手性氮磷配体与钌的配位过程的研究—原位变温 31P核磁及分子模拟计算

用原位变温 ³¹P NMR和分子模拟研究了手性氮磷配体与金属钌的配位过程。首先确定了配体及其与金属的配合物的化学位移信号分别在δ=-13.0ppm和δ=48.2ppm。配位过程在293～343K温度范围内,相继生成四配位和五配位中间体。四配位体在 ³¹P NMR上对应于30.8ppm和-15.0ppm的两个信号;五配位中间体对应于35.1ppm和-16.5ppm的两个信号;最后在343K,产物中只有六配位的配合物存在,其信号出现在48.2ppm。为了得到各种中间体的结构,用分子模拟方法进行了结构优化计算,并比较了它们的构象能。计算结果表明,四配位中间体有两种构象,能量相差9kcal·mol^-1,它们可能同时存在于平衡状态。而五配位中间体只有一种绝对优势构象,尚有一个磷原子未参与配位。六配位的钌金属配合物的结构优化结果显示,两个氯原子分别位于PNNP原子所构成平面的两侧。其构象能为162.0kcal·mol^-1,其中键角能的贡献是112.5kcal·mol^-1,而非键静电作用是-41.4kcal·mol^-1,这表明分子内的静电吸引力对于形成完全配位产物是十分有利的,但是收敛的配体分子却承受了较大的键角张力。     

A modified simplex method for multifactor optimization of selectivity in gas chromatography

A computer-assisted advanced simplex method is presented for the simultaneous optimization of multifactor ( stationary phase loading, carrier gas flow rate and column temperature ) for separation of ten compounds in gas chromatography. A three factors factorial design was used. The method was based on a special polynomial established from fifteen preliminary runs, using resolution as the selection criterion, with connection to a general simplex method. Excellent agreement is found between the predicted data and the experimental results, and most of experiments required in the general simplex method can be omitted.     

Exploring high pressure structural transformations,electronic properties and superconducting properties of MH2 (M = Nb,Ta)

The high-pressure structures and properties of MH₂ (M = Nb, Ta) are explored through an ab initio evolutionary algorithm for crystal structure prediction and first-principles calculations. It is found that NbH₂ undergoes a phase transition from a cubic Fm$\overline{3}$m structure with regular NbH₈ cubes to an orthorhombic Pnma structure with fascinating distorted NbH₉ tetrakaidecahedrons at 48.8 GPa, while the phase transition pressure of TaH₂ from a hexagonal P6₃mc phase with slightly distorted TaH₇ decahedron to an orthorhombic Pnma phase with attractive distorted TaH₉ tetrakaidecahedrons is about 90.0 GPa. Besides, the calculated electronic band structure and density of states demonstrate that all of these structures are metallic. The Poisson’s ratio, electron localization function, and Bader charge analysis suggest that these phases possess dominant ionic bonding character with the effective charges transferring from the metal atom to H. From our electron–phonon calculations, the calculated superconducting critical temperature T_c of the Pnma-NbH₂ is 6.903 K at 50 GPa. Finally, via the quasi-harmonic approximation method, the phase diagrams at pressure up to 300 GPa and temperature up to 1000 K of MH₂ (M = Nb, Ta) are established, where the transition pressure of Fm$\overline{3}$m-NbH₂ → Pnma-NbH₂ and P6₃mc-TaH₂ → Pnma-TaH₂ were found to decrease with increasing temperature.     

Self-strengthening and high temperature sintering in binder-free silicon nitride

A thermal strengthening process, which occurs during low-temperature heating of binder-free silicon nitride, has been investigated using simultaneous thermal analysis, dilatometry and FTIR and shown to occur in separate stages over clearly identifiable temperatures. Reactions which give the strengthening are the loss of physically and chemically combined water and the decomposition of ammonium carbonate and various hydrosilicates. Compacts have bend strengths of 8–10 MPa after strengthening at 500°C and 30–34 MPa after strengthening at 900°C. High-temperature dilatometry shows several stages of sintering. The maximum rate occurs at 1800°C with shrinkage commencing at 1450°C. Densities of 98.3% theoretical are obtained on heating to 1900°C.     

Evaluation of the calibration errors on cooling of a differential scanning calorimeter using different sets of standard metals

The temperature calibration on cooling of thermal analysis instruments is important for the accurate study of the non-isothermal crystallization kinetics of semi-crystalline polymers. In previous works, a methodology was proposed for performing the calibration on cooling of differential scanning calorimeters (DSCs) with standard metals, and the calibration errors were checked using transitions of high-purity liquid crystals. In this work, alternative, physically meaningful, procedures for carrying out the calibration on cooling are analyzed and validated. The calibration errors are evaluated also with liquid crystalline transitions, when the calibration is performed with standard metals, in a wide temperature range, and when due account is taken for the need of isothermal corrections to the temperature measurements. It is shown that any pair of standard metals may be used to calibrate on cooling, that the calibration errors increase for wider working temperature ranges and that, providing that certain conditions are fulfilled, both calibration procedures yield similar results.     

单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

辐照温度对聚芳醚酮辐射交联行为的影响

<正> 可溶性含酚酞侧基聚芳醚酮(PEK-C)是一种新型的具有耐高温、耐水解、耐化学腐蚀、自润滑性能的工程塑料,它具有如下结构:     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

New Temperature Integral Approximate Formula for Non-isothermal Kinetic Analysis

A new approximate formula for temperature integral is proposed. The linear dependence of the new fomula on x has been established. Combining this linear dependence and integration-by-parts, new equation for the evaluation of kinetic parameters has been obtained from the above dependence. The validity of this equation has been tested with data from numerical calculating. And its deviation from the values calculated by Simpson's numerical integrating was discussed. Compared with several published approximate formulae, this new one is much superior to all other approximations and is the most suitable solution for the evaluation of kinetic parameters from TG experiments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Low-temperature electrothermal vaporization of thenoyltrifluoroacetone complex of Sc(III) and Y(III) for sample introduction in an inductively coupled plasma atomic emission spectrometry,and their determination in biological samples

A new method for inductively coupled plasma atomic emission spectrometry (ICP-AES) determination of trace Sc and Y, based on gaseous compound introduction into the plasma as their thenoyltrifluoroacetone (TTA) complexes by electrothermal vaporization was developed. Using the reagent TTA as chemical modifier can not only enhance the analytical signals, but also reduce the vaporization temperature. At a temperature of 1,000 °C the trace Sc and Y can be vaporized completely into ICP. The factors affecting the formation of the chelate and its vaporization behavior, such as drying time, vaporization temperature/time, reaction medium and the amount of TTA, were investigated in detail. Under the optimized conditions (drying temperature/time 100 °C/10 s, vaporization temperature/time 1,000 °C/4 s), the limits of detection for Sc and Y were 19 pg and 34 pg (3), respectively, and the relative standard deviations for Sc and Y were 4.2% (c _Sc=0.2 g mL^–1; n=7) and 2.6% (c _Y=0.5 g mL^–1; n=7). The linear ranges of the calibration graphs cover three orders of magnitude. The method was applied to the analysis of the biological reference materials (GBW 07602, bush branches and leaves; GBW 07604, poplar leaves), and the results obtained were in good agreement with the certified values.