Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Dehydrogenation of methanol on low Cu and Re—Cu catalysts supported on sibunite

The activity and selectivity of mono- and bimetallic catalysts containing copper and rhenium on sibunite were studied in the decomposition of methanol to methyl formate (MF), water, H₂, CO, and CO₂at 200—400 °C. Methane is also formed on rhenium-containing catalysts at 300—400 °C. The dehydrogenating activity and selectivity to form MF are higher on the copper-sibunite catalysts than on the rhenium-sibunite samples. The introduction of 0.25% Re into the 4% copper-containing catalyst enhances its total activity and stability.     

Association of poly-N-[tris(hydroxymethyl)methyl] acrylamide with a water soluble β-cyclodextrin polymer

An acrylic polymer with pendent adamantyl groups was synthesized and its properties in an aqueous solution with a β-cyclodextrin (βCD) epichlorhydrin polymer examined. Viscosity properties of precursor and modified polymers show differences at low concentrations, but not at higher concentration probably due to very important hydrogen bonds which prevent the formation of intermolecular hydrophobic bonds. The association of both complementary polymers through the inclusion of adamantyl groups is evidenced by phases separation occurrence. Phase diagrams were established at two different concentrations of polymers. We have shown a maximal association of both polymers at these two concentrations, for the same ratio βCD moles/adamantyl groups: 2.4. Salt addition favors this association and displaces the two phases zone to smaller concentrations of modified polymer. Further, 4-nitrophenol can be extracted by the concentrated phase resulting from mixture of solutions of guest and host polymers, pointing out the availability of the associated phase to trap organic molecules.     

Carboxylic Acids from <Emphasis Type="Italic">Phyllanthus urinaria</Emphasis>

Five compounds, terephthalic acid mono-[2-(4-carboxy-phenoxycarbonyl)-vinyl] ester (1), (E)-3-(5′-hydroperoxy-2,2′-dihydroxy[1,1′-biphenyl]-4-yl)-2-propenoic acid (2), 3,4,5-trihydroxybenzoic acid (3), succinic acid (or butanedioic acid) (4), and 2,3,4,5,6-pentahydroxybenzoic acid (5), were isolated from Phyllanthus urinaria. The structures of these compounds were elucidated by means of spectral techniques including IR, MS, and 1D/2D NMR. 1 and 2 are new compounds.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 14–17, January–February, 2005.     

糠酸一步催化法制备四氢糠酸甲酯

以糠酸、甲醇、氢气为原料,采用连续流动固定床微反应器,Pd-Ni/γ-Al2O3为催化剂,使糠酸一步加氢甲酯化生成α-四氢糠酸甲酯.研究了反应的温度,压力,气、液体流速,进料流量等因素对催化反应的影响.结果表明:在1.5MPa,250℃,氢气空速3300 h-1,液体空速3.0 h-1(氢油比为50)时,糠酸转化率为96.6%,四氢糠酸甲酯的选择性97.2.0%,产率94.0%.催化剂稳定性较好,连续运转280小时后未见活性下降.该反应体系活性高,选择性好,反应压力低,催化剂性能稳定,操作简单,产物易分离.     

西印度蔗螟聚集信息素次要组份合成方法的改进

2-甲基-4-庚醇和2-甲基-4-辛醇是西印度蔗螟(Metamasiushemipterus)聚集信息素的次要组份，本文以天然产物(S)-亮氨酸为原料合成出了2-甲基-4-庚醇及2-甲基-4-辛醇的所有对映异构体，其关键步骤是由(2S)-4-甲基-1,2-戊二醇合成出(2S)和(2R)-4-甲基-1,2-环氧戊烷两种重要中间体，目标产物光学纯度可达95%以上。     

树枝状十二酯的合成

以乙二胺和丙烯酸十二酯为原料，甲醇为溶剂，采用迈克尔加成反应合成了低代的树枝状十二酯。探讨了反应条件对树枝状十二酯收率的影响。乙二胺2mL(30mmol)，n(乙二胺)：n(丙烯酸十二酯)=1：6，甲醇占反应液总体积的50％，反应温度40℃，反应时间48h，产率54．9％。     

2-氰基-2,3,3-三甲基-5-硫代-吡咯烷的合成新法

以3,3-二甲基-4-戊烯酸甲酯为原料, 经过6步反应合成了目标产物2-氰基-2,3,3-三甲基-5-硫酮-吡咯烷, 反应的总收率约为37%, 其中关键步骤为分子内环化和碘化氢消除反应. 通过元素分析, ¹H NMR, IR和MS对所合成化合物的结构进行了表征.     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.     

蔗糖酯示波极谱分析法的研究

蔗糖酯分子在碱性条件下，加热水解为蔗糖和硬酯酸，在ｐＨ＞１０的ＮＨ＿３·Ｎ＿２Ｏ－（ＮＨ＿３）＿３Ｃ＿６Ｈ＿５Ｏ＿７体系中，于示波极谱仪上，峰电位─０．９１Ｖ处出现一灵敏度高和稳定性好的极谱图，其浓度从０．０２～０．２８ｍｇ／ｍＬ与峰电流呈线性关系，最低检出限为０．００４ｍｇ／ｍＬ，相对标准偏差为１．３％。