TiO2表面电子结构及其光催化活性

利用ＨＣｌ和ＨＣｌＯ４对不同方法制备的ＴｉＯ２进行了表面修饰,发现经强酸修饰后ＴｉＯ２的光催化活性有明显提高,其中ＨＣｌ的修饰效果好于ＨＣｌＯ４。     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

Preparation,characterization and photocatalytic performance of polyoxometalate / polyaniline / titania ternary composite

A new CoW₁₁Mn/PANI/TiO₂ ternary composite was synthesized with K₈[Co(H₂O)MnW₁₁O₃₉] (CoW₁₁Mn) and PANI/TiO₂ by electrostatic self-assembly. These catalysts were characterized using infrared (IR) spectroscopy, X-ray diffraction, scanning electron microscopy, ultraviolet–visible spectroscopy, and N₂ adsorption–desorption. CoW₁₁Mn/PANI/TiO₂ was used to photodegradate the example contaminant, gentian violet (GV). Under the optimum photodegradation conditions, 92.63% degradation was achieved, indicating that the introduction of polyoxometalate and polyaniline greatly enhanced the photocatalytic performance of the catalyst. Moreover, CoW₁₁Mn/PANI/TiO₂ exhibits stable performance with little loss in activity after three successive runs. Thus, CoW₁₁Mn/PANI/TiO₂ ternary composite could be a promising photocatalyst in photodegradation of organic pollutants.     

Synthesis and Photocatalytic Property of Hectorite/(Pt,TiO2) and H4Nb6O17/(Pt,TiO2) Nanocomposites

Abstract

TiO₂ and Pt have been intercalated in hectorite and H₄Nb₆O₁₇. The height of TiO₂ and Pt pillars was less than 0.8 nm and the band gap energy of TiO₂ pillars was ca. 3.3 eV. Both hectorite/TiO₂ and H₄Nb₆O₁₇(Pt, TiO₂) were capable of hydrogen evolution following irradiation from a high pressure mercury are (λ > 290 nm) in the presence of methanol as a sacrificial hole acceptor and the hydrogen evolution was enhanced by co-incorporation of Pt, although hectorite and hectorite/Pt did not show photocatalytic activity. Incorporation of Pt or Pt and TiO₂ in the interlayer of H₄Nb₆O₁₇ has resulted in enhanced photo evolution of hydrogen, however, TiO₂ alone in the interlayer of H₄Nb₆O₁₇ showed adverse photocatalytic activity.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

An improved preparation of mesoporous silica‐supported Pd as sustainable catalysts for phosphine‐free Suzuki–Miyaura and Heck coupling reactions

An improved and eco‐friendly procedure has been developed to generate mesoporous silica‐supported palladium nanoparticles (SiO₂@PdNP) that could be used as a sustainable heterogeneous Pd catalyst for phosphine‐free Suzuki–Miyaura and Heck coupling reactions with excellent turnover number and turnover frequency. The presence of Pd on the silica surface was detected by X‐ray diffraction and the structural morphology of SiO₂@PdNP was obtained by transmission electron microscopy. The heterogeneous catalytic system is recyclable and leaching of the metal after the reaction is not apparently observed. Copyright © 2013 John Wiley & Sons, Ltd.     

Efficient Imine Formation by Oxidative Coupling at Low Temperature Catalyzed by High-Surface-Area Mesoporous CeO2 with Exceptional Redox Property

High-surface-area mesoporous CeO₂ (hsmCeO₂) was prepared by a facile organic-template-induced homogeneous precipitation process and showed excellent catalytic activity in imine synthesis in the absence of base from primary alcohols and amines in air atmosphere at low temperature. For comparison, ordinary CeO₂ and hsmCeO₂ after different thermal treatments were also investigated. XRD, N₂ physisorption, UV-Raman, H₂ temperature-programmed reduction, O₂ temperature-programmed desorption, EPR spectroscopy, and X-ray photoelectron spectroscopy were used to unravel the structural and redox properties. The hsmCeO₂ calcined at 400 °C shows the highest specific surface area (158 m² g⁻¹), the highest fraction of surface coordinatively unsaturated Ce³⁺ ions (18.2 %), and the highest concentration of reactive oxygen vacancies (2.4×10¹⁵ spins g⁻¹). In the model reaction of oxidative coupling of benzyl alcohol and aniline, such an exceptional redox property of the hsmCeO₂ catalyst can boost benzylideneaniline formation (2.75 and 5.55 mmol h⁻¹ based on >99 % yield at 60 and 80 °C, respectively) in air with no base additives. It can also work effectively at a temperature of 30 °C and in gram-scale synthesis. These are among the best results for all benchmark ceria catalysts in the literature. Moreover, the hsmCeO₂ catalyst shows a wide scope towards primary alcohols and amines with good to excellent yield of imines. The influence of reaction parameters, the reusability of the catalyst, and the reaction mechanism were investigated.     

Gold Nanoparticles Supported on Mesoporous Titania Thin Films with High Loading as a CO Oxidation Catalyst

In the present work, 2.4 nm gold nanoparticles (Au NPs) are uniformly dispersed on mesoporous titania thin films which are structurally tuned by controlling the calcination temperature. The gold content of the catalyst is as high as 27.8 wt %. To our knowledge, such a high loading of Au NPs with good dispersity has not been reported until now. Furthermore, the reaction rate of the gold particles is enhanced by one order of magnitude when supported on mesoporous titania compared to non‐porous titania. This significant improvement can be explained by an increase in the diffusivity of the substrate due to the presence of mesopores, the resistance to agglomeration, and improved oxygen activation.     

Bis‐clickable Mesoporous Silica Nanoparticles: Straightforward Preparation of Light‐Actuated Nanomachines for Controlled Drug Delivery with Active Targeting

Bis(clickable) mesoporous silica nanospheres (ca. 100 nm) were obtained by the co‐condensation of TEOS with variable amounts (2–5 % each) of two clickable organosilanes in the presence of CTAB. Such nanoparticles could be easily functionalized with two independent functions using the copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) reaction to transform them into nanomachines bearing cancer cell targeting ligands with the ability to deliver drugs on‐demand. The active targeting was made possible after anchoring folic acid by CuAAC click reaction, whereas the controlled delivery was performed by clicked azobenzene fragments. Indeed, the azobenzene groups are able to obstruct the pores of the nanoparticles in the dark whereas upon irradiation in the UV or in the blue range, their trans‐to‐cis photoisomerization provokes disorder in the pores, enabling the delivery of the cargo molecules. The on‐command delivery was proven in solution by dye release experiments, and in vitro by doxorubicin delivery. The added value of the folic acid ligand was clearly evidenced by the difference of cell killing induced by doxorubicin‐loaded nanoparticles under blue irradiation, depending on whether the particles featured the clicked folic acid ligand or not.