Studies on the Effects of Additional Components on Micellization of CTAB via Surface Tension Measurements

The effects of Tris-HCl buffer solution on the cmc of cetyltrimethylammonium bromide (CTAB) were studied by surface tension measurement. The result shows that the effect of the buffer solution depends on the interaction between CTAB and NaCl and the structure accelerants of water, Tris. A series of parameters, including the critical micelle concentration (cmc), the surface tension at cmc (γ_cmc), the adsorption efficiency (pC₂₀), and the effectiveness of surface tension reduction (∏_cmc) were obtained from the surface tension measurements in the presence of glycine with different concentration in the Tris-HCl buffer solution at 27°C. In addition, maximum surface excess concentration (Γ _max) and minimum surface area per molecule (A_min) at the air-water interface were estimated according to the Gibbs adsorption isotherm. The thermodynamic parameters (Δ C _p,m , Δ H _m,tr , Δ C _p,m,tr ) of micellization for CTAB in the absence and presence of glycine at different temperature were also been obtained.     

Aggregation Behavior of Pluronic-L64 in Presence of Sodium Dodecyl Sulphate in Water

The effect of sodium dodecyl sulfate (SDS) on the micellization and aggregation behavior of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO₁₃ PO₃₀ EO₁₃) have been investigated by various techniques like, cloud point, viscosity, isothermal titration calorimetry (ITC), differential scanning calorimetry (DSC), fluorescence spectroscopy, room temperature phosphorescence (RTP), and small angle neutron scattering (SANS). Addition of SDS in L64 solutions shows mark alteration of different properties. We observed synergistic interaction between SDS and Pluronic L64. The changes in the critical micelle concentration (CMC), critical micelle temperature (CMT), cloud point (CP), micelle size, and shape has been correlated and reported in terms of structure dynamics and mechanics. The ITC titrations have been used to explore the different stages of binding and interactions of SDS with L64. The enthalpies of aggregation for copolymer-SDS aggregates binding, organizational change of bound aggregates, and the threshold concentrations of SDS in the presence of copolymer were estimated directly from ITC titration curves. The effect of temperature on enthalpy values has been reported in terms of different aggregation state. Fluorescence and RTP for L64 were used to investigate the change in micellar environment on the addition of SDS at different temperature. Appearance and shifting of SANS peaks have been used to monitor the size and inter micellar interaction on addition of SDS in L64 solution. Cloud point and viscosity elaborate the penetration of SDS molecule in L64 micelle and hence changing the micellar architect.     

Effects of Inorganic Salts on Micellization and Solubilization in an Aqueous Solution of Poly(ethylene oxide)/Poly(propylene oxide)/Poly(ethylene oxide) Triblock Copolymer

The effects of inorganic salts on micellization and solubilization of prednisolone in aqueous solution of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymer (Pluronic P85) were studied. The effect of inorganic salts on decrease in the cloud point and the critical micelle concentration (cmc) of Pluronic P85 was the order of Na₂HPO₄ > NaH₂PO₄ > NaCl > NaBr. Moreover, it was found that Pluronic P85 forms two kinds of micelles: monomolecular micelles and polymolecular micelles. The polymolecular micelle increased with increasing amount of added inorganic salts. Moreover, solubilization behavior is explained from the standpoint of salting out for prednisolone and association characteristics of Pluronic P85.     

Use of the Bell–Evans–Polanyi Principle to predict regioselectivity of nucleophilic aromatic photosubstitution reactions

Regioselectivity of nucleophilic aromatic photosubstitution has been shown experimentally to depend upon activation energies of the competing transition states. Computational means of determining relative activation energies were sought, therefore, in order to predict regioselectivity. Optimization of the three triplet transition states of 2-chloro-4-nitroanisole with hydroxide ion gave energies of insufficient accuracy to predict regioselectivity. Computed enthalpy changes from the first triplet transition state to the triplet σ-complexes correlated precisely with the experimental activation energies. This exemplifies the Bell–Evans–Polanyi Principle, and it provides an accurate means of assessing regioselectivity.     

Computational studies on two novel energetic nitrogen‐rich compounds based on tetrazolone

Two novel energetic nitrogen‐rich compounds 1,4‐diaminotetrazol‐5‐one ( DATO ) and 1,4‐dinitrotetrazol‐5‐one ( DNTO ) were proposed first and studied by quantum chemistry method with B3LYP/6‐31G* level of theory. The optimized geometry, IR predicted spectrum and thermochemical parameters, frontier molecular orbitals and molecular electrostatic potential were calculated for inspecting the electronic structure, molecular stability and chemical reactivity. The important macroscopic properties including density, enthalpy of formation, detonation parameters and impact sensitivity have been predicted as well. As a result, two designed compounds DATO and DNTO possess positive enthalpy of formation (395.79 and 342.77 kJ/mol), impressive detonation parameters (D = 8.80 km/s, P = 33.69 GPa; D = 8.89 km/s, P = 34.98 GPa) superior to the remarkable explosive RDX, acceptable sensitivities and might be promising candidates of energetic materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Enhanced Thermal Oxidation Stability of Reduced Graphene Oxide by Nitrogen Doping

