Response surface methodology for optimization of heavy metal removal by magnetic biosorbent made from anaerobic sludge

In this study, optimum conditions for adsorption of heavy metals such as Cu²⁺, Cd²⁺ and Pb²⁺ onto a low-cost, magnetically modified-alkali conditioned anaerobically digested sludge (MADS) adsorbent were obtained. Response Surface Methodology (RSM) incorporating Central Composite Design (CCD) of experiments was applied to optimize four independent process variables. Statistical analysis was executed by ANOVA and the quadratic model developed had regression coefficients of 0.959, 0.957 and 0.95 for Cu²⁺, Cd²⁺ and Pb²⁺, respectively. The independent variables such as pH, time and initial concentration positively influenced adsorption capacity, q_e, whereas the value of q_e decreased with an increase in MADS dosage. Model validation experiments for optimization of adsorption process showed comparable results with predicted values. The adsorption capacity of MADS adsorbent at optimum conditions found through RSM analysis was 29.721 mg L^?1, 28.551 mg L^?1 and 28.601 mg L^?1 for Cu²⁺, Cd²⁺ and Pb²⁺ respectively.     

Ru(II)-Catalyzed Hydroarylation of in situ Generated 3,3,3-Trifluoro-1-propyne by C−H Bond Activation: A Facile and Practical Access to β-Trifluoromethylstyrenes

In this study, a practical and straightforward synthesis of β-(E)-trifluoromethylstyrenes by ruthenium-catalyzed C−H bond activation was developed. The readily available and inexpensive 2-bromo-3,3,3-trifluoropropene (BTP), a non-ozone depleting reagent, was used as a reservoir of 3,3,3-trifluoropropyne. With this approach, the monofunctionalization of a panel of heteroarenes was possible in a safe and scalable manner (23 examples, up to 87 % yield). Mechanistic investigations and density functional theory (DFT) calculations were also conducted to get a better understanding of the mechanism of this transformation. These studies suggested that 1) a cyclometallated ruthenium complex enabled the transformation, 2) this complex exhibited high efficiency in this transformation compared to the commercially available [RuCl₂(p-cymene)]₂ and 3) the mechanism proceeded through a bis-cyclometallated ruthenium intermediate for the carboruthenation step.     

Solvent-free 1,6-conjugate arylation of para-quinone methides: A greener approach to unsymmetrical triarylmethanes

A highly efficient arylation of para-quinone methides (p-QMs) with N,N-dimethylaniline under solvent free condition has been developed, which proceeded via a para-toluenesulfonic acid (TsOH)-promoted 1,6-conjugated addition pathway. This methodology provided a green and sustainable methodology to construct various novel unsymmetrical triarylmethanes (TAMs) with the advantages of good functional group tolerance, scalability, and regioselectivity.     

Comparative Studies of Selected Criteria Enabling Optimization of the Extraction of Polar Biologically Active Compounds from Alfalfa with Supercritical Carbon Dioxide

The aim of this research was to provide crucial and useful data about the selection of the optimization criteria of supercritical carbon dioxide extraction of alfalfa at a quarter-technical plant. The correlation between more general output, including total phenolics and flavonoids content, and a more specified composition of polar constituents was extensively studied. In all alfalfa extracts, polar bioactive constituents were analyzed by both spectrometric (general output) and chromatographic (detailed output) analyses. Eight specific phenolic acids and nine flavonoids were determined. The most dominant were salicylic acid (221.41 µg g⁻¹), ferulic acid (119.73 µg g⁻¹), quercetin (2.23 µg g⁻¹), and apigenin (2.60 µg g⁻¹). For all seventeen analyzed compounds, response surface methodology and analysis of variance were used to provide the optimal conditions of supercritical fluid extraction for each individual constituent. The obtained data have shown that eight of those compounds have a similar range of optimal process parameters, being significantly analogous for optimization based on total flavonoid content.     

