Carbon-Based Materials as Lithium Hosts for Lithium Batteries

Lithium (Li) metal has attracted significant attention in areas that range from basic research to various commercial applications due to its high theoretical specific capacity (3860 mA h g⁻¹) and low electrochemical potential (−3.04 vs. standard hydrogen electrode). However, dendrites often form on the surfaces of Li metal anodes during cycling and thus lead to battery failure and, in some cases, raise safety concerns. To overcome this problem, a variety of approaches that vary the electrolyte, membrane, and/or anode have been proposed. Among these efforts, the use of three-dimensional frameworks as Li hosts, which can homogenize and minimize the current density at the anode surface, is an effective approach to suppress the formation of Li dendrites. Herein, we describe the development of using carbon-based materials as Li hosts. While these materials can be fabricated into a variety of porous structures, they have a number of intrinsic advantages including low costs, high specific surface areas, high electrical conductivities, and wide electrochemical stabilities. After briefly summarizing the formation mechanisms of Li dendrites, various methods for controlling structural and surface chemistry will be described for different types of carbon-based materials from the viewpoint of improving their performance as Li hosts. Finally, we provide perspective on the future development of Li host materials needed to meet the requirements for their use in flexible and wearable devices and other contemporary energy storage techniques.     

Nickel sulphide-reduced graphene oxide composites as counter electrode for dye-sensitized solar cells: Influence of nickel chloride concentration

Nickel sulphide-reduced graphene oxide (NiS-rGO) composite films have been prepared via modified Hummers’s method assisted with spin coating technique. The NiS-rGO samples were then employed as counter electrode in a dye-sensitized solar cell (DSSC). The main aim of this work is to investigate the relationship between the concentrations of NiCl₂ with the properties of NiS-rGO and performance parameters of the device. The dominant rGO and minor NiS phase exist in the composite. The morphology of the composite is white strips rGO and NiS agglomerate particle. The element of C, O, Ni and S present in the composite. The highest η of 1.04% and J_sc of 7.39 mA cm⁻² were obtained from the device with 0.06 M NiCl₂ resulted from the longest carrier lifetime. The photovoltaic parameters results reveal that NiS-rGO composite has potential to become as a free platinum counter electrode of DSSC.     

Metal–Organic Framework (MOF)-Derived Carbon-Mediated Interfacial Reaction for the Synthesis of CeO2−MnO2 Catalysts

CeO₂-based catalysts are widely studied in catalysis fields. Developing one novel synthetic approach to increase the intimate contact between CeO₂ and secondary species is of particular importance for enhancing catalytic activities. Herein, an interfacial reaction between metal–organic framework (MOF)-derived carbon and KMnO₄ to synthesize CeO₂−MnO₂, in which carbon is derived from the pyrolysis of Ce-MOFs under an inert atmosphere, is described. The MOF-derived carbon is found to restrain the growth of CeO₂ crystallites under a high calcination temperature and, more importantly, intimate contact within CeO₂/C is conveyed to CeO₂/MnO₂ after the interfacial reaction; this is responsible for the high catalytic activity of CeO₂−MnO₂ towards CO oxidation.     

Infrared spectroscopy of closed s-shell gas-phase M+(N2O)n (M = Li,Al) ion-molecule complexes*

ABSTRACT

We present the results of a combined experimental and computational study of the structures of gas-phase M⁺(N₂O)_n (M?=?Li, Al) complexes. Infrared spectra were recorded in the region of the N₂O asymmetric (N?=?N) stretch using photodissociation spectroscopy employing the inert messenger technique. Unlike in our previous studies on M⁺(N₂O)_n (M?=?Cu, Ag, Au and M?=?Co, Rh, Ir) complexes, N– and O–bound isomers in this case are near isoenergetic and are not distinguished spectroscopically at this resolution. In the case of Li⁺ complexes, there is, however, evidence for the presence of bound N₂ moieties, indicating the presence of inserted, OLi⁺N₂(N₂O)_n–type structures. The weak N₂ band lies to the blue of the signature of molecularly N– and O–bound ligands and is well–reproduced in the simulated spectra of energetically low-lying structures computed from density functional theory. No such inserted isomers are observed in the case of Al⁺(N₂O)_n complexes whose infrared spectra can be understood on the basis of molecularly-bound N₂O ligands. The differences in M⁺(N₂O)_n structures observed for these closed–shell, ns², metal centres relative to other metal cations are discussed in terms of the likely bonding motifs.     

An Ion-Exchangeable MOF with Reversible Dehydration and Dynamic Structural Behavior (NH4)2[Zn2(O3PCH2CH2COO)2]⋅5 H2O (BIRM-1)

(NH₄)₂[Zn₂(O₃PCH₂CH₂COO)₂]⋅5 H₂O (BIRM-1) is a new metal phosphonate material, synthesized through a simple hydrothermal reaction between zinc nitrate and 3-phosphonopropionic acid, using urea and tetraethylammonium bromide as the reaction medium. In common with other metal–organic framework materials, BIRM-1 has a large three-dimensional porous structure providing potential access to a high internal surface area. Unlike most others, it has the advantage of containing ammonium cations within the pores and has the ability to undergo cation exchange. Additionally, BIRM-1 also exhibits a reversible dehydration behavior involving an amorphization-recrystallization cycle. The ability to undergo ion exchange and dynamic structural behavior are of interest in their own right, but also increase the range of potential applications for this material. Here the crystal structure of this new metal phosphonate and its ion exchange behavior with K⁺ as an exemplar are studied in detail, and its unusual structure-reviving property reported.     

