Study of the Crystallization Kinetics. Poly(ethylene oxide) and a blend of poly(ethylene oxide) and poly(bisphenol A-co-epichlorohydrin)

A kinetic study of the crystallization of poly(ethylene oxide) (PEO) and of a blend of PEO+poly(bisphenol A-co-epichlorohydrin) (PBE) was performed by using DSC in a non-isothermal program at constant cooling rates. The curves obtained were analyzed by the Kissinger, Ozawa and Friedman methods, with determination of the kinetic parameters in each case. As a consequence of the presence of PBE, the kinetic parameters were altered, leading to the conclusion that PBE has some influence on the crystallization of PEO, modifying its mechanism. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of EDTA by catalytic amperometric and catalytic potentiometric titration at a small constant current

Summary Amperometric and potentiometric methods at a small constant current were developed to follow the course of catalytic titrations. In ammoniacal medium EDTA was determined by titration with 0.1 M copper(II) chloride in the presence of hydrogen peroxide as the indicator. Amounts of 42.26–126.87 mg of EDTA were determined with a maximal average deviation of 0.55 %. The results obtained are in good agreement with those of comparable methods.

---

Bestimmung von ÄDTA mit Hilfe der katalytischen amperometrischen und der katalytischen potentiometrischen Titration bei kleinem konstantem Strom

Zusammenfassung Die amperometrische und die potentiometrische Methode bei kleinem konstantem Strom wurden für die Verfolgung katalytischer Titrationen ausgearbeitet. ÄDTA wurde in Ammoniakmedium mit 0,1 M Kupfer(II)-chlorid in Anwesenheit von Wasserstoffperoxid als Indicator titriert. Mengen von 42,26–126,87 mg ÄDTA wurden mit einer mittleren Abweichung von 0,55% bestimmt. Die Ergebnisse stimmen gut mit denen vergleichbarer Methoden überein.

The authors thank the SIZ for researchs of SAP Vojvodina for the partial financial support of the present work.     

Ultrasound‐Assisted Synthesis of Hybrid Vanadium Oxide/Polyaniline Nanowires

A single‐step sonochemical procedure to synthesize hybrid vanadium oxide/polyaniline nanowires starting from crystalline V₂O₅ and aniline in aqueous medium is presented. The synthesis explores the effect of high power ultrasounds on heterogeneous solid–aqueous phases, which leads to 30 nm width wires of 5 to 10 µm in length. Monomer intercalation and oxidative polymerization within the inorganic matrix proceed simultaneously with morphological changes. The electronic conductivity of hybrid nanowires reaches 0.8 S · cm⁻¹ at room temperature.

     

Kinetics ofEDTA substitution of N,N′-ethylenedisalicylamidato cuprate(II) in alkaline media

Summary The kinetics ofEDTA reaction with N,N-ethylenedisalicylamidato cuprate(II) is followed at 30°C in borate buffer and is found to be first order in each reactant. The reaction ispH dependent and involves protonation of a deprotonated peptide nitrogen followed by nucleophilic attack byEDTA.

---

Kinetik derEDTA-Substitution von N,N-Ethylendisalizylamidatokupfer(II) in alkalischem Medium (Kurze Mitt.)

Zusammenfassung Die Kinetik derEDTA-Reaktion mit N,N-Ethylendisalizylamidatokupfer(II) wurde bei 30°C in Borat-Puffer verfolgt. Es wurde erste Ordnung bezüglich jedes Reaktanden festgestellt. DiepH-abhängige Reaktion beinhaltet die Protonierung eines deprotonierten Peptid-Stickstoffs, gefogt von einem nucleophilen Angriff einesEDTA-Moleküls.

     

Cyano Derivatives of Bis(cyclopentadienyl)titanium(IV). The crystal and molecular structure of μ-Oxo-bis[bis(cyclopentadienyl)cyanotitanium(IV)], [(η5-C5H5)2TiCN]2O

By the reaction of KCN with Cp₂TiCl₂ (Cp = η⁵-C₅H₅) in boiling methanol, bis(cyclopentadienyl)-methoxytitanium(IV) cyanide, Cp₂Ti(OCH₃)CN, is formed which in air is converted into the dinuclear oxygen-bridged derivative (Cp₂TiCN)₂O. By the same procedure, the bis(methylcyclopentadienyl) analogue [MeCp₂TiCN]₂O has been obtained. An X-ray diffraction study of (Cp₂TiCN)₂O has shown that the CN group acts as a unidentate ligand with a Ti? C bond length of 2.158 Å and a Ti? C? N bond angle of 177.7°, very close to linearity. The Ti? O bond distance, 1.836 Å, and the bond angle at the bridging O atom, 174.1°, are normal. The ligands are arranged in a nearly tetrahedral way around the Ti atoms. The structural results are compared to those for similar dinuclear titanium complexes.     

