A Novel Simplified Column-Switching Technique for the Determination of Traces of Bromate in High Concentration Matrices

The column-switching technique has been widely used to determine trace level ions in the presence of high concentration matrix. A novel simplified column-switching method is proposed where bromate (as a model compound) was determined using this technique. The switching time window was confirmed by the retention time of determined ions. This technique can completely carry out the same function as the other column-switching technique do, but only one extra ten-way injection valve coupled to ion chromatograph was used. By using column-switching technique, it is possible to determine 0.2 μg L⁻¹ bromate in the presence of 100 mg L⁻¹ chloride by direct injection of 2000 μL without any pretreatment and the relative standard deviation (RSD) of the peak height for the eleven successive injections of 0.2 μg L⁻¹ bromate solution is 23.1%. The detection limit for bromate is 0.09 μg L⁻¹, which showed the method was very sensitive. The technique has been applied to the determination of bromate in drinking water, and the spike recovery is in the range of 96–104%.     

Crystal Structures of [Ni(Phen)(i‐Bu2PS2)2] and [Ni(Phen)3](i‐Bu2PS2)2 Complexes and Interaction between Coordinated 1,10‐Phenanthroline Molecules

Single crystals of [Ni(Phen)(iBu₂PS₂)₂] (I) and [Ni(Phen)₃](iBu₂PS₂)₂ (III) compounds were grown, and their structures were determined by Xray diffraction analysis (CAD4 diffractometer, MoK radiation, 3336 F _hkl , R = 0.0373 for I and 2575 F _hkl for III). The crystals of complex I have a triclinic unit cell with the following parameters: a = 11.097(1) , b = 14.903(2) , c = 22.650(3); = 75.18(1)°, = 80.50(1)°, = 75.07(1)°, V = 3479.2(7)³, Z = 4, _calc = 1.255 g/cm³, and space group 1; the crystals of III have a monoclinic unit cell with the following parameters: a = 19.010(3), b = 15.481(1) , c = 17.940(3); = 97.58(1)°, V = 5233.5(12)³, Z = 4, _calc = 1.292 g/cm³, and space group C2/c. The structure of complex I is built from mononuclear molecules, and the structure of III, from [Ni(Phen)₃]²⁺ complex cations and i Bu₂PS₂ ^- outersphere anions. The NiN₂S₄ coordination polyhedra in the structure of I and NiN₆ in the structure of III are distorted octahedra. Based on structural data, the interaction between the coordinated Phen molecules of complexes I, [Ni(Phen)₂(iBu₂PS₂)](iBu₂PS₂) (II), and III is considered, as well as the packing modes of these complexes.     

The Influence of Sulfate‐Doping on the Nature of V Sites in VOx/TiO2 Catalysts

EPR, UV/Vis and FTIR spectroscopy as well as thermal analysis (TA/MS) were applied to study the influence of sulfate species present in the anatase support on the specific nature of VO_x species in supported VO_x/TiO₂ catalysts. Those sulfate species modify the local structure of the supported vanadyl species and lead to the formation of two types of VO²⁺ sites instead of only one type being formed on sulfate‐free anatase. EPR and FTIR spectroscopic measurements revealed that a part of the VO²⁺ species are directly bound to the surface sulfate species. By TA/MS it was found that SO₂ is released at lower temperature from VO_x/TiO₂ in comparison to the vanadium‐free support. The direct bonding between sulfate and VO_x species stabilizes the latter on the surface of VO_x/TiO₂ resulting in three effects: 1) a higher V site dispersion in comparison to sulfate‐free TiO₂, 2) a better resistance of surface vanadyls against diffusion into the bulk of the support and 3) a much faster reoxidation of reduced V sites than observed on sulfate‐free TiO₂.     

Effect of substituents on ionization potentials of phosphorus compounds. Conjugation in radical cations

The first vertical ionization potentials (I) of phosphorus compounds P(X_i)₃, OP(X_i)₃, SP(X_i)₃, (4-XC₆H₄)₃P, and PCX are related to the inductive, resonance, and polarizability parameters of inorganic, organic, and organometallic substituents X by dependences of the type I = I _H + a_I + b_R ⁺ + c, where I _H is the I value for X = H. The I values are also affected by hyperconjugation. The ratio of the contributions of the resonance (b_R ⁺) and polarizability (c) effects to the I value is determined by the degree of delocalization of the unpaired electron and the positive charge in the radical cations formed upon ionization of neutral molecules. The _R ⁺ resonance parameters of organosilicon, organogermanium, and organotin substituents bound to the P ^·+ radical cation center were calculated for the first time.     

