SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Accurate Gaussian basis sets for the H2O molecule generated with the molecular improved generator coordinate Hartree–Fock method

The molecular improved generator coordinate Hartree–Fock (MIGCHF) method is used to generate accurate basis sets of primitive Gaussian-type functions for the H₂O molecule. Sequences of increasing size atom centered basis sets are employed to explore the accuracy that can be achieved with this method. Using the O(24s14p8d5f2g1h);H(22s9p5d2f1g) basis set, the HF and second-order electron correlation energies of the H₂O ground state at the experimental geometry are computed as −76.0674680 and −0.3491935 hartree, respectively. The HF energy is in error by 20 μhartree and the second-order correlation energy corresponds to 96.5% of an estimate of the limiting value. The relevance of the present calculations is to show the accuracy that can be achieved in studies of small polyatomic molecules with the MIGCHF method.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

油溶性偶氮染料的合成及其性能研究

随着染料在现代科技中的广泛应用,染料的油溶性也日益受到人们的重视.如:非线性光学材料、激光盘光学信息存贮材料中使用的染料、彩色成像中的油溶性影像染料等,对染料在有机溶剂中的溶解度都有很高的要求.偶氮染料是有机染料中的主要类型,但目前对其分子结构与油溶性关系的研究甚少.本文合成了一类黄色偶氮染料(见表1),并对其色光、油溶性等性能进行了测试,发现取代基相对于偶氮基的位置,是影响偶氮染料油溶性的主要因素.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

微波合成铝掺杂钻酸锂材料及性能研究

以LiOH·H2O，Al2O3和Co3O4为原料，微波加热合成Li离子电池正极材料LiAlxCo（1-x）O2．通过XRD测试表征了不同Al加入量时合成产物的晶体结构，确定当x≤0．4时，产物为单一相层状结构．计算了不同x时LiAlxCo（1-x）O2的晶胞参数，随着x的增大，a值减小，c值增大．对合成LiAlxCo（1-x）O2样品进行DSC—TGA测试，结果表明，当x不同时，合成样品的热稳定性不同．SEM测试表明，合成晶体粒度较均匀，粒径在5μm左右．电化学测试表明，LiAl0.2Co0.8O2的电化学性能最好，首次循环放电容量为127mAh／g，多次循环容量损失率小于LiCoO2．     

四针状氧化锌晶须的制备及其吸波性能的研究

随着雷达探测、卫星通信、航天航空和电子对抗等高科技的发展，特别是近年来抗电磁波干扰、隐形技术、微波暗室等研究领域的兴起．对电磁波吸波材料的研究日益受到人们的重视。随着现代电子工业和信息产业的高速发展．产生电磁波的电子产品（诸如计算机、电视机、手机、微波炉及电磁炉等）的数量急剧增加，