密度泛函理论研究碳链长度对氯化三烷基铵萃取氯化汞的影响

运用密度泛函理论方法研究了烷基碳链长度对氯化三烷基铵络合氯化汞的影响,计算结果表明,氯化三烷基铵与氯化汞的络合作用随着氯化三烷基铵中烷基碳链的增长而增强.通过对络合物的键长、Mayer键级和Mulliken电荷分析可知,电子富集在氯化三烷基铵的Cl原子上,并和Hg原子之间形成静电吸引作用.当烷基长度小于3时,烷基的电子效应影响较为明显,增强了原子之间的电子转移,使得络合物更稳定;当氯化三烷基铵烷基碳链长度大于3后,烷基链长对络合物中的电子转移不再有影响,络合物的稳定性受到烷基的几何效应影响更为明显.     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

Intramolecular electrophilic rearrangements in saturated acyclic systems. Reactivity of the zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate with respect to different types of electrophiles

The reactions of the zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate with mercuric chloride and aryl isothiocyanates containing Cl atoms in the ortho positions of the benzene ring follow an unusual pathway because this zwitterion represents latent triisopropylphosphine due to the reversibility of the reaction of triisopropylphosphine with ethyl 2-cyanoacrylate. The molecular structures of the adducts of triisopropylphosphine with 2,6-dichloro- and 2,4,6-trichlorophenyl isothiocyanates were confirmed by X-ray diffraction study. Protonation of the adduct of triisopropylphosphine with 2,6-dichlorophenyl isothiocyanate occurred at the nitrogen atom, whereas methylation with methyl trifluoromethanesulfonate afforded an S-methylation product. The results of X-ray diffraction study of the resulting compounds are presented.     

Electrode kinetics of Eu3+/Eu2+ reaction by cyclic voltammetry

The cyclic voltammetric behaviour of Eu³⁺/Eu²⁺ couple at hanging mercury drop electrode (HMDE) has been studied in chloride, bromide, iodide, thiocyanate and EDTA supporting electrolytes. The apparent rate constant and transfer coefficient for these systems have been calculated at various voltage scan rates, without using the data for standard or formal potential. The values have been compared with those obtained by earlier workers through other electrochemical methods.     

基于吸收系数的生脉注射液中聚山梨酯80含量测定新方法

聚山梨酯80又名吐温80，为一种亲水型非离子表面活性剂，是食品、保健品和药品中常用的辅料，作为增溶剂和澄清剂广泛用于中药注射剂。近年来，不良反应的发生使得聚山梨酯80的质量和应用愈加受到重视，有研究认为其加入可能引起注射剂不良反应增加。为避免超量使用，有必要对该辅料的投料加以严格控制。中药注射剂中聚山梨酯80的含量测定是当下研究的热点和难点，可以通过分光光度法、分子排阻-蒸发光散射检测法(SEC-ELSD)、液质联用法(LC-MS)直接测定，也可以水解后法经液相色谱-紫外检测法(HPLC-UV)或气相色谱法(GC)间接测定。但由于聚山梨酯80为聚氧乙烯聚合数目不同的混合物、不同厂家生产的聚山梨酯80化学组分及比例存在较大差异，难以采用统一的转换公式或对照品准确定量。此外，中药注射剂的复杂基质造成的假阳性干扰也对定量提出了挑战。为解决以上问题，以生脉注射液为例，提出基于吸收系数的中药注射剂中聚山梨酯80含量测定新方法。优化检测波长、显色剂种类、液液萃取过程振荡和静置时间，在6个不同品牌仪器上测得聚山梨酯80-硫氰酸钴配合物的吸收系数(E1%_{1 cm})为104.23，相对标准偏差(RSD)为2.08%。生脉注射液稀释10倍后，精密量取供试品溶液1.0 mL，精密加入硫氰酸钴溶液10 mL，二氯甲烷20 mL，涡旋振荡3 min。将混合液移至分液漏斗中，静置30 min，取下层二氯甲烷液，将前1 mL弃去，接收约15 mL，在320 nm处测定吸光度，再根据Lambert-Beer定律，利用获得的吸收系数计算得到聚山梨酯80的含量。方法阴性无干扰，精密度和重复性相对标准偏差均低于3%，平均回收率为98.42%。为进一步验证方法的准确性，分别采用吸收系数法和标准曲线法测定了2个厂家的10批生脉注射液，并与实际投料量比较。配对t检验结果表明，当置信度为95%时，两种方法无显著性差异，吸收系数法测得结果与企业生产中聚山梨酯的实际投料量也无显著性差异。研究采用前人未采用的、灵敏度更高的320 nm为检测波长，显著降低了基质干扰，克服了中药注射剂中聚山梨酯80测定结果与实际投料量难以吻合的问题。吸收系数法无需使用对照品，亦不用制备标准曲线，可为中药注射剂中聚山梨酯80的检查标准提供切实可行的解决方案。所建方法灵敏、准确、快速、简便，为含聚山梨酯80制剂的质量控制提供了关键常数及新的思路。     

