Thermal behaviour and firing characteristics of Zr/KClO4 primer mixture containing CuO

The effect of CuO on the thermal behaviour of Zr/KClO₄ primer mixtures was studied by thermoanalytical techniques, and the Bruceton method and its related calculation. It was found that the CuO catalytically promoted the decomposition of Zr/KClO₄ primer mixtures and shifted the exothermic peak of DSC curves to lower temperatures. In addition, the Zr/KClO₄ primer mixture containing CuO had a significant effect on the firing characteristics of electro-explosive devices.     

穿过液膜的自发电势振荡

An artificial membrane consisting of pricramic acid in nitrobenzene was used as an oil phase imposed between two aqueous phases. The right one contained trimethyl-slearylammonium chloride and aicohol; and the left contained sucrose solution (or H_2O). We found that this system exhibited rhythmic oscillation of electrical potential. The amplitude of the oscillations was between 20—150 mV. The oscillations were observed even when ethyl alcohol was absent in the aqueous of trimethylslearylammonium Chloride, and the increase in amplitude of oscillation with time was found to be less in the presence of sucrose. Some of the expremental results have been explained.     

Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

抗肿瘤药物氮三乙酰肼和金属离子配位能力的研究

本文研究了抗癌药物氮三乙酰肼(Nitrilotriacetic hydrizide,NTH)和生命必需元素以及Al~(3 ),Ga~(3 ),In~(3 )的配位能力并用pH电位法测定了它们在生理条件下(37℃,Ⅰ=150mM dm~(-3)NaCl)的配合物生成常数。电位滴定数据是用ZPLOT,MINIQUAD,ESTA等计算机程序处理的。实验结果表明NTH与它的非生理活性的母体化合物氮三乙酸相比较,对Zn~(2 ),Mn~(2 )等过渡元素的配位能力表现较大的差异性。这种情况在Revercan,ICRF-198,ICRF-236和5-烯去甲基斑蝥酸等其他抗肿瘤活性化合物中也曾观察到。 NTH与三价金属Fe~(3 ),Ga~(3 ),Al(3 )和In~(3 )等有较大的配位能力,这与它的烯醇式结构有关。由于这些配合物在广泛的pH范围内生成,以及它的高稳定性,因此有可能被用作为肿瘤定位试剂或生物体营养元素铁传输的有效载体。     

高分辨双晶XRF研究酞菁化合物中硫杂质的化学态

酞菁化合物是一种大π键共轭体系的平面分子结构，它以颜色鲜艳、化学稳定性和价格便宜等特点，已在颜料工业上得到了广泛地应用．随着高科技的发展，酞菁化合物的应用进入静电复印的领域．研究中发现：酞普化合物的晶体结构直接影响它的色泽、耐热性、稳定性以及光电导性．在诸多的酸苦晶型中，β-型酞菁是比较稳定的一种，其它晶型届亚稳态型．近年来，光敏性较好的X-型用于激光印刷机感光鼓的载流子产生层［1］．用作静电复印中的酞育粗颜料，一般多为a一型，且含有大量的有机和无机杂质[2]，经高温真空升华提纯后，转变为卢一型．有趣…     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

The preparation of nano‐scope chitosan‐oligomer copper complexes and their interaction with DNA

Water‐soluble low molecular weight chitosan of nanometer level and its copper complexes were prepared, and characterized by IR spectra, elemental analysis and gel permeation chromatography (GPC). The modes and mechanism of these copper complexes interaction with DNA were studied by a fluorescent probe method and electrophoresis analysis. It is suggested that there are electrostatic and intercalation modes of copper complexes interacting with DNA. At first, the cationic complex electrostaticly binds to the negatively charged phosphate backbone of DNA, and then a portion of the complex intercalates between the base pairs on the DNA duplex strand. Copyright © 2005 John Wiley & Sons, Ltd.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.