation: the strategy for artefact elimination

Colloids were separated by submicro-filtration of granitic groundwater samples collected at-line under in-situ thermodynamic conditions after down-hole groundwater sampling and transfer at the well head. The methodology avoids the generation of artefacts produced by pH changes due to CO(2) exchange, yielding potential carbonate precipitation, or by O(2) contamination yielding oxidized insoluble phases. The enhanced pressure and the anoxic conditions are also maintained through the filtering procedure. This procedure was carried out after a period of regular sampling of groundwater pumped to the ground surface and continuous on-line long-term measurements (weeks, months) of chemical and physical parameters in the unbroken sample water both at the ground surface and at depth down-hole. Colloid samples were characterized on the submicro-filtration membrane by scanning electron microscopy. Under deep granite groundwater conditions, natural colloids occur sparsely. The colloid concentration was determined C(col) approximately 1 and approximately 50 microg L(-1) for sizes ranging from 50 to 200 nm or n(col) approximately 3.9 x 10(9) and 47 x 10(9) L(-1) for sizes larger than 50 nm for KFM11A, Forsmark, and KLX17A, Laxemar, Oskarshamn, respectively, Sweden. These colloids are expected to be clay particles with an average size smaller than 200 nm for the Na-Ca-Cl and Na-Cl groundwaters (pH 7.6 and 8.00, ionic strength approximately 10(-1) and approximately 10(-2) mol L(-1), respectively, for KFM11A and KLX17A), the colloid concentrations were comparable with values previously reported in the literature.     

核子微探针在医学和生物学中的应用

生命科学中微量元素研究需要发展一种能在细胞水平上测量生物组织中元素分布的仪器或技术,核子微探针的发展使这种研究成为可能。本文简述了核子微探针的最新发展及其在医学、细胞药物学和细胞谱系中的某些应用。     

钴电极在碱性溶液中氧化还原反应的现场共聚焦显微喇曼光谱研究

采用现场共聚焦显微喇曼光谱研究钴电极在碱性溶液中的氧化还原行为和生成物的喇曼光谱特征.研究结果表明:电位正向扫描时,在-0.64V左右Co氧化生成Co(OH)₂和CoO,随着电位正移逐步生成Co₃O₄,在正电位区电极表面层主要是Co₃O₄、CoOOH和CoO₂等;电位负向扫描时,电极表面上的高价含氧化合物相继还原为Co₃O₄和Co(OH)₂,并最终还原为Co.由不同电位下的生成物的喇曼光谱可以看出:电极表面上的氧化还原反应是随电位变化而逐步进行的连续化反应过程,并主要形成复合含氧化合物.