Hydroarylation of alkynes and alkenes through alumina-sulfuric acid catalyzed regioselective CC bond formation

A highly atom-efficient synthetic protocol for hydroarylation of terminal-aryl alkynes and styrene through the regioselective CC bond formation via the electrophilic addition of naphthols and substituted phenols has been developed using alumina-sulfuric acid as a heterogeneous supported solid acid catalyst. This methodology shows excellent regioselectivity and affords the desired product in good to excellent yield. The heterogeneous catalyst can also be recycled efficiently without much loss of activity.     

NMR chemical shifts in the low–pH form of a-chymotrypsin. A QM/MM and ONIOM–NMR study

 The relationship between hydrogen bonding and NMR chemical shifts in the catalytic triad of low-pH α-chymotrypsin is investigated by combined use of the effective fragment potential [(2001) J Phys Chem A 105:293] and ONIOM–NMR [(2000) Chem Phys Lett 317:589] methods. Our study shows that while the His57 N^δ1−H bond is stretched by a relatively modest amount (to about 1.060 ?) this lengthening, combined with the polarization due to the molecular environment, is sufficient to explain the experimentally observed chemical shifts of 18.2 ppm. Furthermore, the unusual down-field shift of H^ɛ1 (9.2 ppm) observed experimentally is reproduced and shown to be induced by interactions with the C=O group of Ser214 as previously postulated. The free-energy cost of moving H^δ1 from His57 to Asp102 is predicted to be 5.5 kcal/mol. Received: 26 September 2001 / Accepted: 6 September 2002 / Published online: 21 January 2003 Contribution to the Proceedings of the Symposium on Combined QM/MM Methods at the 222nd National Meeting of the American Chemical Society, 2001 Correspondence to: J. H. Jensen e-mail: jan-jensen@uiowa.edu Acknowledgements. This work was supported by a Research Innovation Award from the Research Corporation and a type G starter grant from the Petroleum Research Fund. The calculations were performed on IBM RS/6000 workstations obtained through a CRIF grant from the NSF (CHE-9974502) and on supercomputers at the National Center for Supercomputer Applications at Urbana-Champaign. The authors are indebted to Visvaldas Kairys for help with the CHARMM program, and to Daniel Quinn for many helpful discussions.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Conformational studies of basic poly (α-amino acid)s in reversed micelles

The conformation of various basic poly (-amino acid)s was investigated by CD measurements in aqueous solutions containing bis (2-ethylhexyl)sodium sulfosuccinate (AOT) as well as in the AOT reversed micelles. The addition of AOT into an aqueous solution of poly(L-lysine) induces the conformational transition from coil to ordered structure, followed by aggregation. On the other hand, poly(L-lysine) assumes-structure in the reversed micelles at low w_ovalue (w_o=[H₂O]/[AOT]). Similarly to poly(L-lysine), poly(L-ornithine) takes an ordered structure in the aqueous solution containing AOT and-structure in the reversed micelles. In this case, however, these ordered structures are not so stable, compared with that of poly(L-lysine). Poly(L-arginine) undergoes the conformational transition from coil to helix by addition of AOT into the aqueous solution. Further addition of AOT allows transformation into-structure. Copoly(L-lysyl-L-leucine) with 63% leucine residue was shown to take a stable helical conformation even in pure water. In the reversed micelles, however, this ordered structure is significantly changed probably because the hydrophobic interaction among the leucyl residues is lowered in the reversed micelles.     

新型含氟液晶类化合物的质谱研究

本文报道66个新型含氟液晶类化合物的电子轰击电离质谱(EIMS). 66个化合物分为三个类型, 即炔醚类, 炔酯类和炔类. 并利用MS/MS联用技术和高分辨质谱(HRMS)数据研究了三种不同类型化合物的裂解机理, 并总结其规律性, 结果将有助于未知的类似化合物的结构鉴定 .