响应面法优化Co2+掺杂TiO2制备工艺研究

利用共沉淀-水热法制备了钴掺杂二氧化钛光催化剂,以催化降解水中草甘膦效率为指标,采用响应面法对钴掺杂二氧化钛光催化剂的制备条件进行优化。结果表明,钴掺杂二氧化钛光催化剂的最佳制备工艺为:水热反应温度139.64℃、水热反应时间23.75h、煅烧温度408.17℃和煅烧时间4.04h。利用最佳制备条件下制得的钴掺杂二氧化钛光催化剂催化降解水中草甘膦,降解效率接近80%,与纯二氧化钛相比,催化降解效率有较大幅度提升。     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

Hydrogen Bond Mediated Aglycone Delivery: Synthesis of Linear and Branched α‐Glucans

A Hydrogen bond mediated aglycone delivery (HAD) method was applied to the synthesis of α‐glucans, which are abundant in nature, but as targets represent a notable challenge to chemists. The synthesis of linear oligosaccharide sequences was accomplished in complete stereoselectivity in all glycosylations. The efficacy of HAD may diminish with the increased bulk of the glycosyl acceptor, and may be an important factor for the syntheses of oligomers beyond pentasaccharides. The synthesis of a branched structure proved more challenging, particularly with bulky trisaccharide acceptors.     

Modeling and optimizing toughness and rigidity of PA6/SBR: Using compatibilizer and response surface methodology

The improvement of miscibility between toughened Polyamide-6 (PA6) and Styrene-Butadiene Rubber (SBR) was carried out using grafted Glycidyl Methacrylate (SBR-g-GMA). At first, the compatibilizers were prepared using different comonomers, Styrene, and N-vinyl pyrrolidone. Central composited design (CCD) was distinctly applied to study the influence of Glycidyl Methacrylate (GMA) content and comonomer/GMA on the process of compatibilizer preparation. Four models were developed for Gel content and Degree of grafting for both comonomers using Design-expert software. The models were used to calculate the optimum operating conditions and according to the Flory-Huggins parameter and obtained results, SBR-co-NVP-g-GMA was chosen as an effective compatibilizer. Afterward, another CCD was employed to scrutinize the effect of various amounts and grafting degree of compatibilizer on morphology and mechanical properties of PA6/SBR. The Interparticle distance and polydispersity were studied using a Scanning electron microscope (SEM) and also the Izod impact test inspected in order to evaluate the mechanical properties. Finally, modulus and impact strength were optimized to minimize the former and maximize the latter. Also, the most practical terms in the fitted model are statistically specified using F-value. The root causes for the improvement of blend properties were attributed to a chemical reaction between epoxy groups in SBR-g-GMA and both the carboxylic and amine groups in PA6. Impact strength (539.8 J/m) and modulus (2017.2 N/mm²) of the optimum blend indicate an excellent agreement with the amounts predicted by the models.     

Optimization of ultrasound-assisted extraction of phenolic compounds from Sesamum indicum

Abstract

Effective extraction of phyto-biomolecules insures retaining maximum functionality along with higher recovery. In this study, ultrasound-solvent assisted extraction (USAE) was employed for optimal extraction of phyto-biomolecules from Sesamum indicum (sesame) leaves using the approach of Response Surface Methodology (RSM). The optimized condition of 200?W power, 59% methanol concentration with 1:14?g/mL solid–liquid ratio and 15?min of extraction time yielded 367.39?±?1.85?mg GAE/100?g of total phenolic content, 96.72?±?3.27% of free radical scavenging activity and 81.20?±?2.87% of iron chelating activity respectively. The extract consist of essential phytocomponents like gallic acid, chlorogenic acid, and quercetin with lipid peroxidation activities of >50% over incubation time of 48?h. Also, showed antimicrobial activity against various Gram’s negative and positive food borne pathogens. The results of this study implied the importance of USAE for effective and optimum recovery of phyto-biomolecules from Sesame leaves with retained functional properties.