萃取分光光度法测定废烟末中的尼古丁

本文在ｐＨ４．５的乙酸－乙酸钠缓冲溶液中，使烟碱与甲基橙生成稳定的黄色络合物，然后用二氯甲烷萃取。于λｍａｘ＝４３５ｎｍ处测定有机相的吸光度，烟碱浓度在０－６５μｇ／５ｍＬ范围内符合比尔定律，摩尔吸光系数为９．８％１０＾３Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１。方法快速，简便，应用于烟草中烟碱的定量分析，其加标回收率在８１－１０９％之间，相对标准偏差小于４．１％。     

SYNTHESIS OF DBN AND ITS CATALYTIC PERFORMANCE FOR METHANOL CARBONYLATION TO METHYL FORMATE

1 , 5-diazabicyclo['1, 3, 0]non-5-ene(DBN) has been synthesized in our laboratory, and its catalytic activity and selectivity for methanol carbonylation to methyl formate (MF) have been studied. The experimental results have demonstrated that the synthetic processes of DBN used for the present work are reasonable and feasible. The total yield of three steps of DBN synthsis is approximate to 80%. The activity evaluation has shown that DBN can effectively catalyze the carbonylation reaction of methanol in the presence of propylene oxide (PO) promoter. PO-promoted DBN is a novel catalytic system superior to sodium methoxide.     

Synthesis of 1-oxa-2-silacyclopentane derivatives via intramolecular nucleophilic attack at silicon

Metalation of (HSiMe₂)₃CH with lithium diisopropylamide (LDA) in THF gives (HSiMe₂)₃CLi, which reacts with ethylene oxide, propylene oxide, 1,2-epoxy butane, 1,2-epoxy pentane, 1,2-epoxy hexane, and epichlorohydrin to give the corresponding 1-oxa-2-silacyclopentane derivatives. Then, glycidylmethacrylate (GM) random copolymers with styrene (St) (in a 1:1 and 1:3 mol ratio) were synthesized by solution free radical polymerization at 70(±1) °C using α,α′-azobis(isobutyronitrile) (AIBN) as an initiator. Both types of copolymers were treated with (HSiMe₂)₃CLi to give new modified copolymers. The reaction of (HSiMe₂)₃CLi with epoxides on the side chains of the copolymers does not lead to intramolecular nucleophilic attack contrary to simple epoxides. All the products have been characterized by spectroscopic techniques.     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

Chemical Constituents from the Root of Antidesma Pentandrum var. Barbatum

Investigation of the root extract of Antidesma pentandrum var. barbatum led to the isolation of seven new compounds, antidesmol ( 1 ), antidesmanins E ( 2 ) and F ( 3 ), antidesnone ( 4 ), antidesnol ( 5 ), barbatumols A ( 6 ) and B ( 7 ), together with 14 known compounds including sodium aristolochate‐I ( 10 ) and aristolochic acid‐I methyl ester ( 11 ).     

Oxidation of methyl phenyl sulfide with hydrogen peroxide catalyzed by Ti(IV)-substituted heteropolytungstate

Alkylammonium salts of Ti(IV)-substituted heteropolytungstate, PW₁₁TiO ₁₀ ⁵⁻ , catalyze the oxidation of methyl phenyl sulfide with hydrogen peroxide. The yield of the corresponding sulfoxide and sulfone is practically quantitative. A³¹P NMR study confirms the formation and reactivity of the PW₁₁O₃₉TiO ₂ ⁵⁻ peroxo complex in organic media.     

Fluoride-induced nucleophilic (phenylthio)difluoromethylation of carbonyl compounds with [difluoro(phenylthio)methyl]trimethylsilane (TMS-CF2SPh)

A fluoride-induced nucleophilic (phenylthio)difluoromethylation method using TMS-CF₂SPh has been achieved. This new methodology efficiently transfers “PhSCF₂” group into both enolizable and non-enolizable aldehydes and ketones to give corresponding (phenylthio)difluoromethylated alcohols in good to excellent yields. Diphenyldisulfide can also be (phenylthio)difluoromethylated into PhSCF₂SPh in high yield. The reaction with methyl benzoate, however, gives only low yield of (phenylthio)difluoromethyl phenyl ketone. The above-obtained PhSCF₂-containing alcohols can be further transformed into difluoromethyl alcohols using an oxidation-desulfonylation procedure. This new type of nucleophilic (phenylthio)difluoromethylation methodology may have other potential applications in the medicinal and agrochemical fields.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.     

Performance validation of step-isothermal calorimeters

Isothermal calorimetry is becoming indispensable as a tool for the study of a wide variety of systems. As with all scientific instruments it is essential that robust calibration routines be developed in order to validate the data obtained. Chemical test reactions offer many advantages over (the traditionally used) joule effect heating methods, not least because they have the potential to validate instrument performance (i.e. they can be used to assess all aspects of calorimeter operation). In this work the results of a validation exercise, conducted by Thermal Hazard Technology as part of an installation routine, using the base catalysed hydrolysis of methyl paraben are discussed. In the case described, a systematic misreporting of the reported temperature of a calorimeter was identified, caused by an upgrade to the calorimeter's firmware, a discrepancy which may not have been noted using traditional electrical calibration methods and one which highlights the importance of both manufacturers and end-users adopting chemical test reactions into their test and validation routines.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.