聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。     

The thermodynamic properties of alkali metal compounds at high temperatures

A research program has been in progress to obtain reliable thermodynamic data on various binary and ternary alkali metal compounds in the temperature range of 300 to 1500 K. To date, heat capacity measurements have been made on cesium and rubidium chromates, dichromates, zirconates, molybdates, dimolybdates, and halides in the temperature range of 300 to 800K. In addition, measurements are planned or are currently in progress on cesium and rubidium chalcogenides, aluminates, uranates, silicates, and several other lithium, sodium, and potassium compounds. The status of the research program is discussed.     

A statistical model for the optimization of dsc performance in the evaluation of drugs for preformulation studies

Differential scanning calorimetry (DSC) is a thermal analytical tool for preformulation studies. Extrapolated melting temperature (T_P) and heat of fusion (ΔH_f) can be used as parameters for optimizing the DSC performance. Two model pharmaceuticals acetaminophen and nicotinamide are used in this study. Using a factorial design for the experimental model and matrix analysis the results, the effect of sample mass, heating rate and the nitrogen flow rate were evaluated on the ΔH_f values and T_P values. Two levels for each of the procedural variables were used as a balanced experimental design with two sample sizes, two heating rates and two nitrogen flow rates. It was found that the change in the heating rate caused significant changes in the ΔH_f values but not the T_p values for acetaminophen. However, no significant effect was found for the T_p value but ΔH_f value was affected to a certain extent for nicotinamide.     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

Nonionic latices in aqueous media part 1. Preparation and characterization of polystyrene latices

A series of non-ionic polystyrene latices in aqueous media containing particles with a narrow size distribution have been prepared using a nonyl phenol poly(ehylene glycol) condensate as the surfactant, methoxy poly(ethylene glycol methacrylate) as the comonomer/stabilizer, and ascorbic acid/hydrogen peroxide as the initiator system. As a control synthesis for comparison with the above latex, a charge stabilized polystyrene latex was prepared, using an anionic surfactant and potassium persulphate as the initiator. Latices employing a combination of charge plus steric stabilization mechanisms were also prepared, in order to investigate the effect of the non-ionic surfactant and the comonomer/stabilizer. The particle size of the latices was measured by transmission electron microscopy, the surface charge density by conductimetric titration and the glass transition temperature of the polymer by differential scanning calorimetry. The latex prepared using non-ionic ingredients, showed no titratable charge and exhibited a profound lowering of the glass transition temperature, with respect to the charge stabilized latex. On the basis of these results, schematic models for the polymerization mechanism and the morphology of the latex particles are proposed.     

Some non conventional devices with temperature control design and application

The development of a temperature control system based on semiconductor thermobatteries has been used in a set of devices for studying the martensitic transformation. The devices range from a simple stage for an optical microscope to a more elaborated system as a differential scanning calorimeter [1]. Here the attention is placed in this last system. The general problems of the temperature scanning calorimetry are reviewed from the signal theory point of view and the solutions applied to our system discussed. Some measurements are shown as an example of its application.     

On the correlation of the glass transition temperature of a copolymer with its comonomer sequences

The glass transition temperature of a copolymer depends not only on chemical composition but also on its comonomer sequences. This experimental fact is explained by Barton's and Johnston's equations. Their equations, though complicated, become simple, if a suitable parameter is used to describe the comonomer sequences. It is shown that with these new expressions, their equations can be used to understand glass transition temperatures of two additional types of copolymers, compatible multiblock copolymers and homopolymers with various tacticities treated as steric copolymers.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayWe wish to thank the reviewer for his/her kind linguistic improvement of this article.     

Effect of evaporation temperature on the formation of particulate membranes from crystalline polymers by dry-cast process

The membrane formation of crystalline poly(ethylene-co-vinyl alcohol) (EVAL), poly(vinylidene fluoride) (PVDF), and polyamide (Nylon-66) membranes prepared by dry-cast process was studied. Membrane morphologies from crystalline polymers were found to be strongly dependent on the evaporation temperature. At low temperatures, all the casting solution evaporated into a particulate morphology that was governed by the polymer crystallization mechanism. The rise in the evaporation temperature changed EVAL membrane structure from a particulate to a dense morphology. However, as the temperature increased PVDF and Nylon-66 membranes still exhibited particulate morphologies. The membrane structures obtained were discussed in terms of the characteristics of polymer crystallization in the casting solution theoretically. At elevated temperatures the crystallization was restricted for the EVAL membrane because the increase rate in the polymer concentration was fast relative to the time necessary for growth of nuclei. Nonetheless, the time available for PVDF and Nylon-66 with stronger crystalline properties was large enough to form the crystallization-controlled particulate structure that differed in particle size only. In addition, particles in the PVDF membrane were driven together to disappear the boundary, but those in the Nylon-66 membrane exhibited features of linear grain boundary. The difference in particle morphology was attributed to the Nylon-66 with the most strongly crystalline property. Therefore, the kinetic difference in the crystallization rate of the polymer solution play an important role in dominating the membrane structure by dry-cast process.     

Thermodynamic Study of the Three Isomers of Bromobenzoic Acid

The enthalpies of sublimation and fusion and triple-point temperatures of 2-bromo-. 3-bro-mo- and 4-bromobenzoic acids have been determined precisely by sublimation calorimetry, drop calorimetry and differential thermal analysis. The measurements of sublimation enthalpy of the three acids were made at 333, 348 and 363 K, respectively, using a Tian-Calvet microcalorimeter equipped with Knudsen effusion cells. The derived standard molar enthalpies of sublimation at 298.15 K are (95. 94±0. 41), (99. 20± 0.18), and (103. 08±0. 59) kJ · mol-1for the 2-bromo-, 3-bromo- and 4-bromobenzoic acids, respectively. In addition, the saturated vapour pressure of these compounds was also calculated on the basis of the sublimation experiments. The enthalpy of fusion, the triple-point temperatures and the mole fraction purities of the samples of the investigated substances were measured using the mean temperature version DTA apparatus developed by the CTM of the CNRS in Marseille. The triple-point temperature and the     

Miscible blends through hydrogen bonding: effects on polymer properties

Miscible blends through hydrogen bonding have been intensively studied. The effects of a variety of miscible hydrogen bonded polymer blends on properties such as thermal and thermal oxidative stability, moisture sensitivity, modulus and glass transition temperature are discussed. In addition, the preparation of semi-interpenetrating polymer networks (IPNs) and studies of the effect of crosslinking on the miscibility in hydrogen bonded polymer blends are reviewed.