多柱色谱技术进展

在色谱分析过程中，利用串联、并联或串并联结合的方式将多根色谱柱组合起来，可以实现高通量和高分辨的分离效果。相比于传统单柱色谱技术，多柱技术很好地满足了批量样品分析和复杂生物样品分离分析的需求，因此引起了广泛关注。该文对多柱技术在多维分离、芯片色谱、毛细管电泳、固定相筛选以及串联色谱等领域的应用进行了综述，并对其发展前景进行了展望。     

乙烯-甲基丙烯酸共聚物离聚体在聚对苯二甲酸乙二酯中的相分离行为

聚对苯二甲酸乙二酯(PET)结晶速度很慢,通常加入成核剂来提高结晶速度。从专利文献来看,以离子聚合物为成核剂的例子也是很多的。离子聚合物与小分子成核剂的显著差别是:离子聚合物有一个很长的碳氢主链,其侧基为酸基,酸基被部分或全部地中和成盐。很明显,离子聚合物不象小分子成核剂那样能很好地分散在PET基体中,而是以独立的相存在。作为PET体系系列研究的继续,本文报道了离子聚合物Surlyn在PET中的相分离行为。     

聚醚氨酯的红外酰胺Ⅰ.谱带分析

通过对聚醚氨酯红外光谱酰胺-Ⅰ谱带的二级微商及傅里埃自解卷积处理,发现了位于1715cm~(-1)的新组分并可归属于无序的相间界面。应用差减光谱及曲线拟合对热处理试样的光谱谱带进行分析表明聚醚氨酯的加热/冷却过程是与可逆的无序/有序化过程及微相混合/分离过程有关的。新发现的1715cm(-1)组分强度的变化与无序/有序化过程是一致的。     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

主链含硅聚芳酯的合成及气体透过性能的研究

以双［对－酰氯苯基］二甲基硅烷和酚酞、四溴酚酞以及双酚Ａ为原料，合成了三种主链含硅聚芳酯，并对聚合物相关的物理性质进行了表征，制成了均质透明的薄膜．采用低真空法测定这些聚合物对Ｈ２、Ｏ２、Ｎ２、ＣＯ２、ＣＨ４的气体透过速率，并计算出气体透过系数、扩散系数、溶解系数、分离系数．从气体透过性能与聚合物分子结构关系的角度，按照气体透过的溶解－扩散机制，对聚合物的气体透过性能进行了研究，而且着重讨论了聚合物的堆积密度对气体扩散系数的影响，以及聚合物主链中极性链段的百分含量对气体溶解系数和溶解选择性的影响。     

使用二元环糊精体系毛细管电泳法分离手性药物

采用高效毛细管区带电泳法，分别以羟丙基-β-环糊精（HP-β-CD）和高磺化-β-环糊精（HS-β-CD）及二者混合物为手性选择剂，研究了5种药物的对映体分离，并取得很好的对映体分离结果。比较了HP-β-CD和HS-β-CD手性识别能力，分析了二元环糊精体系的“协同效应”。     

以交联聚乙烯醇为载体的离子交换剂对蛋白质的分离性能

本文对阴离子交换剂ＤＥＡ—ＰＶＴ常压液相离子交换色谱分离蛋白质的性能、分离条件进行了探讨。结果表明其对蛋白质的分离性能良好，容易洗脱。与载体交联聚乙烯醇相比，ＤＥＡ—ＰＶＴ对蛋白质的非特异性吸附明显降低。     

功能液晶膜的新进展

论述了功能液晶膜的新近研究结果和发展动向,指出功能液晶膜具有优异的气体分离、液体分离和电光性能,可望作为高效气体分离膜、高效液体分离膜和大面积光控膜,具有较重大的理论与实际意义。     

Characterization and separation of Al13 species using gel-filtration chromatography

A polyaluminum chloride (PAC) sample was prepared using a slow alkaline titration method. The Bio-Gel P-100 gel column chromatographic technique was used to separate and characterize the various forms of aluminum present in the prepared PAC solution. The effluents from a gel column were monitored using online chemical method: Al-Ferron timed complexation spectrophotometry and by ²⁷Al nuclear magnetic resonance (NMR) spectroscopy. Effects of different experimental conditions such as eluent flow rate, ionic strength and pH on separation of Al₁₃ were investigated. Experimental results indicated that molecule size exclusion was not the only parameter affecting the column chromatographic separation efficiency of Al₁₃ but molecule charge as well. Reducing the eluent flow rate, increasing the ionic strength and suitable pH resulted in increase in the separation efficiency. Experimental results clearly indicated that by varying the experimental conditions, it is possible to produce pure Al₁₃ species using a gel column chromatographic technique.     

Covalent chemistry and conformational dynamics of topologically chiral amide-based molecular knots

The readily available in gram quantities tris(allyloxy)knot of the amide-type 5 (knotane) can be completely and partially deprotected with nBu(3)SnH in the presence of a palladium catalyst resulting in hydroxyknotanes 7-9. These, in turn, react with diethylchlorophosphate giving rise to knotanes equipped with between one and three phosphoryl groups. Sulfonylation of bis(allyloxy)monohydroxyknotane 8 with p-toluenesulfonyl chloride and, following removal of one or two allyl groups from the intermediate monosulfonate 13, give rise to sulfonyloxy-allyloxy-hydroxy- and sulfonyloxy-dihydroxy-knotanes 15 and 14, respectively. This provides a convenient method for the preparation of knotanes with any substitution pattern. All new knotanes have been isolated in preparative amounts and as highly pure substances with an exception of allyloxy-dihydroxyknotane 9. This compound could only be obtained as a mixture with the corresponding monohydroxy-derivative 8. The structures of all synthesized compounds were established by means of FAB and MALDI TOF mass spectrometry, (1)H and (31)P NMR spectroscopy. The triphosphorylated knotane 10 exhibits high solubility in alcohols, allowing its complete enantiomeric resolution with a commercially available chiral HPLC column. (1)H,(1)H DQF-COSY correlation spectroscopy along with H/D exchange experiments and ab initio calculations provided the first detailed (1)H NMR signal assignments of knotanes in [D(6)]DMSO solution. The combination of variable temperature (1)H and (31)P NMR spectroscopy and molecular modeling has been applied to study the conformational behavior of the new knotanes in different solvents. It has been shown that in DMSO solution at room temperature knotanes exist in a relatively rigid nonsymmetrical conformation similar to that found in the solid state while faster conformational exchange leading to the average D(3) symmetrical structure was detected in a number of other solvents.