Thermal transformations in systems based on zeolites Y,X, and A containing zinc and sodium nitrates

Thermal transformations in systems formed by interaction of Zn and Na nitrates with Y, X, and A zeolites were studied by TG—DTA technique. Temperature regions of existence of adsorbed water, water of crystallization, and decomposition of NO₃ ^– anion were determined. These intervals depend on the composition, structure, method of preparation, and pre-treatment conditions of zeolite systems. The extent of NO₃ ^– decomposition depends not only on the zinc and sodium content but also on the presence of ammonia involved in NO₃ ^– reduction. The zeolite matrix strongly stabilizes the occluded NO₃ ^– anions. A portion of zinc oxide formed by zinc nitrate decomposition is probably localized inside the zeolite cavities as the [Zn—O—(ZnO) _n —Zn]²⁺ particles. The latter compensate charges of the isolated [AlO₄]^– tetrahedra.     

Structural and Adsorptive Characteristics of Pyrocarbon/Silica Gel Si-60

Pyrocarbon/silica gel adsorbents (carbosils, CS) with mesoporous Si-60 (Merck, granule size 0.2–0.5 mm) modified by pyrolysis of CH₂Cl₂ at 823 K and reaction time from 0.5 to 6 h and then hydrothermally treated at 473 K for 6 h were studied by means of TEM, adsorption and ¹H NMR methods. Changes in the structural and adsorptive characteristics of hybrid adsorbents before and after hydrothermal treatment, which depend on pyrocarbon content (C _C), were analyzed on the basis of TEM micrographs and p-nitrophenol and nitrogen adsorption isotherms treated using a constrained regularization method. Interfacial water layers in aqueous suspension of CS were investigated by means of ¹H NMR with freezing-out of bulk water at T < 273 K showing nonlinear changes in the Gibbs free energy of interfacial water with increasing C _C because of nonlinear dependence of the structural characteristics of pyrocarbon deposits and CS as a whole on C _C.     

Acid properties of semicrystalline zeolitic mesoporous UL-ZSM-5 materials

UL-ZSM-5 materials have been prepared by templated solid-state crystallization of zeolites starting from the amorphous mesostructured aluminosilicate Al-Meso. Microcalorimetry and FTIR have been employed to characterize their surface acidity. In good agreement with ²⁷Al MAS NMR data, UL-ZSM-5 displayed an improved density and strength of Brönsted acid sites, as compared to Al-Meso, owing to the incorporation of aluminium in a tetrahedral environment similar to that of zeolite ZSM-5. Moreover, they showed an enhanced Brönsted/Lewis relative acid ratio. However, Al-Meso showed the highest concentration of strong Lewis acid sites due to its largest amount of aluminium in extraframework positions.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.     

Fischer-Tropsch synthesis over cobalt catalysts supported on modified SiO2 with mesoporous silica

SiO₂ was modified by hexagonal mesoporous silica to form a mixture with meso-/macroporous sizes and used as support of Co catalysts for Fischer-Tropsch synthesis in a slurry phase. A synergistic effect on the activity of Co catalyst was found. The catalytic properties are related to the state of surface Co and the character of support.     

Sol-Gel Routes to Zeolite Membranes and Thin Films

The synthesis of zeolite membranes and thin films using the secondary growth process is briefly described. In this process colloidal zeolite particles (sols) are prepared hydrothermally and then subsequently deposited on substrates to produce uniform layers of controlled thickness, as illustrated with silicalite and zeolite-A. The formation and growth of the zeolite sols has been investigated in situ by small angle neutron scattering (SANS). SANS measurements on silicalite sols at progressively higher concentrations have provided details of the colloid interactions which lead to zeolite gel-layer structures which are uniform and free of defects.     

SSZ-53 and SSZ-59: two novel extra-large pore zeolites

The syntheses, structure solutions, and physicochemical and catalytic characterizations of the novel zeolites SSZ-53 and SSZ-59 are described. SSZ-53 and SSZ-59 were synthesized under hydrothermal conditions with the [1-(4-fluorophenyl)cyclopentylmethyl]trimethyl ammonium cation and 1-[1-(4-chlorophenyl)cyclopentylmethyl]-1-methyl azocanium cation, respectively, as structure-directing agents. The framework topology of SSZ-53 was solved with the FOCUS method, and the structure of SSZ-59 was determined by model building. Rietveld refinement of synchrotron X-ray powder diffraction data confirms each proposed model. SSZ-53 and SSZ-59 each possess a one-dimensional channel system delimited by 14-membered rings. Results from transmission electron microscopy, electron diffraction, catalytic experiments (spaciousness index and constraint index tests), and argon and hydrocarbon adsorption experiments are consistent with the proposed structures.     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

Thermal behavior of multiwall carbon nanotube/zeolite nanocomposites

Summary In this study we report the synthesis and thermal characterization of multiwall carbon nanotubes containing zeolite based nanocomposites. Three different zeolites (LTA, FAU and MFI) were used in this study and it was observed that the morphologies of the synthesized nanocomposites were significantly different. For FAU zeolite nanocrystals with a few nm in diameter were nucleated on the nanotubes covering their surface, however, for LTA and MFI zeolites bulky crystals with nanotubes crossing them were observed by transmission electron microscopy. One of the most important results of our study was the generation of secondary mesoporosity in the zeolites after removing the carbon nanotubes.