Study on δ‐form complex in syndiotactic polystyrene–organic molecules systems. IV. Formation of complexes with a mixture of solvents and structural changes during the sorption of solvents by syndiotactic polystyrene mesophase membranes

The syndiotactic polystyrene (sPS) δ form was crystallized from mixtures with different compositions of p‐chlorotoluene–chlorobenzene (p‐CT–CB) and p‐chlorotoluene–1,1,2‐trichloroethane (p‐CT–TCE). The presence of the δ form and TTGG helical conformation was confirmed by Fourier transform infrared and wide‐angle X‐ray diffraction (WAXD) analyses. In sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes, the relative absorbance (RA) of the p‐chlorotoluene (p‐CT) solvent peak was very high even at very low concentrations of p‐CT in comparison with the RA of higher concentrations of chlorobenzene (CB) or 1,1,2‐trichloroethane (TCE) in the mixtures. However, the RAs of both CB and TCE solvent peaks decreased with decreasing concentrations of CB and TCE in the mixtures. A negligible decrease in the RA of the TTGG helical content was observed with a decreasing concentration of CB or TCE. The WAXD results showed that the 2θ peak positions of the [010] and [ 10] planes of the sPS/p‐CT–CB and sPS/p‐CT–TCE δ‐form membranes appeared in the same position and were almost equal to those of the sPS–p‐CT δ‐form membrane. The mesophases of the sPS–p‐CT [p‐CT (A‐M)] and sPS–TCE [TCE (A‐M)] membranes were used for the sorption studies with different concentrations of various solvents. The sorption amount of aromatic solvents by both p‐CT (A‐M) and TCE (A‐M) mesophase membranes was higher than that of aliphatic solvents, regardless of the size, shape, and nature of the molecular cavity. The 2θ peak of the [010] plane of the sPS membranes slowly approached the original δ‐form value when the sPS mesophase membranes were immersed in various solvents of different concentrations for 48 h. The shifting of the 2θ peak of the [010] plane to the original δ form depended on the nature and concentration of the immersion solvents. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2380–2387, 2005     

The thermorheological complexity of photoelastic behaviour of 2-hydroxyethyl methacrylate — dodecyl methacrylate copolymers

The viscoelastic photoelastic behaviour of networks of 2-hydroxyethyl methacrylate — dodecyl methacrylate (DMA) copolymers in the main transition and rubberlike region was investigated. With increasing DMA content, photoelastic functions are quickly shifted to lower temperatures or shorter times; a detailed course of the functions suggests heterogeneity of the copolymers. Due to the existence of long side chains, optical function of all samples change the sign from positive to negative with increasing temperature. While the temperature dependences of the moduli of copolymers can be described by the two-phase Takayanagi model, the temperature dependences of optical functions cannot be described by using this model. It has been found, however, that the tempeature and time dependences of photoelastic functions can be described semiquantitatively by a three-phase model with a hypothetical statistical copolymer as the third component. The high values of the volume fraction of the hypothetical statistical copolymer found for the individual samples, suggest a considerable miscibility and a strong influence of the interphase boundary on the photoelastic behaviour of the copolymers.     

Thermal behaviour of new N,N-dimethylbiguanide complexes having selective and effective antibacterial activity

The complexes of the type M(HDMBG)₂(CH₃COO)₂·nH₂O ((1) M:Mn, n=1.5; (2) M:Ni, n=0; (3) M:Cu, n=2; (4) M:Zn, n=2; DMBG: N,N-dimethylbiguanide) present in vitro antimicrobial activity. The thermal analysis has evidenced the thermal intervals of stability and also the thermodynamics effects that accompany them. The different nature of the ligands generates a different thermal behaviour for the complexes. The thermal transformations are complex processes according to TG and DTG curves including dehydration, oxidative condensation of –C=N– units as well as thermolysis processes. The final products of decomposition are the most stable metal oxides.     

Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.     

