Probe-Free Direct Identification of Type I and Type II Photosensitized Oxidation Using Field-Induced Droplet Ionization Mass Spectrometry

While Type I and Type II photosensitizers are often carefully tailored to achieve their respective advantages in treating different cancers, the identifications of the Type I and II mechanisms as such, the key reaction intermediates, and the consequent oxidation products of the substrates have never been easy. Using our unique home-built field-induced droplet ionization mass spectrometry (FIDI-MS) method that selectively samples molecules at the air–water interface, here we show the facile determination of both Type I and II mechanisms of a poster-child photosensitizer, temoporfin, without the addition of any probes. The unstable doublet radical resulting from the hydrogen abstraction by the triplet temoporfin through the Type I mechanism is captured, manifesting the in situ advantage of FIDI-MS. We anticipate that the method developed in this study can be widely utilized in the future designs of novel photosensitizers and the screening of their photosensitization mechanisms.     

A discussion on mass resolution in secondary ion mass spectrometry

Mass resolution is a very important parameter for mass spectrometry. It is necessary to compare the mass resolution between the newly developed TOF-SIMS and the conventionally high-performance magnetic SIMS. However, the definitions of mass resolution for these two types of instruments are quite different. Whether it is possible to compare mass resolution and how to do such comparison is a challenge. This problem was raised officially during the 2012 ISO/TC 201 meeting at Tampa, Florida, the United States and the long-term cooperation with ISO started afterwards. The definition of mass resolution is one of the most important and fundamental problems for mass spectrometry and should attract significant attention. Here, some detail discussions on mass resolution as well as the related experimental studies in the past few years, including the collaborations with ISO/TC 201/SC6 and SC1 are summarized. This summary covers the common problem for almost all the current existing and still used definitions of mass resolution. A reasonable new definition for mass resolution considering the peak shape or resolution function has been proposed, which has also been confirmed by using experimental studies of the mass resolution comparison between TOF and magnetic SIMS. This study lays a foundation for the future mass resolution comparisons between different mass spectrometry.     

A five-parameter fractional derivative temperature spectrum model for polymeric damping materials

To capture viscoelastic behavior of polymeric damping materials based on limited dynamic mechanical analysis tests, a simple fractional temperature spectrum model representing the viscoelastic materials is proposed in this paper and experimental tests aims at stressing the validity of the model. The storage modulus, the loss modulus, and the loss factor, are established based on the five-parameter fractional derivative model and the time–temperature superposition principle. The dynamic mechanical tests of two polymeric materials are carried out to verify this temperature spectrum model. Results indicate a good agreement between the temperature spectrum model and experimental tests at various temperature conditions. Furthermore, thermodynamic coupling of the viscoelastic material is investigated by temperature rise calculation and vibration experiment test. Comparison analysis shows that the temperature rise model can simulate the temperature rise process for the shear vibration of the constrained damping, which provide references for the damping capability, thermal damage and failure of viscoelastic material.     

Quantification of imatinib and related compounds using capillary electrophoresis-tandem mass spectrometry with field-amplified sample stacking

A quantification method for imatinib (IM), its major metabolite N-desmethyl imatinib (NDI), and a degradation by-product was developed using CE–MS combined with an online concentration technique. The use of multiple reaction monitoring (MRM)–MS/MS further improved the sensitivity of this technology. Liquid–liquid extraction (LLE) using tertiary butyl methyl ether yielded high recovery and reproducibility for the pretreatment of serum samples. The recovery rate exceeded 83% for all three analytes, and was 90% for IM. To improve quantification results, a conductivity-induced online analyte concentration technique, field-amplified sample stacking (FASS), was used. The S/N ratios were improved at least 10-fold when compared with conventional capillary zone electrophoresis. The detection limits were 0.2 ng/mL for IM, 0.4 ng/mL for NDI, and 4 ng/mL for the degradation by-product. These results are superior to those previously obtained by other reported methods. The new method was validated in terms of its selectivity, intra- and interday repeatability and accuracy, and sample storage stability, following the guidelines issued by the European Medicines Agency. Considering the convenient pretreatment procedure (LLE), superior sensitivity, and fast analysis speed (<15 min), this method can be useful in the determination of imatinib levels in blood.     

Density Functional Studies of Coenzyme NADPH and Its Oxidized Form NADP+: Structures,UV–Vis Spectra,and the Oxidation Mechanism of NADPH

Density functional theory has been used to study the biologically important coenzyme NADPH and its oxidized form NADP⁺. It was found that free NADPH prefers a compact structure in gas phase and exists in more extended geometries in aqueous solution. Ultraviolet–visible absorption spectra in aqueous solution were calculated for NADPH with an explicit treatment of 100 surrounding water molecules in combination with the COSMO solvation model for bulk hydration effects. The obtained spectra using the B3LYP hybrid density functional agree quite well with experimental data. The changes of Gibbs free energies ΔG in reactions of NADPH with O₂ observed experimentally in cardiovascular and in chemical systems, that is, NADPH + 2 ³O₂ → NADP⁺ + 2 O₂⁻ + H⁺ and NADPH + ¹O₂ + H⁺ → NADP⁺ + H₂O₂, respectively, were calculated. The NADPH oxidation reaction in the cardiovascular system cannot proceed without activation since the obtained ΔG is positive. The reaction of NADPH in the chemical system with singlet oxygen was found to proceed in two ways, each consisting of two steps, that is, NADPH firstly reacts with ¹O₂ barrierlessly to form NADP⁺ and HO₂⁻, from which H₂O₂ is formed in a spontaneous reaction with H⁺, or ¹O₂ and H⁺ initially form ¹HO₂⁺, which further reacts with NADPH to yield NADP⁺ and H₂O₂. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.     

