笼形聚偕胺肟树脂的研究HX／ACAO树脂吸附贵金属

氢卤酸、硝酸、硫酸、磷酸和硼酸处理的笼形聚偕胺肟树脂（ＨＸ／Ａ－ＣＡＯ）对Ａｇ＋和等贵金属离子的吸附能力按如下顺序：ＰｄＣｌ４２－：Ｈ３ＢＯ３／ＡＣＡＯ＞ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ．ＩｒＣｌ６２－：ＢＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ≥ＨＮＯ３／ＡＣＡＯ．ＰｔＣｌ６２：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ．Ａｇ＋：ＢＣＡＯ＞Ｈ３ＢＯ３／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／ＡＣＡＯ＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＮＯ３／ＡＣＡＯ．ＡｕＣｌ４－：ＢＣＡＯ＞Ｈ３ＢＯ３＞Ｈ３ＰＯ４／ＡＣＡＯ＞ＨＦ／ＡＣＡＯ＞ＨＣｌ／Ａ－ＣＡＯ＞Ｈ２ＳＯ４／ＡＣＡＯ＞ＨＩ／ＡＣＡＯ＞ＨＮＯ３／Ａ－ＣＡＯ．研究了Ｈ３ＢＯ３／ＡＣＡＯ树脂对Ａｇ＋和离子的吸附动力学，讨论了吸附机理．     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

羰基过渡金属异核原子簇(PPh3)2CuFe2Co(CO)8(μ3-S)和(PPh3)3AuFe2Co(CO)7(μ3-S)的合成与表征

本文利用高压法制备HFe₂Co(CO)₉(μ₃-S),作为原料,经脱质子化作用,再分别与(PPh₃)₂Cu(NO₃)和PPh₃AuCl反应,将Ph₃Cu-或Ph₃Au-联接到原始簇合物的中心骨架上,使簇核扩大,得到了组成为(PPh₃)₂CuFe₂Co(CO)₈(μ₃-S)和(PPh₃)₃AuFe₂Co(CO)₇(μ₃-S)的化合物.文中对此两个新化合物进行了IR,UV,¹H和³¹P NMR.元素分析、熔点测定等性质表征,并对(PPh₃)₂CuFe₂Co(CO)₇(μ₃-S)进行了单晶X-射线衍射分析.两个化合物具有类似的中心骨架,在Fe₂和Co原子三角形的上面和下面分别键联着Cu和S,或Au和S原子,构成了三角双锥结构.其中一个簇合物由二个三苯基膦和八个羰基配位,另一个则由三个三苯基膦和七个羰基配位.     

Thermodynamic study of complex formation of benzo-18-crown-6 with K+, Tl+, and Pb2+ in water

H ⁰ and S ⁰ values of the complex formation in water of benzo-18-crown-6 (B18C6) with K⁺, Tl⁺, and Pb²⁺ were determined and compared with those of 18-crown-6. The H⁰ values of B18C6 are negative. The stability in water of the B18C6-metal ion complex at 25°C is governed largely by the magnitude of the H ⁰ value. The B18C6-metal ion complex is less stable in water than the corresponding 18C6-metal ion complex. This is due largely to a less favorable enthalpic contribution of the B18C6-metal ion complex compared with the corresponding 18C6-metal ion complex. The two aromatic ether oxygen atoms of B18C6 are responsible for the larger H ⁰ value of the B18C6-metal ion complex compared with the corresponding 18C6-metal ion complex.     