Side-on-End-on Coordination of Dinitrogen on a Polynuclear Vanadium Nitride Cluster Anion [V5N5]−

The side-on-end-on coordination of N₂ can be very important to activate and functionalize this very stable molecule. However, such coordination has rarely been reported. This study reports a gas-phase species (a polynuclear vanadium nitride cluster anion [V₅N₅]⁻) that can capture N₂ efficiently (12 %), and the quantum chemistry modelling suggests an unusual side-on-end-on coordination. The cluster anions were generated by laser ablation and the reaction with N₂ has been characterized by mass spectrometry, photoelectron imaging spectroscopy, and density functional theory calculations. The back-donation interactions between the localized d–d bonding orbitals on the low-coordinated dual metal (V) sites and the antibonding π* orbitals of N₂ are the driving forces to adsorb N₂ with a high binding energy (about 2.0 eV).     

Biomolecular docking,antimicrobial and cytotoxic studies on new bidentate schiff base ligand derived metal (II) complexes

Three new metal complexes [Cu(L)₂] (1), [Co(L)₂] (2) and [Zn(L)₂] (3) have been prepared by the reaction of hydrated salts of metal (II) acetate with new Schiff base ligand HL, [2‐((4‐(dimethylamino)phenylimino)methyl)‐4,6‐di‐t‐butylphenol] and characterized by different physico‐chemical analyses such as elemental analysis, single XRD, ¹H NMR, FTIR and UV–Vis spectroscopic techniques. Their biomolecular docking, antimicrobial and cytotoxicity studies have also been demonstrated. The proposed structure of Schiff base ligand HL and complex 2 are confirmed by Single crystal X‐ray crystallography study. This analysis revealed that metal (II) complexes remain in distorted tetrahedral coordination environments. The electronic properties such as HOMO and LUMO energies are carried out by gaseous phase DFT/B3LYP calculations using Gaussian 09 program. Complex 1 showed a good binding propensity to the DNA and HSA, during the assessment of docking studies. Schiff base ligand HL and its metal (II) complexes, 1–3 screened for their in vitro antimicrobial activities using the disc diffusion method against selected microbes. Complex 1 shows higher antimicrobial activity than complexes 2, 3 and Schiff base ligand HL. According to the results obtained from the cytotoxic studies, Schiff base ligand HL and its metal (II) complexes 1–3 have better cytotoxicity against MCF‐7 cell lines with potency higher than the currently used chemotherapeutic agent cyclophosphamide.     

Synthesis,crystal structure,DNA/bovine serum albumin binding and antitumor activity of two transition metal complexes with 4‐acylpyrazolone derivative

Two new complexes, namely [Cu₆L₆] ( 1 ) and [Zn(HL)₂] ( 2 ) (H₂L = N‐(1‐phenyl‐3‐methyl‐4‐propenylidene‐5‐pyrazolone)‐2‐furancarboxylic acid hydrazide), have been synthesized and characterized. Single crystal X‐ray analysis indicates that complex 1 has a hexanuclear structure and complex 2 exhibits a mononuclear structure. The DNA/bovine serum albumin (BSA) binding properties of complexes 1 and 2 were investigated by absorption spectroscopy and fluorescence quenching. Both complexes could effectively intercalate to DNA with calculated quenching constants of 2.6 × 10⁵ and 1.25 × 10⁵ M^?1, respectively. The quenching mechanism of the intrinsic fluorescence of BSA by the complexes was found to be a static one. The cytotoxicities of 1 and 2 were investigated in two human tumor cell lines, human esophageal cancer cells (Eca‐109) and cervical cancer cells (HeLa). Complex 1 exhibits higher antitumor activity than 2 . Furthermore, 1 can inhibit HeLa cells by inducing apoptosis and G0/G1 phase cell cycle arrest. All results demonstrate that 1 and 2 both have DNA/BSA binding capacity and antitumor activity.     

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.     

A Self-Healing Metal–Organic Hydrogel for an All-Solid Flexible Supercapacitor

A zinc containing metal–organic gel (Zn-MOG) with embedded free ions, which exhibits self-healing properties, has been synthesized for application in supercapacitors. The activated carbon-based flexible supercapacitor device with the MOG electrolyte has a broad potential window of 2.1 V, with high retention of specific capacitance compared to the traditional polyvinyl alcohol (PVA)-based gel. The Zn-MOG does not require an additional electrolyte. The sodium and sulphate ions embedded in the MOG are sufficient enough for the charge storage.