Retention behaviour of carboxylic acid methyl esters in supercritical fluid chromatography

The study on retention behavior in supercritical fluid chromatography (SFC) is necessary to understand the mechanism of the various interactions in SFC. The retention of SFC in carboxylic acid methyl ester/polymethylsiloxane/CO2 system was studied systematically and the retention behavior of this kind of compounds under various typical operation conditions was described using the method of an alternative unified theory of chromatographic retention. The results illustrated that expression: Ink.= a + b/T + cp + dp/T + ep2/T can be used to describe quantitatively the retention behavior of carboxylic acid methyl ester/polymethylsiloxane/CO2 system in the ranges of reduced density from 0.549 to 1.411. It was also found that the entropy of solute in stationary phase is dependent on the density of supercritical fluid (SF) under typical operating conditions of SFC.     

Effect of flame-sprayed Al–12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubes

Internal pressurization testing at room temperature was performed to evaluate the effect of flame-spraying aluminum-12silicon on the leakage behavior of fibre-reinforced composite tubes fabricated by filament winding, and covered with garnet sand. A group of specimens were completely coated with flame-sprayed metal particles and another set remained uncoated. t-tests were conducted at a significance level of α = 0.05 to analyze the effect of the coating on the leakage behavior of the specimens. Ultraviolet imaging was used to illustrate a characteristic leakage pattern of the composite tubes. Coated specimens exhibited slightly higher mean leakage and burst pressures than the uncoated specimens. The t-test results provided strong statistical evidence that the flame spraying process employed did not damage the filament wound tubes covered with garnet sand.     

On the liquid-crystalline properties of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens

In this article, we report on the synthesis and thermotropic behaviour of methacrylic polymers containing 4′-(4-alkyloxyphenyl)azobenzene mesogens attached to the backbone through n-alkyloxy spacers of 6 or 10 methylene groups. Polymerisations were carried out via free radicals using azobisisobutyronitrile (AIBN) as initiator. Chemical structures of polymers and their precursors were characterised by ¹H NMR spectroscopy. Thermogravimetric analysis showed that azopolymers are thermally stable up to temperatures around 300°C. The thermotropic liquid-crystalline (LC) behaviour was studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and X-ray diffraction (XRD). Results indicate that all synthesised mesogens, monomers and polymers developed two or more orthogonal LC phases in wide temperature ranges. Mesogens and monomers developed nematic and smectic phases, whereas polymers exhibited only smectic phase. In polymers, the arrangement of mesogens depends on the relative length of the spacer and the terminal flexible chain; two distinct structural models were proposed based on chemical interactions and steric constrains. The trans–cis photoisomerisation of monomers and polymers in solution was also studied. High cis-isomer contents (>80%) were reached in relative short irradiation times despite the steric constrains imposed by the polymer backbone.     

Conformational effects of 1,5,9-substitution in symmetric bicyclo[3.3.1]nonane analogues

The high-level ab initio calculations on several derivatives of bicyclo[3.3.1]nonane, 1-aza- and 1,5-diazabicyclo[3.3.1]-nonanes show the ‘double chair’ (CC) conformer as optimal for all of them, dominating over the ‘boat–chair’ (BC) form. Conformational effects of several substitution types involving positions 1, 5 and 9 are quantified, and their values are found rather transferable.     

Entire large solutions of semilinear equations involving the fractional Laplacian

We investigate the existence and nonexistence of positive entire large solutions of a class of semilinear equations involving the fractional Laplacian. Sharp lower and upper bounds of the minimal solution, if it exists, are also given.     

Attraction behaviour of Anagrus nilaparvatae to remote lemongrass (Cymbopogon distans) oil and its volatile compounds

Utilisation of Anagrus nilaparvatae is a promising and effective method for planthoppers manipulation. Twenty-seven components of remote lemongrass (Cymbopogon distans) oil were identified by GC/MS and nine volatiles were selected for behavioural experiments. In this study, we noted that the remote lemongrass oil was attractive to female A. nilaparvatae at concentrations of 0.1 and 1 mg/L. α-Pinene, β-pinene, eucalyptol, carveol and D-carvone attracted female wasps in the dose-dependent bioassays. Blend 1 (a mixture of eucalyptol, D-carvone, carveol, α-pinene, and β-pinene with ratios of remote lemongrass oil volatiles of 625:80:11:5:3) attracted female wasps at 10 mg/L, while blend 2 (a mixture of the same five volatiles at the same loading ratio) attracted them at 0.1 and 1 mg/L. These results suggested that plant essential oils could be attractants for natural enemies to control pests. The ratios of volatiles in the mixtures affect the attractiveness of the synthetic mixtures.