One‐ to Three‐Dimensional CuI and CuCN Based Coordination Polymers containing the Alkali Cation Ligating Thiacrown Ether 1, 10‐Dithia‐18‐Crown‐6

Treatment of an acetonitrile solution of CuI with 1, 10‐dithia‐18‐crown‐6 (1, 10DT18C6) in the presence of Rb₂CO₃ leads to formation of the lamellar coordination polymer [Rb{Cu₄I₅(1, 10DT18C6)₂}] ( 1 ).The anionic network of 1 is composed of parallel [(Cu₄I₅)^—] chains linked by bridging thiacrown ether ligands, pairs of which coordinate the Rb⁺ counter cations. [Cs{Cu₅I₆(1, 10DT18C6)₂}] ( 2 ) can be prepared under similar conditions but contains separated helical anionic chains. In this case 1, 10DT18C6 ligands bridge copper atoms of individual chains in an intrastrand manner. In contrast the coordination networks in [(CuCN)₂(1, 10DT18C6)] ( 3 ) and [K₂{Cu₁₂(CN)₁₄(1, 10DT18C6)₃} · CH₃CN] ( 4 ) are both three‐dimensional and based on CuCN‐containing sheets bridged by 1, 10DT18C6 ligands. In the latter compound pairs of K⁺ cations are coordinated by groups of three thiacrown ether molecules. The neutral network of 3 can imbibe up to 31 % KNO₃ per 1, 10DT18C6 pair without loss of lattice integrity.     

Alkali Cation Ligating Chains and Sheets of the Macrocycle 1, 7‐Dithia‐18‐Crown‐6 with Bridging Iodo‐ and Thiocyanatocuprate(I) Units

Treatment of an acetonitrile solution of CuI with 1, 7‐dithia‐18‐crown‐6 (1, 7‐DT18C6) at 100°C affords the coordination polymer ¹[(CuI)₂(1, 7‐DT18C6)₂] ( 1 ) in which 1, 7‐DT18C6 ligands bridge (CuI)₂ rings into double chains. 1D polymers of the type ¹[M{(Cu₃I₄)(1, 7‐DT18C6)}] (M = K, 2 ; M = Cs, 3 ) can be isolated under similar conditions in the presence of respectively KI and CsI. Both contain bridging heptacyclic [Cu₆I₈]^2— units but crystallise in different space groups, namely P1 and C2/m. The cesium cation of 3 is markedly displaced from the best plane through the thiacrown ether donor atoms. Reaction of 1, 7‐DT18C6 with CuSCN in the presence of NaSCN yields ²[{Na(CH₃CN)₂} {(CuSCN)₂(1, 7‐DT18C6)}][Cu(SCN)₂] ( 4 ), in which ¹[(CuSCN)₂] double chains are linked through macrocycles into sheets. Infinite ¹[{Cu(SCN)₂}^—] chains compensate the charge of the Na⁺ cations. Complex 1 can imbibe 0.90 mol CsNO₃ per mol of 1, 7‐DT18C6 pairs.     

Bestimmung Von Molybdän Nach Extraction Mit O,O,S - Triäthyldithiophosphat

Abstract

The interaction of molybdenum(V) with potassium thiocyanate in a medium of O,O,S-triethyldithiophosphate [(C₂H₅O)₂P(S)SC₂H₅] and ethanol at a ratio 4:1 has been studied.

The stability constant of the molybdenum(V) thiocyanate complex was determined to be 7.6 × 10² with a molar ratio Mo(v) : SCN of 1:1. A new method based on the formation of the molybdenum-thiocyanate complex in the organic phase has been developed for the determination of molybdenum in steel.     

Evaluation and applications of a gaseous mercuric chloride source

In this study, a diffusion-type device for generating gaseous mercuric chloride (HgCl₂) was systematically evaluated and applied to validate the annular denuder method for sampling gaseous HgCl₂ species in a synthetic gas stream. The results show that it takes at least 48 h for the system to reach a steady-state condition after the diffusion cell reaches the temperature set-point and the carrier gas is activated. The primary Hg species from the source was proven to be HgCl₂. In the temperature range from –5.00 to 11.80 °C, the Hg emission rates from the source vary from 1.8 to 14.2 pg min^–1. It is shown that, under the experimental conditions examined, KCl-coated annular quartz denuders designed for ambient reactive gaseous mercury (RGM) collection could quantitatively collect HgCl₂. It is also demonstrated that the impactors used to remove coarse airborne particulate matter could lead to a loss of up to one third of the HgCl₂ in the gas stream.