Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Theoretical studies on the reaction path and dynamics of the reaction CH_3+H_2O→CH_4+OH

The reaction path, the dynamical properties along the reaction path and CVT rate constants are computed by the ab initio MO method, the reaction path Hamiltonian theory and the variational transition state theory. The results show that the effect of the electron correlation energy on activation barrier is large, the recrossing and tunneling effects exist in the reaction.     

Sulfonated polypropylene ionomers

Polypropylene ionomers have been prepared by sulfonation of copolymers of propene and 7 methyl, 1-6 octadiene, followed by neutralization to cesium salts. Both WAXS and SAXS were used to study the morphology of the samples, while their thermal properties were studied by DSC and their mechanical properties by DMTA. The sulfonation process is shown to cause a further drop in crystallinity in addition to the effect of comonomer incorporation. Ion clustering is observed when the extent of sulfonation is high enough, the limit being dependent on the copolymer composition. The ion pairs which are not incorporated into the cluster cause a small-angle upturn in the WAXS pattern. The mechanical properties are strongly affected by the drop in crystallinity, but may be partly recovered due to ion clustering. No disruption of the ion clusters is observed before thermal decomposition of the polymer.     

The HPLC Enantioresolution of Phenyl Isothiocyanated Amino Acids on Vancomycin Bonded Phase Using the Acetonitrile‐Based Mobile Phase: A Comparison to the Teicoplanin Phase

The phenyl isothiocyanate, an electrophilic reagent for peptide chain sequencing, is used to pre‐column derivatize a variety of α‐amino acids in alkaline medium before their enantioresolution on a vancomycin bonded chiral phase using the acetonitrile‐based mobile phase. The observed resolution is believed to be due to the re‐location of the hydrogen receptor site from sulfur to nitrogen on the isothiocyanyl fragment of derivatizing reagent, which in turn changes the enantioselectivity. Under the same chromatographic conditions, the resolution for N‐benzoylated, 3,5‐dinitrobenzoylated and N‐carbobenzyloxylated amino acids is either not found or unsatisfactory. Also, no resolution is obtained in the reversed‐ or normal phase mode for all phenyl isothiocyanated amino acids examined in this study.     

High-Performance Liquid Chromatographic Analysis of Amino Acids in Edible Seaweeds after Derivatization with Phenyl Isothiocyanate

Summary A reversed-phase high-performance liquid-chromatographic method has been used for analysis of the amino acids in edible seaweed. Sample proteins were hydrolysed with hydrochloric acid and the amino acids produced were derivatized with phenyl isothiocyanate. The resulting phenylthiocarbamyl amino acids were chromatographed on an ODS2 column with UV detection at 254 nm. The mobile phase was a mixture of 0.14 M ammonium acetate buffer, pH 6.4, containing 0.05% triethylamine (A) and 60:40 (v/v) acetonitrile–water (B), at a flow rate of 1.1 mL min^–1; the elution gradient (min:A%) was: 0:90, 8:90, 10:70, 12:70, 18:52, 20:0, 25:0, 28:90, 35:90. Method precision for the different amino acids was between 1.33 and 3.88% (relative standard deviation); detection limits were between 6.9 and 14.3 ng mL^–1. The amino acid content of the algae analysed ranged from 22.4 ± 1.9 to 138.0 ± 5.6 mg g^–1 d.w. The amino acids present at highest concentrations were glutamic acid, alanine, and phenylalanine.     

Extraction and coordination studies of carbamoyl methyl sulfoxide (CMSO) with uranyl bis(β-diketonates). Synthesis and molecular structure of [{UO2(DBM)2}2C6H5CH2SOCH2CONHC6H5]

The carbamoyl methyl sulfoxide compounds of uranyl bis(β-diketonate) of the types [UO₂(DBM)₂CMSO] and [{UO₂(DBM)₂}₂CMSO] (where HDBM = C₆H₅COCH₂COC₆H₅; CMSO = C₆H₅CH₂SOCH₂CONHC₆H₅ or C₆H₅SOCH₂CONⁱPr₂) have been synthesized and characterized by IR and NMR spectroscopic techniques and elemental analysis. Spectral studies show that CMSO acts as a monodentate ligand in [UO₂(DBM)₂CMSO] compounds and bonds through the sulfoxo oxygen atom to the uranyl group. It acts as a bridging bidentate ligand in [{UO₂(DBM)₂}₂CMSO] compounds and bonds through both the sulfoxo and carbamoyl oxygen atoms to two different uranyl groups. The structure of the compound [{UO₂(DBM)₂}₂C₆H₅CH₂SOCH₂CONHC₆H₅] confirms the bridging bidentate mode of coordination for the CMSO ligand. Extraction studies show an enhancement in solvent extraction for the uranyl ion from nitric acid medium when a mixture of thenoyl trifluoroacetone (HTTA) and CMSO was employed.     

