Axially Dissymmetric Chiral (R)‐N,W‐Bis(2‐hydroxy‐3,5‐ditert‐butyl‐arylmethyl)‐1, 1′‐binaphthalene‐2,2′‐diamine as Chiral Ligands in the Reaction of Diethylzinc to Aldehydes†

Chiral ligand (A)‐N,N′‐Bis(2‐hydroxy‐3,5‐di‐tert‐butyl‐arylmethyl)‐1,1′‐binaphthalene‐2,2′‐diamine derived from the reduction of Schiff base (R)‐2,2′‐bis (3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)‐1, 1′‐binaphthyl with LiAlH₄, is fairly effective in the asymmetric addition reaction of diethylzinc to aldehydes by which good yields (46%‐94%) of the corresponding sec‐alcohols can be obtained in moderate ee (51%‐79%) with R configuration for a variety of aldehydes.     

Synthesis and characterization of unsymmetrical benzonitrile‐containing polyimides: Viscosity‐lowering effect and dielectric properties

A new unsymmetrical diamine, 2‐(3‐aminophenoxy)‐6‐(4‐aminophenoxy)benzonitrile (3,4‐APBN), is synthesized via two consecutive S_NAr reactions and the temperature‐dependent reactivity of the fluorides in 2,6‐difluorobenzonitrile, whose first S_NAr reaction occurs at 70 °C and second, at 100 °C, allowing timing control of reaction sequence and circumventing the transetherification side reaction. Thus, a series of polyimides (PIs) is prepared from the polymerization of 3,4‐APBN with five common dianhydrides (6FDA, DSDA, OPDA, BTDA, and PMDA). For comparison, a second series is also prepared from two symmetrical diamines ([2,6‐bis(3‐aminophenoxy)benzonitrile (3,3‐APBN) and 2,6‐bis(4‐aminophenoxy)benzonitrile (4,4‐APBN)] and 6FDA or PMDA. The processability of the poly(amic acids) (PAAs), for the first series is greatly improved since their solution viscosities are much lower than PAAs based on symmetrical diamines. Besides having high glass‐transition temperatures (249–332 °C), and thermal stability [5% weight loss in the range of 505–542 °C (air) and 512–546 °C (nitrogen)], these PIs form tough, transparent and flexible films that have a tensile‐strength range of 82.1–121.3 MPa, elongations‐at‐break of 5.33–9.81%, and tensile moduli of 2.11–2.97 GPa. Their film dielectric constants are 3.08–3.62 at 10 kHz, moderately higher than that (2.92) of analogous PI (CP2) without nitrile groups. Overall, we found that the reduction of structural symmetry in repeat units can improve the polymer processibility as well as increasing their dielectric constants. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4998–5011     

RuCl_2[(S)-P-Phos]-[(S)-DAIPEN]催化芳香酮的不对称加氢反应

研究了钌-双膦-二胺配合物催化剂RuC1_2[(S)-P-Phos]-[(S)-DAIPEN][P-Phos:2,2',6,6'-四甲氧基-4,4'-双(二苯基膦基)-3,3'.二吡啶,DA肫N:1,1.二(4.甲氧苯基).2.异丙基.1,2.乙二胺]催化芳香酮不对称加氢反应的性能,考察了不同的碱、叔丁醇钾浓度、反应溶剂、底物/催化剂摩尔比等因素对反应活性和对映选择性的影响.在苯乙酮、叔丁醇钾、催化剂的摩尔比为1000:20:1,氢气压力为2 MPa,反应温度为30℃时,苯乙酮的转化率和α-苯乙醇的对映选择性(ee)分别达到了100%和88.5%,2'-溴苯乙醇的ee值町达97.1%.     

手性二胺的合成及其在催化不对称反应中的应用

手性二胺作为具有良好催化活性和对映选择性的手性配体或手性辅助剂, 在多种催化不对称反应中已经得到广泛应用, 并取到了很好的研究成果. 目前, 手性二胺化学的研究已成为催化不对称化学领域中一个十分活跃和引人注目的研究热点. 综述了手性二胺化学近几年的研究进展.     

固相反应合成丙二胺合钴氧合性能的研究

0引言氧载体是一类能够可逆吸收分子氧的特殊金属配合物。由于它在贮氧、除氧上有潜在的应用价值及对探索生命科学的重要意义,使得氧载体的研究得以广泛的展开[1~3],目前对氧载体氧合性能的影响因素研究局限于溶剂、温度、配体等因素的研究[4~6],而不同金属盐对氧载体氧合性能影响的探讨很少见于报道。作者在实验中发现,当使用不同阴离子的钴盐进行固相合成氧载体时,所得氧载体吸收分子氧的性能有明显差异。为探讨固相反应中不同钴盐对钴配合物氧合性能的影响,本文以丙二胺为配体,与四种不同钴盐分别发生液鄄固反应和气鄄固反应,再通过氧合…     

Complexation of rhodium(II) tetracarboxylates with aliphatic diamines in solution: 1H and 13C NMR and DFT investigations

