SAPO－5，－11和－34分子筛模板剂的脱除及其结构的热致变化

用水热法合成了ＳＡＰＯ－５，－１１和－３４硅磷酸铝类分子筛。并对经不同温度焙烧处理的样品进行表征，结果表明：分子筛中模块剂的热分解过程与其结构和孔大小有较大的关系。在ＳＡＰＯ－５和ＳＡＰＯ－３４分子筛中，外部联接的Ｔ－Ｏ－Ｔ键的反对称伸缩振动峰（１２４０ｃｍ~（－１）－１０３８ｃｍ~（－１））和其对称伸缩振动（７３４ｃｍ~（－１）－６００ｃｍ~（－１））及双环的变形振动（６００－５００ｃｍ~（－１））的吸收峰对样品的结晶度比较敏感。但在ＳＡＰＯ－１１中，分子筛骨架中Ｔ－Ｏ－Ｔ反对称伸缩振动（１２２５ｃｍ~（－１）和１０３８ｃｍ~（－１））随结晶度的下降而基本保持不变，但内四面体（ＴＯ_４）的对称伸缩振动，反对称伸缩振动峰及Ｔ－Ｏ弯曲振动峰随样品焙烧温度的升高而减弱并分裂。红外吸收带向低频方向移动。ＳＥＭ－ＥＤＡＸ结果表明：随样品焙烧温度的升高，结晶度下降，分子筛晶形变得不规则，晶面越来越粗糙，但结晶度的下降并非由于其中ＰＯ_４四面体的热分解所引起，而是由外部联结的Ｔ－Ｏ－Ｔ键的断裂，双环被破坏及骨架元素间的重排所引起。     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

氧气在阴极的电还原及其应用研究进展

本文综述了氧阴极电还原的研究进展，着重介绍了阴极表面修饰对该过程的影响以及氧阴极电还原在有机物电合成与废水处理方面的研究进展。     

IMPACT PROPERTIES OF METALLOCENE - CATALYZED ETHYLENE-α-OLEFIN COPOLYMERS

The impact properties of two selected metallocene-catalyzed ethylene-butene copolymers and one conventionalcopolymer were evaluated using Izod impact test. It is found that the metallocene-catalyzed copolymer shows superior impactproperties. This result was explained on the basis of the more homogeneous inter-molecular composition distribution andnarrower molecular weight distribution, which leads to more homogeneous morphology with fewer defects. Stepwisecrystallization improves the impact properties, especially in the crack propagation process, to a large extent. This is due to thedecrease of entanglements by stepwise crystallization, which is advantageous for the chain slip and shear. The polymer withheterogeneous intra-molecular composition distribution exhibits a more evident improvement of impact properties understepwise crystallization.     

Entrapped mixed microorganisms to treat organic wastewater from food industry

Limited land and insufficient technicians to operate a wastewater treatment system are main restrictions for many factories. Therefore, an ideal wastewater treatment method for a small or land-limited factory must possess merits such as high performance efficiency, high organic loading rate, little odor, simple operation, easy maintenance, and little land required (simultaneously). An entrapment technique to immobilize mixed microorganisms to treat organic wastewater, which was developed in the present work, possesses these characteristics. This project was done on a laboratory scale. The microorganisms were activated sludge (an undefined mixture of microorganisms obtained directly from a domestic wastewater treatment plan) and the mixed microorganisms were immobilized in cellulose triacetate by means of an entrapment technique to treat organic wastewater from food industry. After wastewater was treated by this system, the SCOD (soluble COD) removal efficiency of 81% evaluated samples exceeded 80% in 1.5 ± 0.9 g SCOD/L/d of the volumetric loading rate and 7–10 h for the hydraulic retention time. This wastewater treatment method can be applied to other organic industrial wastewater.     

Hydrogen peroxide in basic media for whole blood sample dissolution for determination of its lead content by electrothermal atomization atomic absorption spectrometry

Hydrogen peroxide in basic media is proposed as a means for dissolving whole blood samples to be analyzed by electrothermal atomization atomic absorption spectrometry, ET AAS. Approximately 2 g of the whole blood sample were directly weighed in a 150 mL volumetric flask; 3 mL of a NaOH 0.2 mol L⁻¹ solution, two drops of 1-octanol, as an antifoaming agent, and 1 mL of 30% volume hydrogen peroxide were added to the flask to promote oxidation. The solution was then manually shaken and after approximately three minutes of shaking, a clear solution, with no apparent suspended solids or greasy layers, was obtained. Distilled-deionized water was used to complete the volume. Ten μL of the resulting solution along with 10 μL of a solution containing 5000 mg L⁻¹ of NH₄H₂PO₄ and 300 mg L⁻¹ of Mg(NO₃)₂ as a modifier, were injected into transversely heated graphite tubes for lead determination. Both aqueous standards and standard addition calibration curves produced results not significantly different at a 95% confidence limit level. Accuracy of the measurements was assessed by analysis of the IAEA A-13 (concentration of trace and minor elements in freeze dried animal blood) standard reference material containing 0.18 mg L⁻¹ lead on a dry basis and by means of recovery tests. Analysis of the IAEA A-13 standard produced 0.17 ± 0.02 mg L⁻¹ lead on a dry basis; recovery tests afforded values from 95 to 105%. Ten consecutive measurements of a 5 ppb lead solution gave a characteristic mass of 47.2 pg and a (3S) detection limit of 1.77 μg L⁻¹ Pb. Results obtained from analysis of whole blood samples of volunteer donors covered a lead concentration range between 8 and 21 μg L⁻¹ with a mean value of 11.9 ± 4.7 μg L⁻¹.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

微量元素与防病治病

介绍了微量元素在防治疾病中的作用及对健康长寿的意义，涉及人体必需微量元素，有害元素，有机锗，微量元素是健康长寿的重要手段以及微量元素与现代文明病。     

Comments on the electronic properties of cyclopropane,cyclobutane, and cyclohexane

Spectral quantities of cyclopropane, cyclobutane, cyclohexane, and of several derivatives, have been calculated by a semiempirical all-valence electron SCF-CI MO method. In cyclopropane, HOMO is practically localized in the carbon-frame, and LVMO is purely so. In cyclobutane, these two MO's are based on C-H bonds, while cyclohexane holds an intermediate position. Despite the overall similarity-experimental and computed-of the spectra of these molecules, assignments are non-parallel. Like cyclopropane, cyclobutane can extend conjugation, but to a diminished degree; cyclohexane behaves in this respect like an acyclic alkane. An interpretation of this gradation, in terms of the nature of high-lying MO's, is proposed.