UPLC-QTOF-MS法研究甘油三酯作为水生环境中农药污染的潜在生物标志物

以鲫鱼为代表性研究对象, 采用超高效液相色谱-四极杆飞行时间质谱(UPLC-QTOF-MS)技术, 分别研究了3种农药(敌百虫、 高效氯氰菊酯和吡虫啉)对其体内代谢的影响. 通过Masslynx软件在MS ^E模式下采集数据, 使用UNIFI软件进行自动检测和数据过滤, 并将差异性物质与在线代谢组数据库进行比较, 鉴定出甘油三酯类(TGs)物质具有明显差异. 其中, 吡虫啉对TGs代谢的影响最大, 且肝脏的代谢差异比大脑更显著, 低浓度的急性暴露诱导肝脏中的TGs积累, 其含量与暴露浓度之间的关系符合Michaelis-Menten方程的增长趋势. 结果表明, TGs可在短时间内(≤2 h)灵敏地反映农药吡虫啉的低浓度(≤20 ng/mL)暴露, 可作为考察吡虫啉对水生生物毒性的潜在生物标记物, 有助于建立一种快速、 灵敏的预警方法.     

Intramolecular proton transfer in the isomerization of hydroxyacetone: Characterization based on reaction force analysis and the bond fragility spectrum

The mechanism of isomerization of hydroxyacetone to 2-hydroxypropanal is studied within the framework of reaction force analysis at the M06-2X/6-311++G(d,p) level of theory. Three unique pathways are considered: (a) a step-wise mechanism that proceeds through the formation of the Z-isomer of their shared enediol intermediate, (b) a step-wise mechanism that forms the E-isomer of the enediol, and (c) a concerted pathway that bypasses the enediol intermediate. Energy calculations show that the concerted pathway has the lowest activation energy barrier at 45.7 kcal mol⁻¹. The reaction force, chemical potential, and reaction electronic flux are calculated for each reaction to characterize electronic changes throughout the mechanism. The reaction force constant is calculated in order to investigate the synchronous/asynchronous nature of the concerted intramolecular proton transfers involved. Additional characterization of synchronicity is provided by calculating the bond fragility spectrum for each mechanism.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

电动分离统一理论

在真空、气相和液相中实施线性电动分离,创造出了质谱、离子淌度谱、电泳和毛细管电泳等,但它们却未成体系,各自发展,各有理论,互不相关。该文从牛顿力学第二定律出发结合静电学理论,推导出了它们的统一运动方程,并由此推演出并简要讨论了上述各法自己的通用运动子方程和测量模式。这些方程不仅有利于系统化这些现存方法,也可用于推导和发现新型电动分离模式。     

加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法测定水产品中10种氟喹诺酮类药物残留

养殖过程中的不合理使用和滥用使得水产品中氟喹诺酮抗生素残留累积量呈递增趋势,对人类的健康造成潜在的风险。建立高效、灵敏和可靠的水产品中氟喹诺酮类药物的同时分析方法十分重要。该研究建立了加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法(ASE-MSPE-HPLC-MS/MS)测定水产品中沙拉沙星、氧氟沙星、恩诺沙星、丹氟沙星、洛美沙星、培氟沙星、环丙沙星、依诺沙星、诺氟沙星和双氟沙星残留的检测方法。采用室温自组装法,即在室温(25 ℃)下,将氧化石墨烯和零价纳米铁储备液快速涡旋混合,磁性分离收集沉淀物,得到GO@nZVI磁性复合材料。以扫描电镜、傅里叶变换红外光谱和X-射线衍射对磁性复合材料进行表征,结果显示GO@nZVI成功制备。该材料应用于MSPE净化中,ASE萃取温度为70 ℃,萃取溶剂为甲醇,萃取压力为10.34 MPa,静态萃取时间为5 min,循环萃取3次。萃取液浓缩后经MSPE有效净化后,采用Agilent ZORBAX Eclipse Plus C18色谱柱(100 mm×3.0 mm, 1.8 μm)梯度洗脱分离,MS/MS电喷雾正离子(ESI⁺)扫描、多反应监测(MRM)模式进行定量分析。氟喹诺酮的线性范围为1~100 μg/kg,线性相关系数(r²)均大于0.9995;目标物的检出限(S/N=3)为0.02~0.29 μg/kg,定量限(S/N=10)为0.07~0.98 μg/kg。所建方法成功用于黄鱼、草鱼、黑鱼、明虾和沼虾中氟喹诺酮的测定,在1倍、2倍、10倍定量限加标水平下得到的加标回收率为81.6%~105.8%,相对标准偏差(RSD)为4.2%~13.6%。研究表明,将ASE与MSPE有机结合,利用外部磁场实现萃取液的净化,无需离心和过滤操作,溶剂用量少,并且该方法所使用磁性萃取材料制备方法简单,具有自动化程度高、简便快速、方法灵敏度高、准确度高、重复性好等特点,可满足对水产品中FQs残留限量检测要求,具有实际应用前景。