New insight into the oxidative chemistry of noradrenaline: competitive o-quinone cyclisation and chain fission routes leading to an unusual 4-[bis-(1H-5,6-dihydroxyindol-2-yl)methyl]-1,2-dihydroxybenzene derivative

Oxidation of 5×10⁻³ M noradrenaline in aqueous phosphate buffer, pH 7.4, with K₃Fe(CN)₆, NaIO₄ or Fe²⁺/EDTA/H₂O₂ followed by extraction with ethyl acetate and acetylation with Ac₂O/Pyr led to a main reaction product which was isolated and identified as 4-[bis-(1H-5,6-diacetoxyindol-2-yl)methyl]-1,2-diacetoxybenzene, an unprecedented [bis-(indol-2-yl)methyl]-benzene derivative unsubstituted on the 3-position of the indole rings. This product was also obtained in 40% yield by reaction of 5,6-dihydroxyindole with 3,4-dihydroxybenzaldehyde. Other components of the oxidation mixture were 1-acetyl-3,5,6-triacetoxyindole, derived from noradrenolutin, and 5,6-diacetoxyindole, originating from cyclisation/dehydration of the o-quinone of noradrenaline, along with some 3,4-diacetoxybenzaldehyde. Inspection of the aqueous phase revealed the presence of 3,4-dihydroxymandelic acid and 3,4-dihydroxybenzaldehyde, derived from oxidative breakdown of the 2-amino-1-hydroxyethyl chain via a p-quinomethane intermediate. These results disclose new aspects of the oxidative chemistry of noradrenaline beyond the aminochrome stage and provide a route to novel [bis-(indol-2-yl)methyl]-benzene derivatives of potential pharmacological interest.     

Preparation and Characterization of Methyl Jasmonate Microcapsules and Their Preserving Effects on Postharvest Potato Tuber

Potato tubers tend to sprout during long-term storage, resulting in quality deterioration and shortened shelf life. Restrictions on the use of chlorpropham, the major potato sprout suppressant, have led to a need to seek alternative methods. In this study, the effects of methyl jasmonate (MeJA) solutions and MeJA microcapsules on sprouting and other key quality attributes of the potato tuber were investigated. The results showed that the MeJA solution was most effective at 300 μmol L⁻¹ according to TOPSIS analysis. To prepare MeJA microcapsules, the optimal formulation is with 0.04% emulsifier, 2.5% sodium alginate, 0.5% chitosan and 3% CaCl₂. Compared to 300 μmol L⁻¹ MeJA solution, MeJA microcapsules consumed a lower dose of MeJA but demonstrated a better retaining effect on the overall quality attributes of potato tubers. MeJA microcapsules are promising agents for the preservation of postharvest potato tubers.     

Facile one‐pot method of initiator fixation for surface‐initiated atom transfer radical polymerization on carbon hard spheres

An efficient and novel one‐pot process is developed to immobilize the atom transfer radical polymerization (ATRP) initiators onto the surface of fully pyrolyzed carbon hard spheres (CHSs) via a radical trapping process from the in situ thermal decomposition of bis(bromomethylbenzoyl)peroxide. The CHSs do not require any additional preparative treatment prior to the initiator immobilization. Styrene and methyl methacrylate are polymerized onto initiator‐immobilized CHSs by surface‐initiated atomic transfer radical polymerization (SI‐ATRP). Samples are characterized using Fourier transform infrared, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. These methods of characterization confirmed that all the CHSs are coated with a uniform layer of grafted polymer. This efficient, one‐pot immobilization of ATRP‐initiators represents an exceptionally simple route for the rapid preparation of various polymer‐coated carbon‐based nanomaterials using SI‐ATRP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3314–3322