Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Pyrolysis Analysis and Kinetics of Crude Oils

This research presents the results of an experimental study on the determination of pyrolysis behaviour and kinetics of six crude oils by differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). Crude oil pyrolysis indicated two main temperature ranges where loss of mass was observed. The first region between ambient to 400°C was distillation. The second region between 400 and 600°C was visbreaking and thermal cracking. Arrhenius-type kinetic model is used to determine the kinetic parameters of crude oils studied. It was observed that as crude oils gets heavier (°API decreases) cracking activation energy increases. Activation energy of cracking also show a general trend with asphaltene content. This revised version was published online in July 2006 with corrections to the Cover Date.     

On the mechanism of solute retention in RP-HPLC systems with B+AB1+AB2 type eluents

Summary Intermolecular interactions between the solute and the moieties constituting the mobile phase significantly contribute to the overall retention pattern of a given solute in a given chromatographic system. In this paper retention of solute is discussed in the case of the B+AB₁+AB₂ type mobile phase, which, in a quasithermodynamic way, can be divided into seven individual moieties. One evaluates the influence of each moiety on solute retention, and refers these regularities to the polarity of the solutes.     

Non-destructive in situ determination of pigments in 15th century wall paintings by Raman microscopy

Raman microscopy has been applied to the study of 15th century wall paintings in a chapel of St. Orso Priory palace (Aosta, Italy) in view of their restoration. The use of a transportable instrument has made it possible to work non-destructively in situ without sampling. The main inorganic pigments used by the unknown artist, namely mercury sulphide, azurite, white lead, red and yellow ochre, carbon black and lead tin yellow type I have been identified, and the presence of organic substances and of some decay products (calcium sulphate and oxalate) has been observed.     

Conformational analysis of 5,6-dihydropyrimidine and its derivatives

The equilibrium geometry and inversion barriers of 5,6-dihydropyrimidine, 6,7-dihydroazolopyrimidines with node nitrogen atoms and their alkyl (Me, Et, Prⁱ, Bu^t) and phenyl derivatives were calculated using a molecular mechanics approach. Annelation with azole cycles and the introduction of substituents have a slight effect on the equilibrium conformation of the dihydrocycle (distorted sofa). Alkyl substutuents at saturated carbons have an essentially equatorial orientation in 5,6-dihydropyridimine derivatives and are axial in the annelated analogs. On the other hand, the equatorial conformers are more stable in phenyl derivatives of dihydroazolopyrimidines. Factors determining the relative stability of conformers were analyzed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 487–491, March, 1995.     

Analysis and Speciation of Traces of Arsenic in Environmental,Food and Industrial Samples by Voltammetry: a Review

Voltammetric approaches for the determination of arsenic and speciation at trace levels are critically appraised in a review covering the literature from 1970 to 2002. Special attention is devoted to stripping modes and to issues related to the choice of working material and supporting electrolyte. A section is dedicated to the management of real samples and aspects of sample preparation. An extensive compilation, organized by real sample type, gathers essential experimental conditions. Potentiometric stripping analysis is introduced for sake of comparison. The coupling of voltammetric detection or preaccumulation with FIA, chromatography, capillary electrophoresis and ICP techniques is also addressed.     

流动注射电化学发光测定维生素B1的研究

基于发现在强碱性介质维生素 B1对电生BrO-氧化Luminol的强化学发光有很强的抑制作用, 将在线恒电流电解产生BrO-与流动注射技术结合,建立了流动注射电化学发光测定维生素B1的新方法.该方法测定维生素B1的线性范围为1.0×10-8～6.0×10-6g·ml-1,检出限为3.2×10-9g·ml-1,相对标准偏差为1.2%(n=11).该法具有灵敏度高,可控性强等优点,用于片剂中的维生素B1含量测定,结果满意.     

Solubilities of lanthanum oxide in fluoride melts: Part I. Solubility in M3AlF6 (M = Li, Na, K)

Solubility of lanthanum oxide was measured by thermal analysis. The solubility in alkali cryolites is rather high, because of chemical reactions between lanthanum oxide and cryolites. In Li₃AlF₆-La₂O₃, alumina precipitates, in the other systems the mixed oxide LaAlO₃ is formed. In La₂O₃-Li₃AlF₆ the eutectic point is at 9.5 mol% La₂O₃ and 755 °C. The eutectic points in La₂O₃-Na₃AlF₆ and La₂O₃-K₃AlF₆ are at 11.5 mol% La₂O₃, and at 937 and 934 °C, respectively.     

Molecular and crystalline structure of the enol form of (dimorpholinophosphoryl)chloroacetaldehyde and (dimorpholinophosphoryl)-dibromomethane

The crystal and molecular structures of the products of the halogenation of the dimorpholide of ethoxyvinylphosphonic acid were determined by the method of x-ray structure analysis. It was established that (dimorpholinophosphoryl)chloroacetaldehyde only exists in the crystals as the Z-enol [(Z)-1-hydroxy-2-(dimorpholinophosphoryl)-2-chloroethene] with intra- and intermolecular H-bonds (=CH...O=P and OH...O=P). The (dimorpholinophosphoryl)dibromomethane forms centrosymmetric eight-membered cyclic dimers in the crystals due to intermolecular CH...O=P H-bonds. The structure of the morpholine and phosphoryl groups in both compounds was discussed.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan' Scientific Center, Russian Academy of Sciences, 420083 Kazan'. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2730–2737, December, 1992.     

Determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder by flow injection analysis with spectrophotometric detection

In this work, a flow injection system with spectrophotometric detection was developed for the determination of lithium in pharmaceutical formulations used in the treatment of bipolar disorder. Reaction between Quinizarine (1,4-dihydroxyanthraquinone) and Li(I) ion in alkaline medium containing dimethylsulfoxide (DMSO) was explored for this purpose. The flow system was optimized regarding to its chemical (DMSO, Quinizarine and NaOH concentrations and sample pH) and physical parameters (sample loop volume, carrier flow rate and reactor length) in order to establish better conditions in terms of sensitivity and sampling frequency. The results obtained showed that the concentration of DMSO in the reagent solution presents remarkable influence on the magnitude of analytical signal. Chemical species that could be found in the formulations such as Na(I), K(I), Mg(II), Ca(II), Ti(IV), Cl⁻, CO₃²⁻ e sodium dodecylsulfate were tested as possible interfering ions. Among them, only non-monovalent cations presented noticeable interference on lithium signal. However, they were not found in concentrations high enough to cause interference in the determination of lithium in the samples. Sample preparation was performed by sonicating a slurry prepared by dispersing 100 mg of powdered sample in 15 mL of 0.10 mol L⁻¹ HCl solution. Results obtained by developed methodology were not statistically different from those obtained by flame emission spectrometry. In the optimized conditions the method presented a linear range of 5-40 mg L⁻¹ and a relative standard deviation of 3.6% at 5 mg L⁻¹ Li concentration. Detection and quantification limits were 0.54 and 1.8 mg L⁻¹, respectively. Sampling frequency, calculated as the time interval passed between two consecutive injections, was 60 samples per hour. The methodology was successfully applied in the determination of lithium in three commercial samples.