电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

流动注射-氢化物发生-原子吸收光谱法测定雪中的微量铅

建立了测定雪中微量铅的流动注射-氢化物发生-原子吸收光谱法。在优化条件下。测定铅的线性范围为0～52．0ng／mL，线性回归方程为A=0．018c 0．016，相关系数r=0．9995，检出限为0．2ng／mL。用于雪中微量铅的测定，加标回收率为94．2％～107．3％，相对标准偏差为1．47％～3．22％。该方法的测定结果与标准加入法基本一致。     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.     

Voltammetric Detection of the DNA Interaction with Toluidine Blue

Binding reactions of toluidine blue (TB) with herring fish DNA in pH 6.0 Britton–Robinson (B–R) buffer solution have been investigated by cyclic voltammetry and linear‐sweep voltammetry at a glassy carbon electrode. TB has a couple of well‐defined redox peaks. The addition of DNA into the TB solution resulted in the decrease of the redox‐peak currents and the shift negatively of the anodic peak potential. The values of the electrochemical parameters such as the electron number of the electrochemical reaction, the electron transfer coefficient and the electrochemical reaction standard rate constant in the absence and presence of DNA, as well as the values of binding constant and binding ratio of DNA with TB were obtained. Almost unchanged values of the electrochemical parameters in the absence and presence of DNA show that nonelectroactive complexes were formed when TB interacted with DNA. DNA concentration can be determined by the decrease of the peak current of TB. The binding mode of TB with DNA was discussed.     

Ce(H_2O)_7Al(OH)_6Mo_6O_(18)·4H_2O: A New One-dimensional Zigzag Chainlike Structure of Anderson Cluster Linked by Cerium Ions

IntroductionPolyoxometalates(POMs),as an important familyof metal oxides,have been receiving considerable at-tention in solid-state materials chemistry due to their di-verse topological properties and potential applications incatalysis,photochemistry,electrochemistry,medicineand magnetism[1,2].Recently,one of the intriguingfields in the polyoxometalate chemistry is to find somenovel subunits and then connect them into one-,two-,even three-dimensional(1-,2-,even3-D)extendednetworks,either thro…     

Synthesis and Structure of Ag_3PSe_4

The title compound Ag3PSe4 was synthesized by the reaction of Ag powder,P2Se5 and Se in a molar ratio of 1:1:1 at 500℃ and structurally characterized by X-ray crystallography.The crystal belongs to orthorhombic,space group Pmn21 with cell parameters:a=7.689(4),b=6.660(3),c=6.379(4)A,V=326.7(3)A^3,Z=2,Dc=6.816g/cm^3,Mr=670.42,F(000)=584,μ=31.302mm^-1,R=0.0606,wR=0.1289 and S=1.012,The 3-D structure can be regarded as constructed from the stacking of puckered Ag-P-Se honeycomb-like sheets along the c direction,in which the Ag,P and Se atoms are bonded to each other to form a chair-like six-membered ring,and the rings then build the sheets by sharing edges.     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

Adsorption of poly(ethylene glycol)s on mercury/aqueous solution interface 1. Kinetics of PEG 8000 adsorption

In order to study the influence of the adsorption of fulvic compounds on voltammetric signals and to understand better the adsorption of these compounds on hydrophobic natural water interfaces, adsorption studies of macromolecules such as poly(ethylene glycol) (HO(CH₂CH₂O)_n) with molecular weight of 8000 were done on the mercury/water interface by a.c. voltammetry at the potential of zero charge. The maximum surface concentration, adsorption equilibrium constant and adsorption rate constant have been determined from the global adsorption mechanism, controlled by two determining steps: diffusion and kinetics of adsorption at the interface.     

过氧化物模拟酶在介体型生物传感器方面应用初探

meso-四(4-磺基苯)卟啉锰(Ⅲ)作为过氧化物模拟酶可催化H_2O_2与K_4Fe(CN)_6反应。电流响应与H_2O_2浓度在3.0×10~(-4)～1.0×10~(-3)mol/L范围内呈线性关系。重现性和回收率良好。抗坏血酸和DL-半胱氨酸干扰严重。