一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

Effect of conformational rigidity on the glass transition and initial decomposition temperatures of polyimides

The dependence of the glass transition and initial decomposition temperatures of polyperyleneimide and polynaphthylimide on the conformational rigidity was studied by the Monte Carlo, Kuhn segment, and quantum chemical AM1 methods. The corresponding linear plots can be used for estimation of the glass transition and initial decomposition temperatures when experimental determination is difficult.     

Contributions on the Properties of Titanates with Ilmenite Structure. IV. The effect of an order-disorder transition on the high temperature electrical conductivity of NiTiO3

NiTiO₃ shows an order-disorder transition from an ordered ilmenite structure to a corundum structure at high temperatures. The transition is followed by a strong increase of the specific electrical conductivity. The conductivity was investigated as a function of temperature and oxygen activity. An order parameter according to common phase transition theories can be used to describe the behaviour of the conductivity in the transition region and vice versa. A model for the defect structure of NiTiO₃ is presented.     

某些有机物在氧化物载体表面的自发单层分散

自发单层分散原理已在载负型催化剂制备、再生等方面得到越来越广泛的应用[1，2]．许多氧化物和盐类可以在载体表面形成单层分散或亚单层分散．有些分散物与载体混合后在低于其熔点的温度下处理，就可以自发分散到载体表面[1，3]．这一现象通过XRD、LRS、XPS、SIMS、ISS、EXAFS     

Synthesis and properties of liquid crystalline polyurethanes

1,4-Bis(p-hydroxybenzoate)phenylene was prepared using 1,4-bis(trimethylsiloxy)benzene and p-hydroxybenzoyl chloride as starting materials. A series of novel 1,4-bis(p-hydroxyalkoxybenzoate)phenylene were synthesized by reaction of 1,4-bis(p-hydroxybenzoate) phenylene with 3-brompropanol and 4-bromobutanol, respectively. The liquid crystal polyurethanes were prepared by 1,4-bis(p-hydroxyalkoxybenzoate)phenylene with MDI (p-methylene diphenylenediisocyanate) and 2,4-TDI(2,4-toluenediisocyanate), respectively. The thermotropic properties, the melting point (T _m) and the isotropization temperature (T _i) of the synthesized polyurethanes were characterized by DSC, IR and POM. It showed that all of the polyurethane polymers exhibited thermotropic liquid crystalline properties between 144°C and 260°C. The transition temperature (T _m and T _i) decreased with an increase in the length of the methylene spacer. __________ Translated from Journal of Qingdao University of Science and Technology, 2006, 27(1) (in Chinese)     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Statistical experimental design-driven discovery of room-temperature conditions for palladium-catalyzed cyanation of aryl bromides

A combination of Pd₂(dba)₃·CHCl₃ (0.5 mol %) and commercially available, air-stable phosphonium salt [(t-Bu)₃PH]BF₄ (1.4 mol %) in a presence of Zn powder and Zn(CN)₂ as the cyanide source comprises an extremely efficient catalyst system for the cyanation of a diverse array of aryl bromides, at room temperature. This result emerged from an experimental strategy that combines the advantages of parallel, automated experimentation with the design of experiments (DOE) for the effective definition of an optimal set of reaction conditions.     

Effect of temperature on the mechanism of retention of fullerenes in liquid chromatography using various alkyl bonded stationary phases

Summary The temperature-dependency of the separation of fullerenes in liquid chromatography (LC) has been examined using various alkyl bonded stationary phases. It has been found that a maximum retention temperature exists with long alkyl bonded stationary phases, whereas there is no similar effect with the newly synthesized alkyl bonded phases which have two phenyl groups at the base of the bonded phase. The interpretation of the retention behavior of fullerenes in the low temperature region on alkyl bonded stationary phases is discussed using information obtained by CP-MAS solid-state NMR spectroscopy and LC.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

苯乙烯-丁二烯-苯乙烯/聚乙烯基甲基醚共混体系相容性的FT-IR及DSC研究

嵌段高聚物、均聚物共混体系相容性是近年来研究的热点。本工作以光学显微镜、DSC、FT-IR为手段,研究了三嵌段高聚物苯乙烯-丁二烯-苯乙烯(SBS);SBS-48、SBS-30,SBS-28与聚乙烯基甲基醚共混体系的相容性。DSC结果表明,随SBS中PS含量的升高,体系相容性变好,PS段分子量增大,也有助于体系相容。FT-IR结果表明PVME中COCH_3在1100cm~(-1)附近呈现的双峰的相对强度对体系的相容性十分敏感,而由于苯环C—H振动产生的698cm~(-1)峰位却不象PS/PVME体系那样随相容性的改变而有显著的改变。总而言之,嵌段高聚物SBS/均聚物PVME共混体系中,体系的相容性依赖于嵌段高聚物在体系中的组份含量及嵌段高聚物中PS的重量百分含量,PS段分子量的大小对体系相容性也有影响。