Use of Ag(II) as a removable template in porphyrin chemistry: diol cleavage products of [meso-tetraphenyl-2,3-cis-diolchlorinato]silver(II)

The use of Ag^II as a removable template in synthetic porphyrin chemistry is described. Mild procedures for the insertion of Ag^II into chlorins and the demetallation of the [chlorinato]Ag^II complexes are delineated. The UV-vis spectra of the novel [chlorinato]Ag^II complexes are discussed. The diol cleavage products of [meso-tetraphenyl-2,3-diolchlorinato]silver(II) under a number of conditions are characterized and compared to those resulting from the cleavage of the corresponding free base diol chlorin or its Ni^II complex, highlighting the unique templating effect of Ag^II. The scopes and limits of electrospray ionization mass spectrometry (ESI-MS) for the analysis of Ag^II chlorins is described. The use of Ag^II as a templating metal is superior over Ni^II or Zn^II for the preparation of free base pyrrole-modified porphyrins along metal templated pathways.     

Synthesis and transformations of metallacycles 33. The first example of cycloalumination of cyclonona-1,2-diene with Et<Subscript>3</Subscript>Al and EtAlCl<Subscript>2</Subscript> in the presence of Cp<Subscript>2</Subscript>ZrCl<Subscript>2</Subscript>

Catalytic cycloalumination of cyclonona-1,2-diene upon treatment with Et₃Al and EtAlCl₂ in the presence of Cp₂ZrCl₂, leading to 10-ethyl-10-aluminabicyclo[7.3.0^1,9]dodec-8-ene (1) and 11-ethyl-11-aluminatricyclo[10.7.0^1,12.0^2,10]nonadeca-9,12-diene, respectively, was accomplished in high yields. A possibility for the selective transformation of compound 1 to 1-allyl-9-(pent-4-enyl)cyclonon-1-ene and 10-hydroxybicyclo[7.3.0^1,9]dodec-8-ene in one preparative step was demonstrated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2156–2159, November, 2007.     

Orbital correlation effects: The independent pair-potential approximation with application to the ground state and first ionized state of boron hydride

A new method is proposed for calculating correlation effects in atomic and molecular systems. The basis of the method is the formulation of a set of partial configuration expansions which yield directly variational orbital correlation corrections which are appropriately summed in order to obtain an estimate of the total correlation energy. This method is applied to the ground state of boron hydride and its cation at the equilibrium distance of BH. The results of the method are compared in detail with independent electron pair results and second order CI results. It is further shown that multiple substitutions are approximately accounted for in this method and the extent to which they are included is compared with other approximations. Finally, three methods of increasing accuracy, aimed at reducing the necessary computational effort, are given for determining the vertical ionization potential. The most economical method yields an IP of 9.70 eV or 0.03 eV less than the experimental IP. Completion of the basis is estimated to improve this value to 9.77 eV.     

Advanced Current Collectors for Alkali Metal Anodes

High-energy-density batteries are in urgent need to solve the ever-increasing energy storage demand for portable electronic devices, electric vehicles, and renewable solar and wind energy systems. Alkali metals, typically lithium(Li), sodium(Na) and potassium(K), are considered as the promising anode materials owing to their low electrochemical potential, low density, and high theoretical gravimetric capacities. However, the problem of dendrite growth of alkali metals during their plating/stripping process will lead to low Coulombic efficiencies, a short lifespan and huge volume expansion, eventually hindering their practical commercialization. To resolve this issue, a very effective approach is engineering the anodes on structured current collectors. This review summarizes the development of the alkali metal batteries and discusses the recent advances in rational design of anode current collectors. First, the challenges and strategies of suppressing alkali-metal dendrite growth are presented. Then the special attention is paid to the novel current collector design for dendrite-free alkali metal anodes. Finally, we give conclusions and perspective on the current challenges and future research directions toward advanced anode current collectors for alkali metal batteries.     

Synthesis and characterization of poly(4-vinyl,2′-carboxybensophenone)

The synthesis and characterization of poly(4-vinyl,2′-carboxybenzophenone) ion exchange resin is described. This resin displays a remarkably high capacity for Cu²⁺. Control of pH permits selective adsorption and estimation of Fe³⁺. This ion-exchanger is quite stable to loading acid washing cycles. © 1995 John Wiley & Sons, Inc.     

Novel Catalytic Dielectric Barrier Discharge Reactor for Gas-Phase Abatement of Isopropanol

Catalytic gas-phase abatement of air containing 250 ppm of isopropanol (IPA) was carried out with a novel dielectric barrier discharge (DBD) reactor with the inner catalytic electrode made of sintered metal fibers (SMF). The optimization of the reactor performance was carried out by varying the voltage from 12.5 to 22.5 kV and the frequency in the range 200–275 Hz. The performance was significantly improved by modifying SMF with Mn and Co oxide. Under the experimental conditions used, the MnO _x /SMF showed a higher activity towards total oxidation of IPA as compared to CoO _x /SMF and SMF electrodes. The complete destruction of 250 ppm of IPA was attained with a specific input energy of ∼235 J/L using the MnO _x /SMF catalytic electrode, whereas, the total oxidation was achieved at 760 J/L. The better performance of the MnO _x /SMF compared to other catalytic electrodes suggests the formation of short-lived active species on its surface by the in-situ decomposition of ozone.     

Evolution of lowest singlet and triplet excited states with transition metals in group 10-12 metallaynes containing biphenyl spacer

A new series of thermally stable group 10 platinum(II) and group 12 mercury(II) poly-yne polymers containing biphenyl spacer trans-[-Pt(PBu₃)₂CC(p-C₆H₄)₂CC-]_n and [HgCC(p-C₆H₄)₂CC-]_n were prepared in good yields by Hagihara’s dehydrohalogenation reaction of the corresponding metal chloride precursors with 4,4′-diethynylbiphenyl HCC(p-C₆H₄)₂CCH at room temperature. We report the optical spectroscopy of these polymetallaynes and compare the results with their bimetallic model complexes trans-[Pt(Ph)(PEt₃)₂CC(p-C₆H₄)₂CCPt(Ph)(PEt₃)₂] and [MeHgCC(p-C₆H₄)₂CCHgMe] as well as the group 11 gold(I) counterpart [(PPh₃)AuCC(p-C₆H₄)₂CCAu(PPh₃)]. The structural properties of all model complexes have been studied by X-ray crystallography. The influence of the heavy metal atom in these metal alkynyl systems on the intersystem crossing rate and the spatial extent of lowest singlet and triplet excitons is systematically characterized. Our investigations indicate that the organic triplet emissions can be harvested by the heavy-atom effect of group 10-12 transition metals (viz., Pt, Au, and Hg) which enables efficient intersystem crossing from the S₁ singlet excited state to the T₁ triplet excited state.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

Transition metal clusters and supported species with metal-carbon bonds from first-principles quantum chemistry

We discuss the impact of density functional electronic structure calculations for understanding the organometallic chemistry of transition metal (TM) surface complexes and clusters. Examples will cover three types of systems, mainly of interest in the context of heterogeneous catalysis: (i) supported carbonyl complexes of rhenium on MgO and of rhodium in zeolites, (ii) TM clusters with CO ligands and adsorbates, and (iii) metal clusters exhibiting chemical bonds with atomic carbon. The first group of case studies promotes the concept that surface groups of oxide supports are bonded to TM complexes in the same way as common (poly-dentate) ligands are bonded in coordination compounds. The second group of examples demonstrates various “ligand effects” of TM clusters. Finally, we illustrate how carbido centers stabilize TM clusters and modify the propensity for adsorption at the surface of such clusters.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.