Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

Eu3+在Ba2TiSi2O8中的发光

The barium titano-silicate phosphors doped with Eu³⁺ were synthesized by high temperature solid state reaction. The structures of as-synthesized samples were characterized by powder XRD. The maximum peaks of emission spectra of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were respectively located at 450 and 618 nm, coming from the transitions of charge-transfer bands of Ti⁴⁺-O^2- and forced electric-dipole transition ⁵D₀-⁷F₂ of Eu³⁺. The luminous mechanisms of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were suggested. The effects of concentration of Eu³⁺ on the luminous performance of Ba₂TiSi₂O₈∶Eu³⁺ were also studied and the results showed that the optimum concentration of Eu³⁺ was 0.12 mol per mole of matrix.     

负载型Au-Pd双金属催化剂的制备及其对CO氧化的催化活性

采用改性的等体积浸渍法制备了SiO2负载的Au-Pd双金属催化剂,考察了催化剂的焙烧温度对CO氧化反应活性的影响.与623,723和773K的条件下焙烧的催化剂相比,673K焙烧的催化剂具有良好的催化CO氧化活性,CO完全转化温度低于398K.应用N2物理吸附、X射线衍射、程序升温还原、CO程序升温脱附及X射线光电子能谱等技术对催化剂进行了表征.结果表明,673K焙烧的催化剂具有最大的比表面积和最小的孔径,存在Au0,Pd0和PdO相,AuxPdy合金相很少;而773K焙烧的催化剂上除了含有Au0,Pd0和PdO相外,还存在明显的AuxPdy合金相.具有大比表面积,小孔径,Au0,Pd0和PdO多相共存的催化剂可使CO的吸附量增加,催化活性提高;而AuxPdy合金相的生成并不能提高催化剂的催化活性.     

Polyterephthalamides with naphthoxy‐pendent groups

A series of new aromatic polyamides having pendent naphthoxy groups were synthesized by the triphenyl phosphite‐activated polycondensation of (2‐naphthoxy)terephthalic acid (NOTPA) with various aromatic diamines in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), pyridine, and calcium chloride. The diacid monomer NOTPA was prepared from the nitro displacement of dimethyl 2‐nitroterephthalate with the potassium naphthoxide of β‐naphthol, followed by base‐induced ester hydrolysis. All the resulting polymers were noncrystalline and readily soluble in aprotic polar solvents such as NMP and N,N‐dimethylacetamide. Almost all the polymers could be solution‐cast to tough, creasable amorphous films with good mechanical properties, the values of tensile strengths ranging from 90 to 124 MPa with initial moduli ranging from 1.72 to 2.51 GPa. Except for two examples, all the other polyamides displayed discernible glass transitions between 189 and 248 °C in the differential scanning calorimetric traces. These polyamides showed insignificant decomposition below 400 °C in nitrogen or air. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1781–1789, 2002     

Synthesis of molecular ferromagnetics [R3R′X]MCr(C2O4)3 (X = N,R = Bun,R′ = Prn,Et, Me; X = P,R = Ph,R′ = Bun; M = Mn,Fe, Co,Ni, Cu)

The synthesis, IR spectra, and the temperatures of the transition into a ferromagnetic state (T _c) of layered ferromagnetics [R₃RX[MCr(C₂O₄)₃ (M = Mn, Fe, Co, Cu, and Ni) with the [Ph₃BuP]⁺, [Bu₃RN]⁺ (R = Pr, Et, and Me) cations capable of subsequently changing the distances between metallooxalate layers have been considered. The temperatureT _c has been found to be independent of the size of the organic cation. It is believed that the determining factors in the transition to a ferromagnetic state are exchange interactions inside the metallooxalate layer.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2327–2330, September, 1996.     

Application of Hot Press Sintering to Na2O-B2O3-SiO2 Gels Containing Quantum Dots for Lowering of Densification Temperature

Na₂O-B₂O₃-SiO₂ (NBS) gels containing a large amount of CdS quantum-dots (10 wt%) were densified using the hot press (HP) sintering method. By HP treatment, full-densification temperature could be lowered by about 40°C than that of the normal non-pressing (NP) heat treatment. Exciton absorption of CdS quantum-dots in HP-sample showed a large blue shift compared with that in the NP sample, and the size-distribution of CdS dots remained very sharp, with a mean particle diameter d = 3.66 nm and a standard deviation of = 0.72. HP pressure had a large effect on the reduction of sintering temperature and time, resulting in the suppression of the aggregation and growth of CdS quantum-dots in NBS glasses.     

Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Radiation polymerization of thermo-sensitive poly (N-vinylcaprolactam)

Temperature-sensitive poly (N-vinylcaprolactam) both in water-soluble state and in gel was prepared by γ-radiation polymerization. The effects of radiation dose, radiation dose rate and monomer concentration on polymerization and the low critical solution temperature characteristics of the polymer were studied. The results show that the polymer prepared within certain radiation dose (beyond 2 kGy) and dose rate range (2–14 Gy/min) has good temperature sensitivity and uniformity.     

The structure of diluted binary solutions of amides according to the heat capacity data

The specific heat capacities of hexamethylphosphoric triamide, diethylpropionamide, their aqueous solutions, and mixtures of hexamethylphosphoric triamide with formamide were measured in the temperature range from 288.15 to 318.15 K. The dependences of the partial molar heat capacity of aqueous solutions of amides on the composition of the mixture have maxima in the region of 0.02–0.04 molar fractions of amide. The maximum on a similar dependence for solutions of hexamethylphosphoric triamide corresponds to the concentration of 0.01 molar fractions. The conclusion on the formation of solvates (hydrates) in the systems studied was made. The heat capacity coefficients of pair and triple interactions were calculated in terms of the McMillan-Mayer theory. A change in the heat capacity characteristics with the temperature change was analyzed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2479–2483, December, 1998.     

温度及pH值敏感水凝胶的合成和应用

直接将丙烯酸单体与N-异丙基丙烯酸胺共聚交联合成了温度及pH值敏感的水凝胶。包埋于水凝胶中的药物的释放随温度升高和pH值增大而加快，药物的释放兼有温度和pH值敏感性，对pH值的响应更加显著。