NiFe双金属催化剂用于月桂酸甲酯加氢的研究

负载型Ni Fe/γ-Al_2O_3双金属催化剂的物理化学性质明显受还原温度的影响,进而影响月桂酸甲酯的加氢活性和产物选择性。金属Ni活性中心主要促进脱羰/脱羧(DOC)反应,Fe的加入能促进月桂酸甲酯发生加氢脱氧反应,促进C_(12)烷烃化合物生成。H_2-TPR、XRD、H_2-TPD和BET结果表明,高的还原温度有利于金属或合金活性中心形成,NiFe双金属催化剂的加氢活性取决于金属Ni、Fe和NiFe合金的含量;NiFe双金属催化剂吸附与活化H_2分子的能力明显受还原温度的影响。在研究的温度范围内,Ni活性中心具有优异的加氢和裂解性能,Fe物种的引入能有效抑制裂解性能。双金属催化剂的加氢活性顺序:NF420NF360NF450NF300,在420℃下经H_2还原制得的NF420催化剂具有最佳的月桂酸甲酯加氢性能,在反应温度为380℃时,月桂酸甲酯加氢转化率和烷烃化合物选择性分别高达93.3%和90.0%。     

Reactions of fullerene C60 with methyl methacrylate radicals: A density functional theory study

We have investigated the stepwise addition of four growing methyl methacrylate (MMA) radicals to C₆₀ fullerene, taking into account all possible types of the formed adducts. This reaction set is a reliable approximation for understanding the MMA polymerization process in the presence of C₆₀ fullerene. We have analyzed the structures of the fullerene-MMA adducts and energy parameters of their formation (heat effects and activation enthalpies). We found that up to three MMA growing radicals are favorably attached to C₆₀ as the fullerene-MMA trisadduct is a stable radical of the allyl type. It is inactive for further radical addition, and the elimination of the hydrogen atom from the growing MMA radical becomes preferable. The effects of steric factors and structures of the products of multiple growing MMA radical additions to C₆₀ on the radical polymerization of MMA in the presence of C₆₀ fullerene are considered.     

Steric effects upon transition states of radical addition polymerizations

Transition states (TSs) of radical addition homopolymerization reactions of methyl acrylate, methyl methacrylate, dimethyl itaconate, and N-methyl itaconimide were examined with two-unit radical models using MOPAC (PM3 UHF) semiempirical method. Calculated activation energies (E_as) show good correlations with experimental values. Calculated activation entropies (−ΔS^‡s) are found to be well proportional to E_as. The entropy terms play an important role as well as E_a in radical additions. E_a depends on the angle (θ_rs) between reaction points of radical and of monomer at TS. The bond length between reaction points at TS is constant regardless of monomers studied. The geometries and thermodynamical properties calculated here for TS indicate the importance of steric effects caused by substituted group(s) rather than electronic perturbation energies reported previously. © 1996 John Wiley & Sons, Inc.     

Syntheses and radical polymerizations of novel optically active vinyl and isopropenyl carbamates having L-leucine structures

Syntheses and radical polymerizations of vinyl and isopropenyl carbamates having L -leucine methyl ester structures, N-vinyloxycarbonyl-L -leucine methyl ester (VOC-L-M) and N-isopropenyloxycarbonyl-L -leucine methyl ester (IOC-L-M), were carried out. VOC-L-M and IOC-L-M were prepared by the reactions of L -leucine methyl ester with vinyl and isopropenyl chloroformates in the presence of sodium hydrogen carbonate. The radical polymerization of VOC-L-M with AIBN (1 mol %) in bulk, chlorobenzene, methanol, and N,N-dimethylformamide afforded the corresponding polymer (poly(VOC-L-M)) with M _n 7,400–19,000. Meanwhile, IOC-L-M afforded no polymer with AIBN at 60°C but afforded a polymer having low molecular weight with BPO at 80°C. The glass transition temperatures of poly(VOC-L-M) and poly(IOC-L-M) were 53 and 65°C, respectively. The 10% weight loss temperatures of poly(VOC-L-M) and poly(IOC-L-M) under nitrogen were 255 and 173, respectively. The copolymerization parameters of VOC-L-M (M₁) and vinyl acetate (M₂) were evaluated as r₁ = 0.92 and r₂ = 0.63. © 1996 John Wiley & Sons, Inc.     

Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

三维大孔TiO2光催化剂的制备及其催化性能

 以聚甲基丙烯酸甲酯微球为模板,以钛酸正丁酯为原料,采用溶胶-凝胶法制备了具有三维结构的大孔TiO2. 采用差示扫描量热、热重-微分热重、X射线衍射、红外光谱、扫描电子显微镜和氮气吸附等手段对样品进行了表征. 结果表明,高温热处理后得到的三维大孔TiO2光催化剂的孔径为200 nm左右,孔径分布均匀, TiO2纳米晶粒中锐钛矿相和金红石相的含量分别为82%和18%. 光催化氧化实验表明,此种三维结构的TiO2对甲基橙溶液具有较好的光催化氧化性能.     

光催化-膜分离集成反应器及其应用

 设计了一种新型光催化-陶瓷膜分离集成反应器,在反冲条件下利用此集成反应器进行了甲基橙光催化氧化反应,分别考察了陶瓷膜对光催化剂TiO2微粉的截留率、膜的渗透通量、光催化氧化脱色率以及不同膜分离压力下的光催化反应速率常数. 结果表明,TiO2-甲基橙悬浆液体系中TiO2微粉的截留率可达到99.9%, 经集成反应器完成一个反应周期后甲基橙氧化脱色率达到10%, 光催化氧化脱色效果高于圆柱式反应器.     

Synthesis of Lanthanide–Alkylaluminium Bimetallic Complexes and Studies on Their Catalytic Activities for Polymerization of Some Polar Monomers

Three new lanthanide (Ln)–alkylaluminium (Al) bimetallic complexes with the formula [(μ-CF₃CO₂)₂Ln(μ-CF₃CHO₂)AlR₂ · 2THF]₂ (Ln=Nd, Y, R=i-C₄H₉ (i-Bu); Ln=Eu, R=C₂H₅(Et); THF=tetrahydrofuran) were synthesized by the reaction of Ln(CF₃CO₂)₃ (Ln=Nd, Y) with HAl (i-Bu)₂ and of Eu(CF₃CO₂)₃ with AlEt₃, respectively. Their crystal structures were determined by X-ray diffraction at 233 K. [(μ-CF₃CO₂)₂Nd (μ-CF₃CHO₂)Al(i-Bu)₂ · 2THF]₂ (Nd–Al) and [(μ-CF₃CO₂)₂Y(μ-CF₃CHO₂)Al(i- Bu)₂ · 2THF]₂ (Y–Al) are isomorphous and crystallize in space group P 1 with a =12.441(3) Å [12.347(5) Å for Y–Al], b =12.832(3) Å [12.832(4) Å], c =11.334(3) Å [11.292(8) Å], α=104.93 (2)° [104.45(4)°], β=98.47(2)° [98.81(4)°], γ=64.60(2)° [64.30(3)°], R =0.519 [0.113], R _w=0.0532 [0.110], Z =1 and [(μ-CF₃CO₂)₂Eu(CF₃ CHO₂)AlEt₂ · 2THF]₂(Eu–Al) in space group P 2₁/ n with a =11.913(6) Å, b =14.051(9) Å, c =17.920(9) Å, α=101.88(11)°, β=γ=90°, R =0.0509, R _w=0.0471 and Z =2. The six CF₃CO     

高相对分子质量8-羟基喹啉锂聚合物的制备和性能

高分子电致发光显示器(PLED)是近几年来国际、国内的研究热点,取得了很大的进展,其中高分子化金属配合物是一类很有价值的功能材料。通过甲基丙烯酸甲酯(MMA)、苯乙烯(S)和含有8-羟基喹啉的单体共聚合成模板聚合物,再与氢氧化锂作用,实现了8-羟基喹啉锂配合物的高分子化,获得了一种能够溶解在普通的溶剂中的高相对分子质量的含喹啉锂配合物的发光聚合物,并利用元素分析、¹H-NMR、FTIR、UV、PL光谱、DSC、TGA、GPC等方法对其结构和性能作了表征。紫外吸收和光致发光(PL)光谱说明合成共聚物的发光来自于Liq基团,引入的可聚合的链段以及共聚物中的甲基丙烯酸甲酯或苯乙烯链段,并没有影响发光波长的改变。亲核溶剂改变8-羟基喹啉金属配合物分子结构,使共聚物光谱明显红移20nm左右。