树枝状多氨基环氧树脂固化剂的合成及其固化行为

树枝状多氨基环氧树脂固化剂的合成及其固化行为;树枝状大分子;丙烯酸酯双键;乙二胺(EDA)     

An optimized preparation of bismaleimide–diamine co‐polymer matrices

The main aim of this study was to develop an improved method for the preparation of a bismaleimide–diamine (BMI/DDM) polymer matrix, achieving shorter curing time, longer processing time (pot life), and good thermal mechanical properties. A matrix of BMI/DDM thermoset was prepared at optimal conditions and formulation, containing BMI and DDM in a 2:1 mol ratio with 0.1 wt% of dicumyl peroxide (DCP) as the curing accelerator. An optimal temperature of 150°C was selected for both melt‐mixing and curing processes. The mechanism of matrix preparation was also investigated using differential scanning calorimetry and quantitative Fourier transformed infrared analysis. DCP at the optimal concentration was found to accelerate cross‐linking reactions between BMI and DDM without inhibiting the chain‐extension reaction of BMI. The specified formulation exhibited longer gel time (208 s/g) and shorter post‐curing time (2 h) compared to other formulations. In addition, thermomechanical behavior and thermal stability were analyzed by dynamic mechanical analysis and thermomechanical analysis, and thermogravimetric analysis, respectively. The storage modulus (E′), glass transition temperature (T_g), and decomposition temperature (T_d) of the BMI/DDM thermosets increased with the BMI content of the formulations, while the coefficient of thermal expansion and damping behavior (tan δ) decreased in a similar manner, primarily because of an increase in the degree of cross‐linking. Copyright © 2014 John Wiley & Sons, Ltd.     

Investigation on thermal conductivity and physical properties of polythiophene/p-phenylenediamine-graphene oxide and polythiophene-co-poly(methyl methacrylate)/p-phenylenediamine graphene oxide composites

An efficient approach was employed to simultaneously functionalize and reduce the graphene oxide (GO) with p-phenylene diamine (PPD) using simple refluxing. There was a possibility of nucleophilic substitution of amino moieties of PPD with the epoxy groups of GO. The polythiophene (PTh) and polythiophene-co-poly(methylmethacrylate) (PTh-co-PMMA) nanocomposites with chemically modified GO were prepared using in situ polymerization technique. Two series of nanocomposites that is PTh/PPD-GO and PTh-co-PMMA/PPD-GO were designed. The nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, scanning electron microscopy (SEM), thermal conductivity, and electrical conductivity measurement. The FTIR spectra depicted the characteristic absorption peaks for the formation of copolymer and their composites with PPD-GO. The SEM micrographs showed that the PPD-GO nanosheets were homogeneously dispersed in copolymer matrix forming nano-granular morphology. The nanofluids were prepared by suspending modified GO particles inside the basefluid of polythiophene and PTh-co-PMMA. The thermal conductivity of nanocomposites was significantly improved even with low PPD-GO loading. The thermal conductivity of PTh-co-PMMA/PPD-GO with 1.5 wt.% filler was increased to 1.42 W/mK at a higher temperature. The XRD patterns confirmed the presence of chemical interactions between the copolymer and filler particles. The electrical conductivity of PTh-co-PMMA/PPD-GO was also found to increase in the range of 6.1 × 10^?3–2.5 × 10^?2 S/cm. Novel PTh-co-PMMA/PPD-GO-based nanocomposite is potentially significant in high-performance thermal systems.     

Synthesis and properties of polyimides derived from bis-(Aminophenoxy) containing naphthalene, [Phenyl] propane and [Methyl] cyclohexane segment and 4, 4′-carbonyldiphthalic anhydride

ABSTRACT

Three wholly, semi aromatic and aliphatic-aromatic polyimides containing bis(phenoxy) naphthalene, bis[(phenoxy) phenyl] propane and bis(phenoxy-methyl) cyclohexane segments by the two-step procedure from 2, 7-bis(4-aminophenoxy) naphthalene (BAPON), 2, 2-bis[4-(4-aminophenoxy)phenyl]propane (BAPOP), 1, 4-bis (4-aminophenoxy methyl) cyclohexane (BAPMC) as a diamine and 4,4′-carbonyldiphthalic anhydride (CDPA) were prepared. The first step of this procedure including ring-opening polyaddition in a polar solvent to give poly(amic-acid)s, second step containing cyclodehydration reaction to form polyimides. Synthesized monomer and polyimides were characterized by FT-IR, ¹H NMR spectroscopy and elemental analyses (CHN) that obtained results gave the most powerful evidence. The polyimide synthesized from BAPON was characterized as semi-crystalline, whereas the other polyimides showed amorphous patterns by the x-ray diffraction studies. The inherent viscosity was ranging between 0.87–1.01 dL/g. Tensile strength, initial moduli, and elongation at break of the polyimide films ranged from 88–117 MPa, 1.98–2.32 GPa, and 5–8%, respectively. Thermogravimetric analysis in nitrogen atmosphere shows that these polymers having good stability, so 10% weight will be lost in the range of 500–630°C. The point of polyimide with BAPMC segment, is “adding of good thermal stability and processability” lower moisture absorption and dielectric constant (0.75% and 2.90).     

