Preparation of Anatase Hollow TiO2 Spheres and Their Photocatalytic Activity in the Photodegradation of Chlorpyrifos

Hollow anatase titania (TiO₂) spheres were synthesized using fructose and tetrabutyl titanate (Ti(OC₄H₉)₄, TBT) as the precursors via the conventional hard template method. The morphological, structural and thermal properties of the products were characterized using scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG‐DTA), Brunauer? Emmett? Teller (BET) surface area analysis and diffuse reflectance ultraviolet visible (DR UV? Vis) spectroscopy. XRD revealed that the hollow TiO₂ prepared was in the anatase phase and the BET surface area measured was about 22 m² g^?1. The photocatalytic activity of the synthesized hollow anatase TiO₂ in the photodecomposition of chlorpyrifos was 18.67 % higher than that obtained using commercial TiO₂.     

载体对Ni_2P催化剂加氢脱氮反应性能的影响

使用TiO2、Al2O3以及TiO2-Al2O3复合载体考察了载体对磷化镍催化剂活性相和加氢脱氮性能的影响。不同钛铝原子比的TiO2-Al2O3复合载体采用原位-溶胶凝胶法制备,负载的磷化镍催化剂采用等体积浸渍法和H2原位还原法制备。以喹啉为模型化合物在固定床反应器上对催化剂的加氢脱氮性能进行评价,采用XRD、N2吸附、TEM和H2-TPR等技术对催化剂和载体进行了表征。结果表明,制成的复合载体基本保留了最初引入的γ-Al2O3的孔特征,分散在γ-Al2O3表面的TiO2以锐钛矿晶型存在。不同载体对催化剂的H2还原行为有显著影响,所形成的活性物种也不相同。Al2O3中引入TiO2可以减弱P物种和Al2O3之间的相互作用,有利于Ni2P活性相的生成和催化活性的提高。当Ti/Al的原子比为1∶8时,Ni2P/TiO2-Al2O3催化剂比Ni2P/TiO2、Ni2P/Al2O3催化剂具有更高的加氢脱氮活性。     

掺氮介孔炭作为双功能材料用于氧还原与超级电容器

以壳聚糖为含氮碳源,正硅酸乙酯为软模板,硝酸镍为催化剂,通过简单的低温水热法及后续炭化,成功合成出掺氮介孔炭材料（NMC-1）.NMC-1含有多孔结构以及氮氧等杂原子,能提高其电催化性能、双电层电容与赝电容.由于NMC-1在碱液中表现出显著的催化氧还原反应活性和具有较高的超级电容器比电容（在0.2A/g时为252F/g）及好的循环稳定性,因此,它有可能作为一种可再生、环保的双功能材料同时应用于燃料电池与超级电容器领域.     

Synthesis of spinel lithium titanate anodes incorporated with rutile titania nanocrystallites by spray drying followed by calcination

Lithium insertion into spinel Li₄Ti₅O₁₂ incorporated with rutile TiO₂ was investigated in order to clarify the redox mechanism responsible for the first plateau at 1.5 V vs. Li/Li⁺. Spherical Li₄Ti₅O₁₂ powders with an average diameter of 2-3 μm can be achieved by spray drying followed by sintering process. The Li/Ti molar ratio in the precursor is selected as the factor for preparing spinel Li₄Ti₅O₁₂ powders with different concentrations of rutile TiO₂. The specific capacity from the first plateau at 1.5 V contributes to the major portion in the overall capacity. The rutile TiO₂ in spinel Li₄Ti₅O₁₂ anodes tends to improve the specific capacity at the first plateau. This can be attributed to two possible reasons: (i) rutile TiO₂ provides an additional number of sites (i.e., oxygen octahedral vacancy in rutile TiO₂) for the Li insertion, and (ii) less amount of residual Li oxides results in high electronic conductivity. The Li₄Ti₅O₁₂ anodes display high rate capability with low irreversible capacity, indicating good reversibility of insertion/de-insertion of Li ions. The results presented in this work show unambiguously that the presence of rutile TiO₂ in spinel Li₄Ti₅O₁₂ has a positive effect on the performance promotion of Li₄Ti₅O₁₂ anodes.     

有序介孔碳/石墨烯/镍泡沫的制备及其对多巴胺的高灵敏度和高选择性检测

柔性生物传感器在可穿戴电子设备中有着广泛的应用前景. 为了获得柔性电化学多巴胺传感器,作者在本工作中首先在镍泡沫表面通过化学气相沉积生长石墨烯,随后通过高温碳化嵌段共聚物与酚醛树脂在石墨烯表面共组装形成的薄膜制备了有序介孔碳/石墨烯/镍泡沫（OMC/G/Ni）复合材料. 其中,镍泡沫可以为复合材料提供具有高导电性和良好柔韧性的金属骨架,而具有垂直排列介孔阵列的有序介孔碳层为复合材料提供了高的电活性表面积,且有利于活性位点的暴露. 值得注意的是,夹在有序介孔碳层和镍泡沫之间的石墨烯极大地增强了各组分之间的相容性,有利于进一步提升复合材料的电化学性能. 作为电化学传感器中的工作电极,OMC/G/Ni体现出优异的多巴胺检测能力. 不但具有宽的线性检测范围（0.05 ~ 58.75 μmol·L^-1）和低检测限（0.019 μmol·L^-1）,还具有良好的选择性、重现性和稳定性. 此外,OMC/G/Ni在弯曲状态下依旧能够保持对多巴胺的高检测能力,证明了其在柔性生物传感器中的应用潜力.     

