Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

简法合成甲地孕酮

本文报道了合成甲地孕酮的简便方法,即以17α-乙酰氧基-黄体酮(3)为原料,将其烯醇醚(4)经Mannich反应,或将△~(3,5)-3,17α-二乙酰氧基-黄体酮(2)与二乙氧基甲烷反应,生成6-次甲基-17α-乙酰氧基-黄体酮(5),然后将5用钯/碳酸钙作催化剂转位得目的物甲地孕酮(6b),总收率分别为56%和50%(均以17α-羟基-黄体酮(1)为起始物)。     

有机相中α-氰基-3-苯氧基苄醇乙酯的酶促醇解反应

研究了有机相中脂肪酶催化α-氰基-3-苯氧基苄醇乙酯的醇解化反应。制备α -氰基-3-苯氧基苄醇。考察了酶、溶剂、醇、醇用量、溶剂水含量以及底物浓度等 因素对反应的影响，结果表明Novozym435脂肪酶催化活性最高，经实验确定的最佳 条件为：脱水甲苯为溶剂，正辛醇为酰基受体，正辛醇、酯的摩尔比为1.5:1，酶 量为8 mg/mL时的最佳底物浓度为108.13 mmol/L，在上述条件下反应30 h酯的转化 率 > 96%。     

环丙基甲基酮的合成研究进展

环丙基甲基酮是合成环丙氟哌酸类广谱抗菌药物和抗艾滋特效药依法韦仑的重要中间体,在医药、化工及农林等领域均有广泛应用。环丙基甲基酮的合成方法大致分为4类,分别以酮类、酯类、醇类及呋喃有机物为原料,在一定条件下生成环丙基甲基酮粗品,经萃取及精馏得到环丙基甲基酮纯品。本文综述了环丙基甲基酮的合成研究进展。     

Analysis of dielectric observations of KCl-charged poly(methyl methacrylate) microcapsules using a two-component model consisting of KCl-permeable and KCl-impermeable capsules

Dielectric measurements were carried out on aqueous suspensions of poly(methyl methacrylate) microcapsules charged with KCl solutions to examine the KCl permeability of the microcapsules. The specimens exhibited three kinds of dielectric relaxation. Two kinds of dielectric relaxation were observed immediately after washing the specimens with distilled water. These overlapped each other when the specimen was left standing in the measuring cell for a long time. Their relaxation frequencies were affected by the KCl concentration of the suspending medium in which the specimen was kept before washing. Another relaxation was observed distinctly when the spepcimens were washed thoroughly with distilled water. Its relaxation frequency was affected by the KCl concentration of the charged solution. These results were explained by assuming that the specimens were mixtures of KCl-permeable and KCl-impermeable capsules. The theoretical analysis procedure was devised in the light of dielectric theory of interfacial polarization to estimate the parameters which characterize the structure of the specimens.     

A mild, highly selective and remarkably easy procedure for deprotection of aromatic acetates using ammonium acetate as a neutral catalyst in aqueous medium

Ammonium acetate was found to catalyze efficiently the selective deprotection of aromatic acetates in the presence of various sensitive functionalities in aqueous methanol under neutral conditions at room temperature to yield the corresponding phenols in excellent yields. The method has been utilized for deprotection of acetates of several naturally occurring bioactive phenolic compounds and for preparation of venkatasin, a natural coumarino-lignan, from the anticancer compound cleomiscosin A.     

A Rapid and Convenient Synthesis of Derivatives of Imidazoles under Microwave Irradiation

An efficient and a quick microwave‐assisted synthesis of benzimidazoles and trisubstituted imidazoles was developed. Three benzimidazoles were obtained as a result of the condensation of 1,2‐phenylenediamine with carboxylic acids and acetoacetic ester without catalyst. A series of trisubstituted imidazoles were synthesized by condensation of benzil, aromatic aldehyde and ammonium acetate in the presence of glacial acetic acid.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.