The complexation of rhodium(II) tetraacetate, tetrakistrifluoroaceate and tetrakisoctanoate with a set of diamines (ethane‐1,diamine, propane‐1,3‐diamine and nonane‐1,9‐diamine) and their N,N′‐dimethyl and N,N,N′,N′‐tetramethyl derivatives in chloroform solution has been investigated by ¹H and ¹³C NMR spectroscopy and density functional theory (DFT) modelling. A combination of two bifunctional reagents, diamines and rhodium(II) tetracarboxylates, yielded insoluble coordination polymers as main products of complexation and various adducts in the solution, being in equilibrium with insoluble material. All diamines initially formed the 2 : 1 (blue), (1 : 1)_n oligomeric (red) and 1 : 2 (red) axial adducts in solution, depending on the reagents' molar ratio. Adducts of primary and secondary diamines decomposed in the presence of ligand excess, the former via unstable equatorial complexes. The complexation of secondary diamines slowed down the inversion at nitrogen atoms in NH(CH₃) functional groups and resulted in the formation of nitrogenous stereogenic centres, detectable by NMR. Axial adducts of tertiary diamines appeared to be relatively stable. The presence of long aliphatic chains in molecules (adducts of nonane‐1,9‐diamines or rhodium(II) tetrakisoctanoate) increased adduct solubility. Hypothetical structures of the equatorial adduct of rhodium(II) tetraacetate with ethane‐1,2‐diamine and their NMR parameters were explored by means of DFT calculations. Copyright © 2013 John Wiley & Sons, Ltd.     

新型磺酰胺类含氮手性配体的合成,晶体结构及催化苯乙？…

近年来 ,手性含氮配体在不对称催化反应中的应用已受到广泛关注 .迄今应用较多的是含氮双齿Ｓｃｈｅｍｅ 1　Ｓｙｎｔｈｅｓｉｓｏｆｃｈｉｒａｌｌｉｇａｎｄ或三齿配体[13],含氮四齿配体的研究相对较少 .尹承烈[4 ]报道了手性联萘二胺与 2 吡啶基甲醛形成的Ｓｃｈｉｆｆ碱类四齿含氮配体 .本文由 ( +) ( 1Ｒ ,2Ｒ) 二苯基乙二胺与 8 喹啉磺酰氯制得新的含氮四齿配体 ,并得到晶体结构 .该配体对Ｉｒ(Ⅰ )催化苯乙酮的不对称氢转移反应 ,具有较好的光学诱导作用 .配体的合成及不对称氢转移反应如Ｓｃｈｅｍｅ1所示 .1　实验部分Ｂｕｃｈ…     

Synthesis,spectral characterization,thermal study and antimicrobial activity of (E)-4-(substituted 1-Benzo[d]imidazole-2-yl)-N'-(substituted Benzylidene)benzohydrazide schiff bases

Antimicrobial properties casing wide applicability in water detoxification, pharmaceutics and in industries. Present work focus on the synthesis of a new series of Schiff Bases (E)-4-(1 substituted-1H Benzo[d]imidazole-2-yl)-N'-(substituted Benzylidene)benzohydrazide (5a-5l) were synthesized. The convenient route for the synthesis of new analogues by the condensation of 4-(substituted -1H-Benzo[d]imidazole-2-yl)-N'- Hydrazine with different derivatives of aromatic aldehydes were described using different solvents and catalysts. The structures of the synthesized compounds were ascertain by spectral techniques viz. IR, ¹H NMR, MS and Physical Elemental data. Compounds were also subjected to thermal analysis to study their physical and chemical properties. The title compounds were also screened for their antimicrobial activity against various bacterial & Fungal strains. Results of bioassay vary with diverse group attached to Benzimdazole motif and could be helpful for the development of other bioactive molecules.     

A Facile and Efficient Synthesis of Arylsulfonamido‐Substituted 1,5‐Benzodiazepines and N‐[2‐(3‐Benzoylthioureido)aryl]‐3‐oxobutanamide Derivatives

A facile and efficient synthesis of 1,5‐benzodiazepines with an arylsulfonamido substituent at C(3) is described. 1,5‐Benzodiazepine, derived from the condensation of benzene‐1,2‐diamine and diketene, reacts with an arylsulfonyl isocyanate via an enamine intermediate to produce the title compounds of potential synthetic and pharmacological interest in good yields (Scheme 1). In addition, reaction of benzene‐1,2‐diamine and diketene in the presence of benzoyl isothiocyanate leads to N‐[2‐(3‐benzoylthioureido)aryl]‐3‐oxobutanamide derivatives (Scheme 2). This reaction proceeds via an imine intermediate and ring opening of diazepine. The structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this type of cyclization is proposed (Scheme 3).     

Multivariate approach for the enantioselective analysis in MEKC‐MS: II. Optimization of 1,1′‐binaphthyl‐2,2′‐diamine in positive ion mode

Enantiomeric separation and detection of 1,1′‐binaphthyl‐2,2′‐diamine (BNA) has been successfully optimized by MEKC‐ESI‐MS using a polymeric surfactant polysodium N‐undecenoxycarbonyl‐L‐leucinate (poly‐L‐SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five‐factor three‐level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH₄OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3‐D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.