Design of scaffold-like metal-organic coordination polymers based on dinuclear zinc(<Emphasis Type="SmallCaps">II</Emphasis>) carboxylate complexes

Two new scaffold-like metal-organic coordination polymers, [Zn₂ndc₂bpe]·DMF and [Zn₂ndc₂dedpbp] ·4DMF (ndc is 2,6-naphthalenedicarboxylate, bpe is trans-bis(4-pyridyl)ethylene, and dedpbp is 4,4′-diethynyl-4″,4′″-dipyridylbiphenyl), were synthesized by heating stoichiometric amounts of zinc(II) nitrate, H₂ndc, and bpe or dedpbp in DMF. The structures of the polymers were established by X-ray diffraction. Coordination of linear dicarboxylate ligands to zinc cations gives rise to planar square-grid networks, and additional coordination of the bifunctional nitrogen-containing ligands results in the formation of scaffold-like triply interpenetrating structures with a primitive cubic topology. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 219–223, February, 2007.     

Selective solid-phase extraction of tebuconazole in biological and environmental samples using molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) were prepared by precipitation polymerization using tebuconazole (TBZ) as a template. Frontal chromatography and selectivity experiments were used to determine the binding capabilities and binding specificities of different MIPs. The polymer that had the highest binding selectivity and capability was used as the solid-phase extraction (SPE) sorbent for the direct extraction of TBZ from different biological and environmental samples (cabbage, pannage, shrimp, orange juice and tap water). The extraction protocol was optimized and the optimum conditions were: conditioning with 5 mL methanol:acetic acid (9:1), 5 mL methanol and 5 mL water respectively, loading with 5 mL aqueous samples, washing with 1.2 mL acetonitrile (ACN):phosphate buffer (5:5, pH3), and eluting with 3 mL methanol. The MIPs were able to selectively recognize, effectively trap and preconcentrate TBZ over a concentration range of 0.5–15 μmol/L. The intraday and interday RSDs were less than 9.7% and 8.6%, respectively. The limit of quantification was 0.1 μmol/L. Under optimum conditions, the MISPE recoveries of spiked cabbage, pannage, shrimp, orange juice and tap water were 62.3%, 75.8%, 71.6%, 89% and 93.9%, respectively. MISPE gave better HPLC separation efficiencies and higher recoveries than C18 SPE and strong cation exchange (SCX) SPE. Figure HPLC analysis of spiked pannage after MISPE (A) and after C18 SPE (B). HQ (1), E3 (2), p-NP (3), FTF (4), TBZ (5), PNZ (6), HXZ (7) Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Acid properties of semicrystalline zeolitic mesoporous UL-ZSM-5 materials

UL-ZSM-5 materials have been prepared by templated solid-state crystallization of zeolites starting from the amorphous mesostructured aluminosilicate Al-Meso. Microcalorimetry and FTIR have been employed to characterize their surface acidity. In good agreement with ²⁷Al MAS NMR data, UL-ZSM-5 displayed an improved density and strength of Brönsted acid sites, as compared to Al-Meso, owing to the incorporation of aluminium in a tetrahedral environment similar to that of zeolite ZSM-5. Moreover, they showed an enhanced Brönsted/Lewis relative acid ratio. However, Al-Meso showed the highest concentration of strong Lewis acid sites due to its largest amount of aluminium in extraframework positions.     

纳米TiO2-SnO2介孔材料的制备及其对含氰废水的光催化降解性能

以TiCl4和SnCl4为原料,采用直接水解常压液相反应合成出了纳米TiO2-SnO2复合介孔材料.利用XRD和TEM及漫反射谱等对样品进行了表征,并研究了纳米TiO2-SnO2复合介孔材料对含氰废水的光催化降解性能.结果表明,纳米TiO2与SnO2复合后,导致材料的光谱响应拓宽;此种催化剂在日光灯下比在紫外灯下对废水中CN-的降解效果要好.     

Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe₂O₃) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt₄BF₄ (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes.     

Electrochemical and quantum chemical investigation of the CuI and CuII complexes with biquinolyl monomer and polymer ligands

Structural reorganization of polyamide (PA) and low-molecular-weight Cu^I and Cu^II complexes with biquinolyl (biQ) ligands during their mutual redox transformations in solution was studied using the electrochemical methods (cyclic voltammetry and preparative electrolysis) and quantum chemical DFT calculations. The influence of electronic factors and geometry distortions in the complexes on the ionization energy on going from Cu^I to Cu^II was evaluated in comparison. The catalytically active form of the [Cu^I(PA)L₂]BF₄ complex can be synthesized in situ from the stable tetrahedral complex [Cu^I(PA)₂]BF₄ by the series of successive redox transitions Cu^I → Cu^II → Cu^I accompanied by the loss of one biQ-containing macroligand. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1331–1340, July, 2007.     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

KIT-1介孔分子筛的化学修饰及吸附性能

介孔分子筛MCM-41具有较大、可调的孔径和较高的比表面积，其骨架组成具有较强的可调变性．为该材料的应用提供了很大的空间。但全硅MCM-41分子筛在潮湿空气中，即使在室温条件下也会发生水解反应，使其介孔结构遭到破坏。前人已针对MCM-41分子筛稳定性不足的问题相继合成了稳定性较高的介孔分子筛KIT-1,     

纳米结构导电聚合物材料研究进展

具有纳米结构的导电聚合物因其诱人的应用前景越来越引起人们的重视。本文综述了聚苯胺、聚吡咯以及聚噻吩等导电聚合物的零维、一维、二维以及三维纳米结构的合成方法,并介绍了聚合物纳米结构的表征以及研究现状和应用前景。参考文献60篇。     

Preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds

Mesoporous materials have attracted considerable attention for use as a catalyst or a catalyst support due to their remarkable textural properties such as high surface area and large pore volume with a narrow pore size distribution. Many efforts have been made to design mesoporous materials for use in heterogeneous catalyst systems. Recent progress and results regarding the preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds were discussed in this review. Mesoporous materials were used as a support for nickel catalyst or a nickel-incorporated mesoporous catalytic material in this work. Two research areas were described and discussed in this review. One is the preparation of mesoporous alumina-supported nickel catalysts and their application to the hydrodechlorination of 1,2-dichloropropane and o-dichlorobenzene. The other is the preparation of mesoporous silica-supported nickel catalysts and their application to the hydrodechlorination of 1,1,2-trichloroethane and chlorobenzene.