Substituted Quinolinones. Part 19. New and Unexpected Results from Oxidation of 3-Acetyl-1-Alkyl- 4-Hydroxyquinolin-2(1H)-Ones Using Selenium Dioxide

Abstract

Oxidation of 3-acetyl-1-alkyl-4-hydroxyquinolin-2(1H)-ones using selenium dioxide under Riley conditions was described. The oxidation reaction produced a mixture of 2 unexpected α-keto acid and its dehydrated dimer derivatives. The oxidation reaction was studied under different reaction conditions in order to maximize the yields and optimize reaction conditions. Also, 1-alkyl-4-hydroxy-3-(2-nitroacetyl)quinolin-2(1H)-one and/or 3-acetyl-1-alkyl-4-diflouro-boryloxyquinolin-2(1H)-one derivatives were subjected to the same oxidation reaction giving rise improved reaction yields and selectivity in case of the boron-complex. Alkaline degradation of the dehydrated dimers led to formation of the 4-hydroxy-2-oxoquinoline-3-carboxylic acids while under the same conditions the α-keto acids underwent deoxalylation.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the following free supplemental files: Additional figures].     

Oxidation of Poly(dimethylbutadiene) Popcorn Polymer

Poly(dimethylbutadiene) popcorn polymer oxidizes readily in the presence of oxygen at room temperature. Quantitative data are presented for the production of the major volatile product, 2,5-hexanedione, as well as for the secondary products: water, acetic acid, and acetaldehyde. Three reaction mechanisms formerly proposed for polyisoprene oxidation are considered for their applicability to poly(dimethylbutadiene) popcorn oxidation. Of these, one that assumes the formation of a Bevilacquatype peroxyalkoxy radical followed by hydrogen abstraction to form an alcohol group, double bond migration, formation of a peroxide radical adjacent to the alcohol, then elimination of a hydroxy radical and scission, can explain the experimental data.     

Preparation and Tribological Behaviors of Lubricants—Oil Based on Modified Microbial Oil with Nano-Schiff Base Copper Complex

A W/O microemulsion reactor was used to prepare four kinds of modified lubricants: (i) modified lubricant 1, modified epoxidized microbial oil + rape oil in volume ratio of 1:1; (ii) modified lubricant 2, modified esterified microbial oil + rape oil in volume ratio of 1:3; (iii) modified lubricant 3, modified epoxidized rape oil; and (iv) modified lubricant 4, modified PAO. The individual modified lubricants were further modified with 0%, 0.5%, 1%, and 2% content of nano-Schiff base copper complex (nano-SBCC). A microtribometer was used to evaluate the friction coefficient between ball/flat point contacts immersed in the modified lubricants and operated in reciprocating and linear sliding mode. A comparison of the values of the friction coefficient with the lubricants further modified with nano-SBCC with those of their individual 0% nano-SBCC counterparts indicated significant decrease: (i) almost 19.18% was obtainable for the modified lubricant 1 with 2% of nano-Schiff base copper complex, (ii) almost 16.5% was obtainable for the modified lubricant 2 with 0.5% of nano-Schiff base copper complex; (iii) almost 7.42% was obtainable for the modified lubricant 3 with 1% of nano-SBCC; and (iv) almost 7.01% was obtainable for the modified lubricant 4 with 0.5% of nano-SBCC. These suggested that the addition of nano-Schiff base copper complex can efficiently decrease the friction coefficient of epoxidized or esterified microbial oil. Analyses of two-dimensional images, average profiles (across the mid-section y = 0 of the reciprocating sliding path), and three-dimensional topographies by confocal white light microscope for the worn surfaces of flats immersed in modified lubricant 1 and modified lubricant 2 suggested better wear-resistance of the modified lubricant 2 than that of the modified lubricant 1. The ability of wear resistance for the modified lubricant became better with the increasing content of nano-Schiff base copper complex from 0% to 2%. The study revealed the modification of epoxidized microbial oil + rape oil (1:1 volume ratio) and esterified microbial oil + rape oil (1:3 volume ratio) with Cu(II) chelate of bis(salicylaldehyde)ethylenediamine, reducing the magnitude of friction and wear because of their respective wear self-repairing ability. Such self-repairing ability furnishes the suitability of epoxidized microbial oil or esterified microbial oil to be effectively modified by nano-Schiff base copper complex and to substitute ordinary base oil as a mixture with rape oil.     

Photoinduced phase transition accompanied with the changes in magnetic properties

Recently, many studies have been started in search for materials which show a photoinduced phase transition (PIPT). In this work, we review two systems as typical examples of PIPT accompanied with changes in magnetic characteristics; (1) organo-metal complex [Fe(2-pic)₃]Cl₂ EtOH (2-pic = 2-amino-methyl-pyridine) and (2) III-V based magnetic semiconductors (In_1-x , Mn _x )As. In the former case, we show several nonlinear characteristics in dynamical process of photoinduced spin state transition from low-spin to high-spin states. In the latter one, photocarrier-induced ferromagnetic order has been observed by both magnetic and transport measurements.     