5T2-1A1 Spin transition and residual paramagnetism in bis(2,4-bis(2-pyridyl)thiazole)iron(II) complexes: mössbauer effect and magnetism

The ⁵⁷Fe Mössbauer effect in [Fe(pythiaz)₂] (BF₄)₂ (I) and [Fe(pythiaz)₂] (C&O₄)₂ (II) has been studied between 298 and 4.2°K (pythiaz = 2,4-bis(2-pyridyl)thiazole). At 298°K compound I shows a doublet with ΔE_Q(⁵T₂) = 1.29 mm sec^?1 and δ^1S(⁵T₂) = +0.93 mm sec^?1 characteristic of a ⁵T₂ ground state. At 236°K, a second doublet, typical for a ¹A₁ ground state appears. The transition ⁵T₂ å ¹A₁ progresses as the temperature is lowered but levels off below ≈ 120°K. At 4.2°K, 59% of the intensity is due to the ¹A₁ state, and ΔE_Q(¹A₁) = 1.59 mm sec^?1 and δ^1S(¹A₁) = +0.26 mm sec^?1. In an applied magnetic field, V_zz(¹A₁) < 0 has been determined Similar results have been obtained with compound II.Debye-Waller factors f5_T2 and f1_A1. were determined from the Mössbauer spectra under the assumption of Curie-Weiss dependence of the magnetism for the ⁵T₂ and constant μ_eff for the ¹A₁ ground state. The resulting temperature dependence of f1_A1 is highly unusual thus suggesting complicated magnetic behaviour of both ground states in the transition region. Two mechanisms for the nature of the transition are discussed, a “spin-flip” mechanism being the physically more reasonable one. The assumption of a simple Boltzmann distribution (“spin equilibrium”) may be ruled out for the solid but could be encountered in solutions.     

Phenomenological aspects related to the electrochemical behaviour of smooth palladium electrodes in alkaline solutions

The voltammetric behaviour of smooth palladium electrodes in 1 M NaOH is studied in the potential range related to the thermodynamic stability of water. The electrosorption of H atoms on bulk Pd appears as a reversible reaction coupled to a diffusion process which occurs within bulk Pd. The voltammetric electrodesorption of H from bulk Pd is a process under mixed control, i.e. the diffusion from the bulk and the surface oxidation of H atoms. Fast pseudocapacitive reactions are detected in the range 0.2–0.4 V associated with the adsorption of H atoms at the submonolayer level. The initial stages of Pd oxide layer formation, at ca. 0.68 V, involves two reversible stages. The Pd oxide monolayer formation is achieved at 1.25 V/RHE and is followed by the formation of a third reversible system. This system is enhanced by an excursion in the potential range of the oxygen evolution reaction. This reversible system is probably a redox system involving Pd(II)/Pd(IV) species. The voltammetric electroreduction of the Pd oxide film shows rather irreversible behaviour. Inhibition effects on the reversible adsorption of H atoms due to residual oxide species were observed as well as inhibition on loading the Pd electrode with hydrogen to form the (α + β)-PdH phase. Rotating ring-disc experiments demonstrate that Pd electrodissolution in basic solutions is much smaller than in acid solutions. However, soluble palladium species are detected, especially during the formation of the fast redox systems, in the potential range related to Pd oxide layer growth.     

Transition Metal Atom Sites in Ternary ZrO2-TiO2-SiO2 Xerogels

There has been much work on the binary TiO₂-SiO₂ and ZrO₂-SiO₂ materials prepared by sol-gel because of the beneficial properties resulting from incorporation of Ti and Zr. In contrast the ternary TiO₂-ZrO₂-SiO₂ xerogels have been relatively little studied. We report the results of a study of those xerogels having Zr:Ti:Si ratios of 5:15:80, 10:10:80 and 15:5:80 heated to 750°C and to 1000°C. The study includes X-ray diffraction, small angle X-ray scattering, X-ray absorption spectroscopy at Ti and Zr K-edges, and ¹⁷O MAS-NMR. The study has benefited from close comparison with similar previous studies of the binary systems. The metal atoms in the ternary systems are shown to be predominantly homogeneously mixed in the silica network, as observed for the respective binary systems. The clear exception is for the sample with a minority of Zr, which after heat treatment at 750°C shows the presence of phase separation attributed to the formation of an amorphous precursor of ZrTiO₄; at 1000°C this phase crystallises. In samples with higher Zr content the crystallisation of a ZrO₂ tetragonal phase was observed. The data obtained illustrate well the strength of a research methodology in which a common batch of samples is studied using a coherent suite of modern structural probes.     

Syntheses,molecular structures,and thermal decomposition of cyclopentadienyldicarbonylmanganese chalcogenide derivatives

Transmetallation of the dichalcogenide complexes [CpMn(CO)₂]₂(-X₂) (X = S or Se) with M(CO)₅(thf) (M = Cr or W) afforded new heterometallic complexes CpMn(CO)₂(-Se₂)Cr(CO)₅, CpMn(CO)₂(-Se₂)[Cr(CO)₅]₂, CpMn(CO)₂(-X₂)[W(CO)₅]₂ (X = S or Se), and CpMn(CO)₂(-Se₂)[Cr(CO)₅][W(CO)₅]. According to the X-ray diffraction data, their molecular structures contain the cyclic MnX₂ fragments coordinated by one or two M(CO)₅ groups via the X atoms. Study of thermal decomposition of the manganese complexes with different Mn : M : X ratios (M = Cr, W; X = S, Se, Te) by differential scanning calorimetry (DSC) and thermogravimetry demonstrated that this process took place at rather low temperatures (100—400 °C) and was accompanied by complete elimination of the CO groups followed by elimination of the Cp groups. At any metal to chalcogen ratio, the resulting inorganic chalcogenides contained no impurities of metal oxides and carbides.