Nitrogen‐doped reduced graphene oxide (N‐doped RGO) samples with a high level of doping, up to 13 wt. %, have been prepared by annealing graphene oxide under a flow of pure ammonia. The presence of nitrogen within the structure of RGO induces a remarkable increase in the thermal stability against oxidation by air. The thermal stability is closely related with the temperature of synthesis and the nitrogen content. The combustion reaction of nitrogen in different coordination environments (pyridinic, pyrrolic, and graphitic) is analyzed against a graphene fragment (undoped) from a thermodynamic point of view. In agreement with the experimental observations, the combustion of undoped graphene turns out to be more spontaneous than when nitrogen atoms are present.     

Theoretical modeling of the chemical synthesis and detonation performance of polynitrocubane derivatives

Theoretical work was performed based on experimental methods described in the literature to simulate and explore feasible routes for the synthesis of energetic octanitrocubane (ONC) and polynitrocubane derivatives. In respective gaseous and liquidous environments, using cubane as the raw material, ONC was successfully synthesized through carboxylation, amination, oxidation and nitration stages, and the related reaction energy barriers were simultaneously acquired. In particular, the polyparametric calibrated gaseous molecular formation enthalpy and the group additivity approach-estimated molecular density were incorporated using the Kamlet-Jacobs equation to evaluate the detonation performance of polynitrocubane derivatives. Some high-energy-density derivatives were found to have superior characteristics as compared with traditional hexagon (RDX) and octagon (HMX) explosives.     

Enthalpy relaxation in a partially cured epoxy resin

The enthalpy relaxation of a partially cured (70%) epoxy resin, derived from diglycidyl ether of bisphenol-A cured by methyl-tetrahydrophthalic anhydride with accelerator, has been investigated. The key parameters of the structural relaxation (the apparent activation energy Δh*, the nonlinearity parameter x, and the nonexponentiality parameter β) are compared with those of the fully cured epoxy resin. The aging rates, characterized by the dependences of the enthalpy loss and peak temperature on log(annealing time), are greater in the partially cured epoxy than they are in the fully cured resin at an equivalent aging temperature (T_a = T_g − 20°C). There is a significant reduction in Δh*, from 1100 kJ mol⁻¹ for the fully cured system to 615 kJ mol⁻¹, as the degree of cure is reduced. The parameter x determined by the peak-shift method appears essentially independent of the degree of cure (x = 0.41 ± 0.03 for the partially cured resin compared with 0.42 ± 0.03 obtained previously for the fully cured resin), and does not follow the usually observed correlation of increasing x as Δh* decreases. This invariability of the parameter x seems to indicate that it is determined essentially by the local chemical structure of the backbone chain, and rather little by the supramolecular structure. On the other hand, the estimated nonexponentiality parameter β lies between 0.3 and 0.456, which is significantly lower than in the fully cured epoxy (β ≅ 0.5), indicative of a broadening of the distribution of relaxation times as the degree of cross-linking is reduced. Like the parameter x, this also does not follow the usual correlation with Δh*. These results are discussed in the framework of strong and fragile behavior of glass-forming systems, but it is difficult to reconcile these results in any simple way with the concept of strength and fragility. © 1996 John Wiley & Sons, Inc.     

Experimental and Theoretical Investigation on the Thermochemistry of 3-Methyl-2-benzoxazolinone and 6-Nitro-2-benzoxazolinone

The determination of the reliable thermodynamic properties of 2-benzoxazolinone derivatives is the main goal of this work. Some correlations are established between the energetic properties determined and the structural characteristics of the title compounds, and the reactivity of this class of compounds is also evaluated. Static-bomb combustion calorimetry and high-temperature Calvet microcalorimetry were used to determine, respectively, the standard molar enthalpies of formation in the solid state and the standard molar enthalpies of sublimation, both at T = 298.15 K. Using the results obtained for each compound, the respective gas-phase standard molar enthalpy of formation was derived. High-level quantum chemical calculations were performed to estimate the same property and the results evidence good accordance. Moreover, the gas-phase relative thermodynamic stability of 2-benzoxazolinone derivatives was also evaluated using the respective gas-phase standard molar Gibbs energy of formation. In addition, the relationship between the energetic and structural characteristics of the benzoxazolinones is presented, evidencing the enthalpic increments associated with the presence of a methyl and a nitro groups in the molecule, and this effect is compared with similar ones in other structurally related compounds.