离子色谱法测定纺织浆料中痕量N-(2-羟乙基)乙二胺

应用离子色谱法测定了纺织浆料中痕量的N-(2-羟乙基)乙二胺(HEEDA)。样品(1.0g)加水定容至25mL并超声分散40min,离心分离,取上清液,经过滤后再通过OnGuard RP柱除去其中的芳香染料等大分子有机物后,进样25μL,经Ionpac CS17阳离子交换柱,并用8mmol·L-1硫酸溶液作为流动相进行分离。用抑制电导检测器检测。HEEDA的质量浓度在0.1~100mg·L-1范围内与其峰面积值呈线性关系,检出限(3S/N)为0.025mg·L-1。按试验方法对50mg·L-1 HEEDA标准溶液重复5次测定,测定值的相对标准偏差为0.71%。以两个阳性样品作基体,用标准加入法进行回收试验,测得回收率在95.4%~104%之间。     

Synthesis and characterization of some new aromatic diamine monomers from oxidative coupling of anilines and substituted aniline with 4-amino-N,N-dimethyl aniline

New aromatic diamine monomers prepared from condensation reactions of aniline, p-chloroaniline, p-nitro aniline, p-chloro-m-nitro aniline with 4-amino-N,N-dimethylaniline (2:1) (aniline:reagent) in the presence of potassium dichromate in acidic media yielded new monomers of a highly colored violet and reddish-violet. Mechanism of the reaction of aniline with 4-amino-N,N-dimethylaniline in the presence of potassium dichromate as an oxidant is expected to proceed through nucleophilic substitution reaction, and the mechanism proceeds facilitated a nucleophilic attack of the substituted aniline ring on the –NH₂ group of the reagent; through partial protonation of their –NH₂ group, forming in diamine dye and their identification was confirmed by IR, ¹H NMR, and CHN analyses.     

Determination Limit of Fluorescence Turn‐On Probes for the Acetate Anion

Three fluorescent turn‐on probes containing 3,6‐dichloro‐9H‐carbazole as carbazyl part have been designed and synthesized. Among studied anions F^?, AcO^?, H₂PO , Cl^?, Br^? and I^?, AcO^? showed the strongest binding ability with all probes. The strong basic anions, such as AcO^?, H₂PO , and F^?, induced a significant red‐shift in absorption and a concomitant increase in fluorescent emission of the probes caused by photoinduced electron transfer (PET). The determination limit of probe 3 (Scheme 1) toward AcO^? is 3.0×10^?7 M . ¹H‐NMR Titration experiments shed light on the nature of the interaction between the probes and the anions. Theoretical investigation further illustrated the possible binding mode in these host? guest interactions and the roles of molecular frontier orbitals in molecular interplay.     

Solvothermal Syntheses of (H_2en)_2Sn_2S_6·en and[(H_2hmda)_3(Hhmda)_2](Sn_2S_6)_2Using SnCl_4 and S_8 as Starting Materials

1 INTRODUCTION Since Bedard et al. reported microporous tin(IV) sulfides synthesized by hydrothermal method in the presence of organic amine in 1989[1, 2], a number of thiostannates have been synthesized using hydro- or solvothermal techniques with organic amines as tem- plates. The structures of the resulting tin(IV) sulfi- des are related to the types of organic amines. Two- dimensional polyanions of the types of [Sn3S7]2- and [Sn4S9]2-, which are denoted as SnS-1 and SnS-3, respe…     

Structure‐property relationships for a series of amorphous partially aliphatic polyimides

High molecular weight, soluble, amorphous, partially aliphatic polyimides were successfully synthesized using an ester acid high‐temperature solution imidization route, which allows one to control desired glass‐transition (T_g) and processing temperatures. This method involves the prereaction of aromatic dianhydrides with ethanol and a tertiary amine catalyst to form ester acids, followed by the addition of diamines. Subsequent thermal reaction forms fully cyclized polyimides. This reaction pathway eliminates the need for anhydrous solvents and overcomes the problem of salt formation commonly observed for nucleophilic, more‐basic aliphatic amines when utilizing the traditional polyamic acid synthesis route. The molar ratio of aromatic‐to‐aliphatic diamines was varied to generate a series of copolyimides with the chosen dianhydride and tailor the physical properties for specific adhesive applications. This series of copolyimides was characterized by their molecular weight, T_g, thermal stability, coefficient of thermal expansion, refractive index, and dielectric constant. Structure‐property relationships were established. The γ and β sub‐T_g viscoelastic properties were researched to understand their molecular origins. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1503–1512, 2002     

离子迁移谱定量检测复杂基质中新型炸药六亚甲基三过氧化二胺

六亚甲基三过氧化二胺( Hexamethylene triperoxide diamine, HMTD)是一种新型有机过氧化爆炸物,由于原料易得、制备方法简单,常被用于恐怖袭击和犯罪活动中。本实验基于非放射性电离源真空紫外灯( VUV)发展了一种试剂分子辅助灯电离正离子迁移谱技术,通过优化筛选试剂分子,最终选择丙酮作为HMTD定量检测的试剂分子。利用质谱对丙酮的反应试剂离子和HMTD的产物离子进行了离子归属,确定反应试剂离子为丙酮二聚体离子 m/z 117[( CH3)2 CO ]2 H+, HMTD 的产物离子为其质子化的分子离子m/z 209[ HMTD+H]+。在迁移管和热解析温度120℃的条件下,利用HMTD最大信号强度和第10 s的信号强度对其标准样品进行定量检测,线性范围分别为5~50 ng/μL和5~100 ng/μL,检出限分别可达0.2和0.3 ng/μL。化妆品如香水等常常干扰和抑制离子迁移谱测量,发展在香水基质中HMTD的现场快速筛查和检测方法具有现实意义。将这两种定量方法应用于3种不同品牌香水样品中HMTD的定量检测,对比发现利用HMTD第10 s的信号强度进行定量具有较好的回收率和准确性,该方法适用于复杂基质中HMTD的准确快速定量检测。