贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

甲烷部分氧化制合成气 Ⅰ．甲烷在过渡金属上的活化

文中用同位素交换（Ｄ_２─ＣＨ_４）反应来测量四种过渡金属负载型催化剂对甲烷的活化能力，并与Ｓｖｅｎｓｓｏｎ等从头算的计算结果作了比较，表明最有效活化甲烷分子的Ｃ─Ｈ键的金属是铑（Ｒｈ）．文中还测定了在甲烷部分氧化制合成气反应中，四个不同催化剂的催化活性与选择性，并与它们对甲烷的活化能力进行对比，可以看出甲烷部分氧化反应中，反应活性高的催化剂有效地活化甲烷，断裂Ｃ─Ｈ键，而且氘代甲烷产物分布以形成ＣＤ_４产物为主要成份．     

A comparative study on the thermal decomposition of some transition metal carboxylates

Thermal decomposition of transition metal malonates, MCH₂C₂O₄?xH₂O and transition metal succinates, M(CH₂)₂C₂O₄?xH₂O (M=Mn, Fe, Co, Ni, Cu, Zn) has been studied employing TG, DTG, DTA, XRD, SEM, IR and Mössbauer spectroscopic techniques. After dehydration, the anhydrous metal malonates and succinates decompose directly to their respective metal oxides in the temperature ranges 310–400 and 400–525°C, respectively. The oxides obtained have been found to be nanosized. The thermal stability of succinates have been found to be higher than that of the respective malonates.     

Adsorption Equilibrium and Kinetics of Egg-White Proteins on Immobilized Metal Ion Affinity Gels for Designing Fractionation

Designing an Immobilized Metal ion Affinity (IMA) chromatographic process on large scale demands a thorough understanding to be developed regarding the adsorption behaviour of proteins on metal loaded IMA (IMA-M(II)) gels and the characteristic adsorption parameters to be evaluated. This research investigation illustrates the significance of these aspects for the proposed fractionation of chicken egg-white proteins on these gels. Consequently, a systematic investigation of the adsorption characteristics of three chicken egg-white proteins viz., ovalbumin, conalbumin and lysozyme on Cu(II) and Ni(II) loaded IMA gels, iminodiacetate (IDA) and tris(2-aminoethyl)amine (TREN), has been undertaken. These gels differ in their selectivity towards the proteins of interest under the identical sets of experimental conditions. While TREN-Ni(II) was selective only for lysozyme, IDA-Cu(II), IDA-Ni(II) and TREN-Cu(II) showed varying affinities for all the three proteins. The equilibrium and kinetic data were analysed using various theoretical models and adsorption parameters were quantified. On the basis of these investigations, various strategies have been proposed for the efficient large-scale fractionation of chicken egg-white proteins on these gels.     

Hydrothermal Synthesis and Crystal Structure of a Highly Reduced Mixed Molybdenum-vanadium Polyoxometalate with Phosphorus-centered [Ni(phen)3]2H2·[PmoⅤ4MoⅥ4VⅣ6M2M44]5-·4H2O(M=0.78MoⅤ+0.22VⅣ)

Polyoxometalates(POMs0) containing Keggin moieties exhibit a wide variety of compositions and have considerable structrral versatility as well as important magnetic, optical,and catalytic proper-ties[1-6].     

Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.     

有机金属络合物用于高分子富氧膜的研究进展

本文介绍了能够可逆吸附分子氧的有机金属络合物用于高分子富氧膜的研究进展，以及以双重吸附理论进行的膜的促进输送机理。     

MODIFICATION OF TRANSITION METAL CATIONS TO POLYMER-STABILIZED PLATINUM COLLOIDAL CLUSTERS IN ENANTIOSELECTIVE HYDROGENATION OF METHYL PYRUVATE

Modification of transition metal cations to polymer-stabilized Pt colloidal clusters modified with cinchonidine was studied in enantioselective hydrogenation of methyl pyruvate. Compared to the enantiomeric excess (e.e.) value (71.4%) obtained without the presence of metal cations, obvious e.e. enhancement (up to 82.5%) was resulted from the addition of Zn^2 but with a certain decrease in activity. The reaction parameters in the presence of Zn^2 were also studied. It was found that the Pt colloidal catalysts in the presence of metal cations performed very differently from that in the absence of metal cations.     

Application of recoverable nanosized palladium(0) catalyst in Sonogashira reaction

In the absence of ligand, copper and amine, a recoverable nanoparticle palladium(0) catalyzed Sonogashira reaction of aryl iodides and bromides with terminal alkynes was developed. The protocol involved the use of an environmental-friendly reaction system with ethanol as the solvent, potassium carbonate as a base, and poly(vinylpyrrolidone) (PVP) supported nanosized palladium metal colloids as the catalyst. The palladium metal was recovered and recycled by a simple decantation of the reaction solution and used for eight consecutive trials without significant loss of its reactivity.     

Effect of operating parameters on selective separation of heavy metals from binary mixtures via polymer enhanced ultrafiltration

Performance of continuous polymer enhanced ultrafiltration (PEUF) method was investigated for removal of mercury and cadmium from binary mixtures. This method includes the addition of polyethyleneimine (PEI) as a water soluble polymer to bind the metals, which was followed by ultrafiltration operation performed on both laboratory and pilot scale systems. The influence of various operating parameters such as temperature, metal/polymer ratio, presence of calcium ions and pH on retention of metals and permeate flux was investigated. To investigate the possibility of selective separation of mercury and cadmium, experiments were conducted for binary solutions at different pH and loading ratios. It was seen that the retention of mercury decreased and permeate flux increased when the temperature increased. The increased pH and decreased metal/polymer ratio, loading (L), resulted in higher retention of both metals. Shapes of retention vs. pH or L curves were very similar for both metals. Retentions stay almost constant at a value very close to unity until a critical L or pH value was reached, then, R decreases almost linearly with L or pH. However, retention of cadmium was affected more than that of mercury as the pH decreased and L increased. This leads to the selective separation of mercury and cadmium. At low pH values (about 5) and at high L values (about 0.3), mercury was removed by ultrafiltration operation while almost all cadmium passed through the membrane. At pH 5.5 and cadmium/polymer ratio about 0.35 and mercury/polymer ratio about 0.39, the highest separation factor was obtained as 49.