Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

Synthesis and Crystal Structure of a Ternary Complex: [Ni(phen)2(pmal)]·8H2O

A new ternary complex [Ni(phen)(pmal)]·8H2O (phen = 1,10-phenanthroline,pmal2- = phenethyl malonic acid) has been synthesized by the reaction of nickel acetate, phen and phenethyl malonic acid. Elemental analysis, IR spectra and X-ray single-crystal diffraction were carried out to determine the composition and crystal structure. Crystal data for this complex: triclinic system, space group P1, a = 10.387(5), b = 13.112(6), c = 14.229(6) (A), α = 76.176(7), β =83.778(8), y = 71.770(6)°, C35H42N4O12Ni, Mr= 769.44, Z = 2, F(000) = 808, V = 1786.1 (A)3, Dc =1.431 g/cm3, μ = 0.612 mm-1, the final R = 0.0653 and wR = 0.1033 for 9379 (Rint = 0.0244)independent reflections and 4730 observed reflections (I ＞ 2σ(I)). Structural analysis shows that the coordination geometry of Ni(Ⅱ) is a distorted octahedron. A novel two-dimensional structure is constructed from (H2O)4 and (H2O)12 water clusters, and the complex forms a 3-D network supramolecular structure by hydrogen bonds and π-π stacking of neighboring phens.     

Tuning size and catalytic activity of nano-clusters of cobalt oxide

Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the resulting products examined by IR spectroscopy. In the case of method 3, the removal of surfactant was followed by TGA studies. Products from all three methods were identified by XRD. Peaks in low angle XRD indicate the porous nature of the oxides. The morphology of the pores was studied by transmission electron microscopy. Some irregular pore structures were obtained for samples from methods 1 and 2, with an average size of 4–6 nm. Only the product from method 3 using SDS as template showed ordered structure and optimum size, and Brunauer-Emmet-Teller surface areas of the as-prepared, as well as the treated samples, exhibited H3 type hysteresis. The samples from the three methods were used as catalysts in the oxidation reaction of cyclohexane under mild conditions and the catalytic efficiency of the cobalt oxide was comparable with mesoporous cobalt oxides.     

Synthesis in solid state, structural regularity and reaction mechanism for [VS_4-Cu_n] clusters

The reaction system (NH4)3VS4/CuCl/PPh3/Et4NBr afforded a series of [VS4-Cun] dusters with various core configurations in the solid state at low heating temperature. The structural regularity of [VS4-Cun] dusters and the influence of the CuCl:(NH4)3VS4 ratio as well as that of reaction temperature and time on the formation of duster core have been summarized. The reaction mechanism of forming V-Cu-S clusters has also been explored.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

Superdegenerate point in FCC phase diagram: CVM and Monte Carlo investigations

We investigate the topology of the phase diagram of binary alloys on the fee lattice with first-neighbor antiferromagnetic interactions around the superdegenerate point, where the L1₀ and L1₂ phases meet. We treat the system as a hard-constraint lattice gas, following a procedure previously described by Lebowitzet al. We perform cluster variation method calculations in theT0 limit and Monte Carlo simulations directly atT=0 K on the ground states of the superdegenerate point. We find that: (i) there is no disordered phase in the neighborhood of this point; (ii) a phase L for which two of the four cubic sublattices have the same average occupancy and each of the two others are different appears between L1₀ and L1₂; (iii) the transition L/L1₂ is of first order.     

Potentiometric studies on the complexation equilibria between some trivalent lanthanide metal ions and biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS)

Summary The chelation behaviour of some trivalent lanthanide and yttrium metal ion with biologically active 2-hydroxy-1-naphthaldehyde thiosemicarbazone (HNATS) has been investigated by potentiomotric measurements at 20±0.5°C in 75% (v/v) dioxane-water medium at various ionic strengths of sodium perchlorate. The method of Bjerrum and Calvin, as modified by Irving and Rossotti has been used to find out the values of (average number of ligand bound per metal ion) andpL (free ligand exponent). The formation constants of metal chelates have been computed on a PC-XT computer, using a program patterned after that of Sullivan et al. to give _n values using weighted least squares method. TheS _min values (S _min =²) have been calculated. The order of formation constants of chelates was found to be: La³⁺3+3+3+3+3+3+3+3+3+. The formation constants of the chelates formed have been correlated to size and ionization potentials of the metal ions.

---

Potentiometrische Untersuchungen der Komplexierungsgleichgewichte zwischen einigen trivalenten Metallionen und biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS)

Zusammenfassung Es wurde das Chelierungsverhalten einiger trivalenter Lanthanidenionen mit biologisch aktivem 2-Hydroxy-1-naphthaldehyd-thiosemicarbazon (HNATS) mittels potentiometrischer Messungen bei 20±0.5°C in 75% (v/v) Dioxan-Wasser bei verschiedener Ionenstärke an Natriumperchlorat untersucht. Die Methode nach Bjerrum und Calvin in der Modifikation nach Irving und Rossotti wurde zur Ermittlung der Werte (mittlere Anzahl an Liganden pro Metallion) undpL (Exponent an freiem Liganden) verwendet. Die Komplexbildungskonstanten wurden in Anlehnung an Sullivan et al. an einem PC-XT Computer errechnet. DieS _min-Werte (S _min=²) wurden ebenfalls bestimmt. Die Reihung der Chelatbildungskonstanten war: La³⁺3+3+3+3+3+3+3+3+3+. Die Bildungskonstanten sind mit der Größe und dem Ionisierungspotential der Metallionen zu korrelieren.

     

A new quantum statistical evaluation method for time correlation functions

Considering a system ofN identical interacting particles, which obey Fermi-Dirac or Bose-Einstein statistics, we derive new formulas for correlation functions of the type (whereB _j is diagonal in the free-particle states) in the thermodynamic limit. Thereby we apply and extend a superoperator formalism, recently developed for the derivation of long-time tails in semiclassical systems. As an illustrative application, the Boltzmann equation value of the time-integrated correlation functionC(t) is derived in a straightforward manner. Due to exchange effects, the obtained t-matrix and the resulting scattering cross section, which occurs in the Boltzmann collision operator, are now functionals of the Fermi-Dirac or Bose-Einstein distribution.     

金属表面在反射方向产生光学二次谐波的研究(Ⅰ)

用Rudnick和Stern引入的唯象参数“a”和“b”来描述表面电流,本文推导了金属表面在反射方向产生的光学二次谐波的表达式.由此证明了:从谐波信号随入射光偏振态的变化可以直接得到关于参数“a”的信息.和过去的实验相比,这种方法能更加精确、可靠地测定“a”的数值.