Hierarchical structure in polymer‐based drug delivery systems as probed by calorimetric measurements

Thermoporosimetry (TPM), a differential scanning calorimetry technique that relies on the shift of transition temperatures caused by the confinement of liquids, was applied to elucidate the complex morphology of drug‐loaded polymeric microcapsules prepared by the emulsion solvent evaporation method. For the very first time, TPM has been applied simultaneously with two liquids as structural probes. It was found that Miglyol, which dissolves the selected drug (Ibuprofen), is confined inside vesicles having a mean radius of 26.3 nm, whereas water, which is the continuous phase, is trapped inside a swollen polymeric network of Eudragit with an average mesh radius of 1.7 nm. A proposed hierarchical structure is given, which predicts that Eudragit microcapsules are formed from a collection of inert oil vesicles partitioned by polymeric Eudragit membranes swollen by water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1939–1945, 2010     

Detection of copper(II) sulfate’s uniformity and its thermal behavior in flammability of cotton fabric

Blue vitriol (copper(II) sulfate pentahydrate), CuSO₄·5H₂O has been chosen and investigated for its effectiveness as a flame-retardant, when impregnated into cotton fabric (cotton with a plain structure; woven 180 g m⁻², with 22 numbers of yarns per 10 mm). Using the vertical flame test, the extent of resistance to burning of the specimens has been determined. The impregnation was accomplished via dipping and stirring of bone-dried, weighed fabrics into the individual and suitable concentrations of the salt at room temperature. Afterwards the samples were squeeze rolled and dried horizontally at 110°C for 30 min in an oven and cooled in a desiccator and reweighed with an analytical precision. They were then kept under ordinary conditions overnight prior the fulfillment of the vertical flame test. The efficient quantities of the aforesaid salt expressed in g per 100 g dry fabric have been determined in an average figure of 12.75%. Estimation of uniformity in a selected sample was carried out via a spectrophotometer and results are in favor of the heterogeneous distribution of the salt in the fabric’s middle sectors. However initial and final parts of specimen showed to be rather uniformed. Thermogravimetric analysis of the pure cotton and the treated ones with insufficient and effective amounts of the salt were fulfilled and their thermograms were compared and commented. The results obtained for the effect of copper(II) sulfate comply with ‘The Dust or Wall Effect Theory’. This action is also assigned to the condensed phase retardation.     

Participation of ions in promoting intermolecular associations of cell wall polysaccharides

The physiological functions of the two ions, Ca²⁺ and H⁺, in controlling mechanical properties of plant cell wall are reviewed. The interactions of these ions with major cell wall polysaccharides during cell growth and development are described. Experimental results for Ca²⁺/H⁺-induced molecular associations of some polysaccharides in solutions are also given. This article aims to bridge the understandings of molecular associations in solutions (in vitro) with those occurring in cell wall matrix of high order structure (in vivo).     

The delay of transition of a laminar boundary layer over compliant wall

In a previous paper^[1], a method has been developed to study the stability characteristics of laminar boundary layers over compliant walls. In this paper, the effect of double layered compliant wall and Kramer type compliant wall on delaying the transition is investigated, and it is shown that there does exist the possibility to delay the transition by applying such compliant walls. The project supported by the National Natural Science Foundation of China.     

Interaction of SWCNT and PPTA with sulfuric acid—Compatibilization of two materials in a common solvent

The results of a calorimetric study on the melting and crystallization behavior of concentrated sulfuric acid containing dispersed single wall carbon nanotubes (SWCNT), dissolved water, and dissolved poly‐p‐phenyleneterphthalate (PPTA) polymer are presented. The measured reduction of the heat of crystallization is caused by the build‐up of an associated layer of structured acid molecules around SWCNT and PPTA. The freezing point depression is related to the number of dissolved species such as ions. It is shown that this theory accurately describes the experimental data for dissolved water and sulfur trioxide, but not for large molecules such as SWCNT. A mechanism for the interaction between sulfuric acid and SWCNT is proposed, based on preferred adsorption of sulfur trioxide and dissociation of sulfuric acid, leading to an increased number of dissolved low‐molecular‐weight species. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1914–1922, 2008     

Geometry dependence of the viscosity of a thermotropic LC-polymer measured by slit dies

This paper reports on geometry dependent viscosity curves of the biaxial thermotropic LC-Polymer Vectra B 950 measured with rectangular slit dies. The geometry dependence of the flow behaviour originates from the flow of two layers. The layer near the wall is highly flow oriented and free from defects. The layer in the bulk has an ordered texture. The thickness of the wall layer decreases with wall shear stress. Based on the Frank theory and the assumption that the core of a moving disclination is the smallest radius of distortion, the wall layer thickness is predicted and compared with experimental data.     

Temperature Effect on Power for Particle Detachment from Pore Wall Described by an Arrhenius-Type Equation

An Arrhenius-type asymptotic-exponential function is derived to describe the temperature dependence of the power needed for detachment of fine particles from pore walls in porous media.     

动脉瘤内流场以及瘤体尺寸的影响的数值研究

采用计算流体动力学(CFD)数值模拟的方法,在周期性脉动速度入流条件下,建立刚性动脉瘤模型并研究了动脉瘤模型中流场的特征(速度、压力、壁面剪切应力)。得到了脉动入流一个周期内流场特征的变化规律,发现动脉瘤的后端有相当高的压力和壁面剪切应力,而且高压力和壁面剪切应力分布的位置几乎是固定的。探讨了不同动脉瘤尺寸对内部流场的影响,动脉瘤的直径与瘤体长度之比越大,瘤壁承受的剪切应力就越大,动脉瘤破裂的危险性就越高。     

Pulsatile flows in a lateral aneurysm anchored on a stented and curved parent vessel

We present particle tracking velocimetry measurements and flow visualization of pulsatile flow fields in a stented cerebrovascular lateral aneurysm model with a wide ostium anchored on a curved parent vessel. Among the stent parameters, the blocking ratioC _α ranging from 0% to 75% was selected to study its effect on the changes of intra-aneurysmal hemodynamics for the reference of minimally invasive endovascular aneurysm treatment. The Womersley number was 3.9 and the mean, peak, and minimal Reynolds numbers based on the bulk average velocity and diameter of the parent vessel were 600, 850, and 300, respectively. The results are characterized in terms of velocity vector field, coded streak images, region averaged velocity, vorticity, and wall shear stress. A critical range ofC _α related to the inflow location as well as the shape and number of intra-aneurysmal vortices is identified. The intra-aneurysmal flow activity, vortex strength, and wall shear stress are found to decrease with increasingC _α. Among theC _α examined,C _α=75% is the most favorable in attenuating the risk of aneurysmal rupture and promoting intra-aneurysmal thrombus.     

Large-Scale Streamwise Vortices in the Supersonic Part of a Permeable Nozzle

Large-scale streamwise vortices in the vicinity of a perforated wall in the supersonic part of the nozzle are studied. The governing effect of gas inflow through a perforated wall on origination and parameters of streamwise vortices is experimentally established.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 68–75, September–October, 2005.