Thionylimido Complexes

An improved route to d-block and main group NSO complexes is presented including the synthesis of the first antimony(V) complexes, (Ar₃Sb(NSO)₂), and copper examples [CuBipy(PPh₃)NSO]. The structures of eight complexes are reported. The observed variation in M–N–S bond angles is due to the combination of orbital overlap (ligand-to-metal bonding) and the degree of ionicity of the bonding.     

Amides and Heparin‐Like Polymer Co‐Functionalized Graphene Oxide Based Core @ Polyethersulfone Based Shell Beads for Bilirubin Adsorption

Excessive bilirubin in the body of patient with liver dysfunction or metabolic obstruction may cause jaundice with irreversible brain damage, and new type of adsorbent for bilirubin is under frequent investigation. Herein, graphene oxide based core @ polyethersulfone‐based shell beads are fabricated by phase inversion method, amides and heparin‐like polymer are introduced to functionalize the core‐shell beads. The beads are successfully prepared with obvious core‐shell structure, adequate thermostability and porous shell. Clotting times and protein adsorption are investigated to inspect the hemocompatibility property of the beads. The adsorption of bilirubin is systematically investigated by evaluating the effects of contacting time, initial concentration and temperature on the adsorption, which exhibits improved bilirubin adsorption amount for the beads with amides contained cores or/and shells. It is worth believing that the amides and heparin‐like polymer co‐functionalized core‐shell beads may be utilized in the field of hemoperfusion for bilirubin adsorption.     

Promising new catalytic properties of a Co (II)-carboxamide complex and its derived Co3O4 nanoparticles for the Mizoroki-Heck and the Epoxidation reactions

The new Co(II) - carboxamide complex ( 1 ) and Co₃O₄ nanoparticles ( 2 ), by way of thermal decomposition of ( 1 ) have been efficiently synthesised in the environment-friendly. X-ray diffraction reveals a slightly distorted octahedral coordination of cobalt (four nitrogens and two oxygens) in ( 1 ) and regular octahedral or tetrahedral ones (oxygens only) in ( 2 ). The investigation of ( 1 ) and ( 2 ) in the Mizoroki-Heck and epoxidation of alkens reactions showed them both to be powerful, green and inexpensive catalysts.     

Samarium(II) Monoalkyl Complex Supported by a β-Diketiminato-Based Tetradentate Ligand: Synthesis,Structure, and Catalytic Hydrosilylation of Internal Alkynes

The synthesis and catalytic applications of trivalent rare-earth metal alkyl complexes have been well developed, but the chemistry of divalent rare-earth metal alkyl complexes lagged much behind. Herein, we report the synthesis, structure, and catalytic applications of a samarium(II) monoalkyl complex supported by a β-diketiminato-based tetradentate ligand, [LSmCH(SiMe₃)₂] (L=[MeC(NDipp)CHC(Me)NCH₂CH₂N(Me)CH₂CH₂NMe₂]⁻, Dipp=2,6-(iPr)₂C₆H₃). This complex is synthesized by the salt metathesis reaction of samarium iodide [LSm(μ-I)]₂ and KCH(SiMe₃)₂ in 63 % yield. Its structure is characterized by single-crystal X-ray diffraction, showing a distorted square-pyramid coordination geometry. This samarium(II) monoalkyl complex exhibits high catalytic activity in the hydrosilylation of aryl and methyl-substituted unsymmetrical internal alkynes with secondary hydrosilanes, selectively providing the α-(E) products in high yields.     

Infrared spectroscopy of closed s-shell gas-phase M+(N2O)n (M = Li,Al) ion-molecule complexes*

ABSTRACT

We present the results of a combined experimental and computational study of the structures of gas-phase M⁺(N₂O)_n (M?=?Li, Al) complexes. Infrared spectra were recorded in the region of the N₂O asymmetric (N?=?N) stretch using photodissociation spectroscopy employing the inert messenger technique. Unlike in our previous studies on M⁺(N₂O)_n (M?=?Cu, Ag, Au and M?=?Co, Rh, Ir) complexes, N– and O–bound isomers in this case are near isoenergetic and are not distinguished spectroscopically at this resolution. In the case of Li⁺ complexes, there is, however, evidence for the presence of bound N₂ moieties, indicating the presence of inserted, OLi⁺N₂(N₂O)_n–type structures. The weak N₂ band lies to the blue of the signature of molecularly N– and O–bound ligands and is well–reproduced in the simulated spectra of energetically low-lying structures computed from density functional theory. No such inserted isomers are observed in the case of Al⁺(N₂O)_n complexes whose infrared spectra can be understood on the basis of molecularly-bound N₂O ligands. The differences in M⁺(N₂O)_n structures observed for these closed–shell, ns², metal centres relative to other metal cations are discussed in terms of the likely bonding motifs.