SYNTHESIS OF DBN AND ITS CATALYTIC PERFORMANCE FOR METHANOL CARBONYLATION TO METHYL FORMATE

1 , 5-diazabicyclo['1, 3, 0]non-5-ene(DBN) has been synthesized in our laboratory, and its catalytic activity and selectivity for methanol carbonylation to methyl formate (MF) have been studied. The experimental results have demonstrated that the synthetic processes of DBN used for the present work are reasonable and feasible. The total yield of three steps of DBN synthsis is approximate to 80%. The activity evaluation has shown that DBN can effectively catalyze the carbonylation reaction of methanol in the presence of propylene oxide (PO) promoter. PO-promoted DBN is a novel catalytic system superior to sodium methoxide.     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Synthesis and Crystal Structure of an Azide Bridged Binuclear Zinc(Ⅱ) Dimer Containing Taurine Schiff Base [Zn_2(C_8H_9N_2O_3S)_2·(N_3)_2·(H_2O)_2]_2·_2H_2O

1 INTRODUCTION The investigation of Shiff base complexes con- taining sulfur and complexes of amino acid Schiff bases[1, 2] has recently aroused considerable interest due to their antiviral, anticancer and antibacterial activities. Taurine, known as 2-aminosulfonic acid, is indispensable to human beings and plays an im- portant role in physiological functions. In this con- tribution, we present the synthesis and crystal struc- ture of a new binuclear Zn(II) dimmer with a tri- dentate Sc…     

Oxidative Methyl Esterification of Primary Alcohols with Iodine‐Mediated Poly[4‐(Diacetoxyiodo)Styrene]

An operationally simple oxidative methyl esterification of primary alcohols in good yields using an iodine‐mediated poly[4‐(diacetoxyiodo)styrene] in methanol at room temperature is described. The polymeric reagent can be regenerated and reused as an environmentally benign reagent.     

Studies of the Reaction Behavior of Nitryl Compounds Towards Azides: Evidence for Tetranitrogen Dioxide,N4O2

The reaction behavior of NaN₃, AgN₃, and Me₃SiN₃ towards FNO₂, CINO₂, NO₂SbF₆, and NO₂BF₄ was investigated. At -30°C or below in a solvent-free system sodium azide did not react with CINO₂, NO₂BF₄, or NO₂SbF₆. Below -30°C silver azide did not react either with neat C1NO₂. Treatment of Me₃SiN₃ with pure C1NO₂ led to the formation of C1N₃, N₂O, and Me₃SiOSiMe₃. A mechanism for this reaction has been proposed. Pure chlorine azide was isolated by fractional condensation and identified by its low-temperature Raman spectrum (liquid state). The reaction of Cp₂Ti(N₃)₂ with C1NO₂ also yielded C1N₃ as the only azide-containing reaction product. Treatment of FNO₂ with NaN₃ at temperatures as low as -78°C always ended in an explosion which was probably due to the formation of FN₃ as one of the reaction products. The reaction of NO₂SbF₆ with NaN₃ in liquid CO₂ (-55°C· T· -35°C) as the solvent afforded a new azide species which was stable at low temperature in solution only and was investigated by means of low-temperature Raman spectroscopy. The obtained vibrational data give strong evidence for the presence of tetranitrogen dioxide, N₄O₂, which can be regarded as nitryl azide (NO₂N₃). The structure and vibrational frequencies of N₄O₂ were computed ab initio at correlated level (MP2/6-31 + G^*). In liquid xenon (-100°C· T· -60°C) NaN₃ did not react with NO₂SbF₆. A previous literature report on the preparation of N₄O₂ could not be established.     

Ion/molecule reactions in a miniature RIT mass spectrometer

Ion/molecule reactions were explored in a newly developed miniature mass spectrometer fitted with a rectilinear ion trap (RIT) mass analyzer. The tandem mass spectrometry performance of this instrument is demonstrated using collision induced dissociation (CID) and ion/molecule reactions. The latter includes Eberlin transacetalization reactions and electrophilic additions. Selective detection of the chemical warfare simulant dimethyl methyl phosphonate (DMMP) was achieved through selective Eberlin reactions of its characteristic phosphonium fragment ion CH3OP(+)(O)CH3 (m/z 93), with 1,4-dioxane or 1,3-dioxolane. Efficient adduct formation as a result of electrophilic attack by the phosphonium ion on various nucleophilic reagents, including 1,1,3,3-tetramethyl urea, methanesulfonic acid methyl ester, dimethyl sulfoxide and methyl salicylate, was also observed using the RIT device. The product ions of these reactions were analyzed using CID and the characteristic fragmentation patterns of the ionic addition products were recorded using multiple-stage experiments in the miniature RIT instrument. This study clearly demonstrates that a small, home-built, miniature RIT mass spectrometer can be used to perform analytically useful ion/molecule reactions and also that instruments like this have the potential to provide a portable platform for in situ detection of organophosphorus esters and related compounds with high specificity using tandem mass spectrometry.     

The disorderly exfoliated LDHs/PMMA nanocomposites synthesized by in situ bulk polymerization: The effects of LDH-U on thermal and mechanical properties

The disorderly exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposites were obtained in a two-stage process by the in situ bulk polymerization of methyl methacrylate (MMA) in the presence of 10-undecenoate intercalated LDH (LDH-U). The dispersed behavior of the LDH-U in the PMMA matrix was identified by using X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV/visible transmission spectroscopy. All these nanocomposites showed significantly enhancement of glass transition temperature (T_g) and the decomposition temperatures compared to pristine PMMA, as identified in differential scanning calorimetry (DSC) and thermogravimetric (TGA) analysis. The tensile modulus of these nanocomposites was also enhanced by incorporating the LDH-U into the PMMA matrix and increased as the amount of LDH-U increased. According to the analytical method of Ozawa-Flynn, the degradation activation energies of these nanocomposites are higher than that of pristine PMMA.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

Advances in Organophosphorus Chemistry Based on Dichloro(methyl)phosphane

Besides phosphorus trichloride and phosphane, dichloro(methyl)phosphane is gaining importance as a starting material for the synthesis of organophosphorus compounds. It provides ready access to phosphonic, phosphinic and phosphonous acid derivatives, as well as their secondary products. The synthetic and application potential of organophosphorus compounds—based on industrially produced dichloro(methyl)phosphane—is illustrated by means of numerous examples.     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996