Novel and efficient multifunctional periodic mesoporous organosilica supported benzotriazolium ionic liquids for reusable synthesis of 2,4,5-trisubstituted imidazoles

A series of periodic mesoporous organosilica supported benzotriazolium ionic liquids were synthesized and tested as effective and practical heterogeneous catalysts in the condensation reaction of diphenylethanedione, aromatic aldehydes and ammonium acetate. The catalyst PMO@ILBF4(1.0) showed brilliant catalytic activity for the synthesis of 2,4,5-trisubstituted imidazoles with good to high yields. We also found that the catalytic activity could be significantly influenced by the loading levels and functional anions of the benzotriazolium-cation ionic liquid, probably due to an intensification of intramolecular synergistic effect. Furthermore, the multifunctional catalyst PMO@ILBF4(1.0) could be easily recovered by filtration and recycled for six times with no significant loss in activity, indicating its excellent stability and reusability. This method provides an efficient and environmentally-friendly procedure for the production of 2,4,5-trisubstituted imidazoles.     

Optimization and Characterization of Mesoporous Sulfonated Carbon Catalyst and Its Application in Modeling and Optimization of Acetin Production

In this study, an optimized mesoporous sulfonated carbon (OMSC) catalyst derived from palm kernel shell biomass was developed using template carbonization and subsequent sulfonation under different temperatures and time conditions. The OMSC catalyst was characterized using acid-base titration, elemental analysis, XRD, Raman, FTIR, XPS, TPD-NH₃, TGA-DTA, SEM, and N₂ adsorption–desorption analysis to reveal its properties. Results proved that the OMSC catalyst is mesoporous and amorphous in structure with improved textural, acidic, and thermal properties. Both FTIR and XPS confirmed the presence of -SO₃H, -OH, and -COOH functional groups on the surface of the catalyst. The OMSC catalyst was found to be efficient in catalyzing glycerol conversion to acetin via an acetylation reaction with acetic acid within a short period of 3 h. Response surface methodology (RSM), based on a two-level, three-factor, face-centered central composite design, was used to optimize the reaction conditions. The results showed that the optimized temperature, glycerol-to-acetic acid mole ratio, and catalyst load were 126 °C, 1:10.4, and 0.45 g, respectively. Under these optimum conditions, 97% glycerol conversion (GC) and selectivities of 4.9, 27.8, and 66.5% monoacetin (MA), diacetin (DA), and triacetin (TA), respectively, were achieved and found to be close to the predicted values. Statistical analysis showed that the regression model, as well as the model terms, were significant with the predicted R² in reasonable agreement with the adjusted R² (<0.2). The OMSC catalyst maintained excellent performance in GC for the five reaction cycles. The selectivity to TA, the most valuable product, was not stable until the fourth cycle, attributable to the leaching of the acid sites.     

Dual Role of Silver Moieties Coupled with Ordered Mesoporous Cobalt Oxide towards Electrocatalytic Oxygen Evolution Reaction

Herein, we show that the performance of mesostructured cobalt oxide electrocatalyst for oxygen evolution reaction (OER) can be significantly enhanced by coupling of silver species. Various analysis techniques including pair distribution function and Rietveld refinement, X‐ray absorption spectroscopy at synchrotron as well as advanced electron microscopy revealed that silver exists as metallic Ag particles and well‐dispersed Ag₂O nanoclusters within the mesostructure. The benefits of this synergy are twofold for OER: highly conductive metallic Ag improves the charge transfer ability of the electrocatalysts while ultra‐small Ag₂O clusters provide the centers that can uptake Fe impurities from KOH electrolyte and boost the catalytic efficiency of Co–Ag oxides. The current density of mesostructured Co₃O₄ at 1.7 V_RHE is increased from 102 to 211 mA cm^?2 with incorporation of silver spices. This work presents the dual role of silver moieties and demonstrates a simple method to increase the OER activity of Co₃O₄.     

Highly ordered molecularly imprinted mesoporous silica for selective removal of bisphenol A from wastewater

Selective removal of bisphenol A from wastewater is quite challenging primarily because of its low concentration and matrix complexity. To this end, according to the molecular structure of bisphenol A, we designed a functional monomer for the preparation of molecularly imprinted mesoporous silica using click chemistry reaction. The resultant bisphenol A imprinted mesoporous silica was characterized by transmission electron microscopy, small angle X‐ray diffraction, and N₂ adsorption–desorption experiments. The results indicated that the bisphenol A imprinted mesoporous silica possessed a highly ordered periodic hexagonal mesostructure with the Brunauer–Emmett–Teller surface area of 944.28 m²/g. The bisphenol A imprinted mesoporous silica showed fast adsorption kinetics and the saturated adsorption capacity reached up to 88.6 mg/g at pH 6.5, and with relative selectivity factors ranged from 1.06 to 3.20. The adsorption efficiency of the bisphenol A imprinted mesoporous silica was above 97.96% after five extraction/elution cycles. The bisphenol A imprinted mesoporous silica was further applied to the selective removal of bisphenol A from real wastewater samples and showed great promise in practical applications.