The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties

The disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposites were obtained in a two-stage process by the in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The dispersed behavior of the LDH-U in the PMMA matrix was identified by using X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV/visible transmission spectroscopy. All these nanocomposites showed significantly enhancement of glass transition temperature (T_g) and the decomposition temperatures compared to pristine PMMA, as identified in differential scanning calorimetry (DSC) and thermogravimetric (TGA) analysis. The tensile modulus of these nanocomposites was also enhanced by incorporating the LDH-U into the PMMA matrix and increased as the amount of LDH-U increased. According to the analytical method of Ozawa-Flynn, the degradation activation energies of these nanocomposites are higher than that of pristine PMMA.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Advances in Organophosphorus Chemistry Based on Dichloro(methyl)phosphane

Besides phosphorus trichloride and phosphane, dichloro(methyl)phosphane is gaining importance as a starting material for the synthesis of organophosphorus compounds. It provides ready access to phosphonic, phosphinic and phosphonous acid derivatives, as well as their secondary products. The synthetic and application potential of organophosphorus compounds—based on industrially produced dichloro(methyl)phosphane—is illustrated by means of numerous examples.     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

Determination of levodopa methyl ester and its metabolites in rat serum by CZE with amperometric detection

A reliable and reproducible method, capillary zone electrophoresis with amperometric detection (CZE–AD), has been developed for separation and quantification of levodopa methyl ester (LDME) and its biotransformation products levodopa (L-DOPA) and dopamine (DA) in rat serum. A carbon-disk electrode was used as working electrode. The optimum conditions for CZE detection were 50 mmol L^–1 phosphate solution at pH 7.0 as running buffer, 17 kV as separation voltage, 1.0 V (vs Ag/AgCl, 3.0 mol L^–1) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 2.4×10^–2 to 2.2 g mL^–1 for LDME, 2.9×10^–1 to 49.5 g mL^–1 for L-DOPA, and 1.4×10^–2 to 1.5 g mL^–1 for DA with correlation coefficients of 0.9997, 0.9994, and 0.9999, respectively. The detection limits for LDME, L-DOPA, and DA were 14.6, 98.0, and 9.7 ng mL^–1, respectively. Recoveries were 80.3% for LDME, 93.5% for L-DOPA, and 86.5% for DA. This method was applied to serum samples after intravenous injection of LDME and L-DOPA to rats.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

Ag/ZrO2催化剂上的1,2-丙二醇选择性气相氧化反应

采用浸渍法制备了一系列Ag/ZrO₂催化剂, 考察了Ag/ZrO₂催化剂对1,2-丙二醇选择性氧化合成丙酮醛反应的催化性能. 实验结果表明: 在原料气配比为V(N₂)∶V(O₂)＝300∶19, n(O₂)/n(alcohol)＝1.2, 反应物液时空速为3.2 g/(g•h), 反应温度为673 K时, 1,2-丙二醇选择性氧化合成丙酮醛反应的转化率为95.7%, 选择性为55.3%, 高于传统电解银催化剂. UV-Vis DRS和XPS的研究结果表明: 在Ag/ZrO₂催化剂上存在大量的Ag^＋和Ag_n^δ＋有利于促进催化活性的提高.     

甲基绿－萃取光度法测定锑

本文用Ｃｅ（ＳＯ＿４）＿２作氧化剂，在６ｍｏｌ／Ｌ　ＨＣｌ溶液中将Ｓｂ（Ⅲ）氧化为Ｓｂ（Ⅴ），过量的氧化剂用盐酸羟胺还原，生成的［ＳｂＣｌ＿６］￣－与甲基绿形成离子缔合物，在２ｍｏｌ／ＬＨＣｌ溶液中被ＣＨＣｌ＿３萃取。Ｔｌ、Ｉｎ、Ｇａ、Ａｕ等２０种离子共存时不干扰测定，用于金属镉及废水中测定微量锑，结果满意。     

The HPLC Enantioresolution of Phenyl Isothiocyanated Amino Acids on Vancomycin Bonded Phase Using the Acetonitrile‐Based Mobile Phase: A Comparison to the Teicoplanin Phase

The phenyl isothiocyanate, an electrophilic reagent for peptide chain sequencing, is used to pre‐column derivatize a variety of α‐amino acids in alkaline medium before their enantioresolution on a vancomycin bonded chiral phase using the acetonitrile‐based mobile phase. The observed resolution is believed to be due to the re‐location of the hydrogen receptor site from sulfur to nitrogen on the isothiocyanyl fragment of derivatizing reagent, which in turn changes the enantioselectivity. Under the same chromatographic conditions, the resolution for N‐benzoylated, 3,5‐dinitrobenzoylated and N‐carbobenzyloxylated amino acids is either not found or unsatisfactory. Also, no resolution is obtained in the reversed‐ or normal phase mode for all phenyl isothiocyanated amino acids examined in this study.     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).