Metal carbonyl catalysis of carbon monoxide and formate reactions

The water gas shift reaction (CO + H₂O = CO₂+ H₂) is catalyzed by aqueous metal carbonyl systems derived from simple mononuclear carbonyls such as Fe(CO)₅ and M(CO)₆ (M = Cr, Mo, and W) and bases in the 140–200 °C temperature range. The water gas shift reaction in a basic methanol-water solution containing Fe(CO)₅ is first order in [Fe(CO)₅], zero order in [CO], and essentially independent of base concentration and appears to involve an associative mechanism with a metallocarboxylate intermediate [(CO)₄Fe-CO₂H]^–. The water gas shift reactions using M(CO)₆ as catalyst precursors are first order in [M(CO)₆], inverse first order in [CO], and first order in [HCO₂ ^–] and appear to involve a dissociative mechanism with formatometallate intermediates [(CO)₅M-OCHO]^–.The Reppe hydroformylation of ethylene to produce propionaldehyde and 1-propanol in basic solutions containing Fe(CO)₅ occurs at 110–140 °C. This reaction is second order in [Fe(CO)₅], first order in [C₂H₄] up to a saturation pressure >1.5 MPa, and inhibited by [CO]. These experimental results suggest a mechanism where the rate-determining step involves a binuclear iron carbonyl intermediate. The substitution of Et₃N for NaOH as the base facilitates the reduction of propionaldehyde to 1-propanol but results in a slower rate for the overall reaction.The homogeneous photocatalytic decomposition of the formate ion to H₂ and CO₂ in the presence of Cr(CO)₆ appears to be closely related to the water gas shift reaction. The rate of H₂ production from the formate ion exhibits saturation kinetics in the formate ion and is inhibited by added pyridine. The infrared spectra of the catalyst solutions indicate an LCr(CO)₅ intermediate. Photolysis of the Cr(CO)₆/formate system in aqueous methanol in the presence of an aldehyde RCHO (R =n-heptyl,p-tolyl, andp-anisyl) results in catalytic hydrogenation of the aldehyde to the corresponding alcohol RCH₂OH by the formate ion. Detailed kinetic studies onp-tolualdehyde hydrogenation by this method indicates saturation kinetics in formate ion, autoinhibition by thep-tolualdehyde, and a threshold effect for Cr(CO)₆ at concentrations >0.004 mol L^–1. The presence of an aldehyde can interrupt the water gas shift catalytic cycle by interception of an HCr(CO)₅ ^– intermediate by the aldehyde.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1533–1539, September, 1994.     

溶剂化金属原子浸渍法制备的Ni-Ag/γ-Al2O3催化剂的结构表征

应用溶剂化金属原子浸渍法和普通浸渍法制备了三种不同摩尔比的γ－Ａｌ２Ｏ３负载Ｎｉ－Ａｇ双金属催化剂。ＸＲＤ和磁测定结果表明ＳＭＡＩ催化剂中Ｎｉ和Ａｇ的粒度均小于金属相同的ＣＩ催化剂。ＳＭＡＩ催化剂中Ｎｉ和Ａｇ未形成合金，而ＣＩ催化剂中Ｎｉ和Ａｇ形成了合金。     

Setting up of recovery profiles: A tool to perform the compliance with recovery requirements for residue analysis

The use of the recovery term has presented some confusion in Analytical Chemistry. Recent IUPAC recommendations propose to distinguish between two terms: recovery or recovery factor, ℜ, and apparent recovery, ℜ*. Apparent recovery includes recovery factor and a new recovery term proposed in this paper, named calibration recovery, ℜ^C, which depends of the type of systematic error due to the matrix effect (constant and/or proportional) and is related to the applied calibration methodology. This paper highlights the dependence of the calibration recovery on the sample analyte concentration and, for extension, of the apparent recovery, defines the recovery profile, and makes evident the need to determine a “fit for purpose” analyte concentration interval to comply with a regulated recovery requirements. An approach to estimate the calibration recovery and its associated uncertainty in relation to the above-mentioned dependence is presented. The usefulness of the proposed methodology has been shown in the quantification of a pesticide by GC-ECD for assessing dermal exposure.     

烯丙位氧化的几种方法

综述了近年来烯丙位氧化的研究进展，详细讨论了过渡金属及其络合物、硒化 合物在烯丙位氧化中的应用，并简述了丁基锂方法、固相催化方法、生物氧化方法 和次氯酸钠氧化方法在烯丙位氧化中的应用．     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

Structure and energy studies of β-diketonates. XIII. Molecular structure of gadolinium tris-hexafluoroacetylacetonate Gd(C5O2HF6)3

In a mass spectrometric study, it was found that the saturated vapor over gadolinium tris-hexafluoroacetylacetonate Gd(C₅O₂HF₆)₃ contains molecular forms with a mass exceeding the mass of the dimer. The vapor overheated to 250–300°C contains only the monomer form. Simultaneous electron diffraction and mass spectrometric experiment aimed at investigating the structure of the Gd(hfa)₃ monomer molecule was carried out at 284(5)°C. The Gd(hfa)₃ molecule was found to have the symmetry of the equilibrium D ₃ configuration. The basic structural parameters are r _h1(Gd-O) = 2.291(10) Å, r _h1(O-C) = 1.257(10) Å, r _h1(C-C_r) = 1.404(6) Å, r _h1(C_F-F)_av = 1.341(3) Å, ∠OGdO = 72.8(0.4)°. The GdO₆ coordination polyhedron has the structure of a distorted antiprism. The rotation angle of the O-O-O trigonal faces relative to their position in a regular prism is 18.7(0.9)°. Quantum chemical calculations (HF/SBK, 6-31G*) generally reproduce the experimental structure, but the Gd-O internuclear distance is exaggerated by 0.04 Å.