Selenium in electrolytic manganese as a reference material for the quality control of aluminium melts

Electrolytic manganese is an important alloying element for aluminium and steel melts. It is mainly added to melts of aluminium in the holding furnace as tablets or minitablets (compressed compacts of manganese and aluminium powders). Selenium derivates are usually added during the production of electrolytic manganese, so some selenium is present in the alloys produced when electrolytic manganese is added to the aluminium furnace. Since the selenium contents of many alloys are of concern from health and environmental perspectives, their values should be provided. In this work, a laboratory reference material (LRM) based on electrolytic manganese was produced to assure our routine quality control method, where selenium is analysed by hydride generation followed by optical emission spectrometry with inductively coupled plasma (HG–ICP–OES). Therefore, the present paper describes in detail the preparation procedure for and the results from homogeneity and stability studies performed on electrolytic manganese LRM. For this purpose, a commercial electrolytic manganese lot was selected and the main factors involved in the preparation of the material (pretreatment step, homogenization, bottling and storage) were carefully studied and established in order to guarantee the long-term stability of the LRM. The results obtained showed that the LRM developed was a fit-for-purpose material for the quality control of the routine analysis of selenium.     

Determination of dissolved manganese in natural waters by differential pulse cathodic stripping voltammetry

A procedure based on differential pulse cathodic stripping voltammetry on the graphite electrode is described for the determination of dissolved manganese in natural waters buffered at pH about 6.5 with acetate solution. In order to avoid interference of iron(II) the addition of fluoride is used. The limit of detection is 3 g/l for a deposition time of 6 min. Acidification and UV-irradiation are recommended for samples containing dissolved organic matter. Results of manganese determination in table mineral waters are reported and the possibility of manganese speciation is discussed.     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.     

Hemicucurbit[6]uril a Macrocyclic Ligand with Unusual Complexing Properties

The complex formation of the macrocyclic ligand hemicucurbit[6]uril with various salts has been studied in aqueous solution. Due to the low solubility of this ligand the formation of complexes results in an increase of the amount of ligand present in solution. From these measurements the stability constants of the complexes formed are calculated. Hemicucurbit[6]uril only forms cation complexes with cobalt(II), nickel(II) and the uranylion. All other cations examined e.g. silver(I), lead(II) and copper(II) do not form detectable complexes in aqueous solution. For a better understanding of the complexation behaviour some quantum mechanical chemical calculations are performed with Gaussian.Dedicated to Prof. H. Möhwald on the occasion of his 60th birthday.     

The study of terbium generated bacterirhodopsin

The localization of Terbium (Tb³⁺) cations binding to deionized bacteriorhodopsin (bR) has been studied by using spectroscopic methods. It was found that adding Tb³⁺ cations to deionized bR affects the fluorescence lifetimes of tryptophan (Trp) in bR, the wavelength of fluorescence peak shifts “blue” and the peak value of fluorescence decreases. It was also found that adding one Tb³⁺ cation to deionized bR can restore the purple state from its blue state obviously. The measurements of absorbance, fluorescence and lifetime of fluorescence also show that when more than three Tb³⁺ cations are added, no further changes can be found. It is suggested that one Tb³⁺ specific binding site for the color-controlling is located on the exterior of the bR trimer structure to negatively charged lipids near Trp-10 and Trp-12. Three Tb³⁺ cations binding per bR is needed for the regenerated bR.     

Solvent extraction and bulk liquid membrane transport of Co(II) and Ni(II) ammine cations by proton-ionizable crown ethers

Separation efficiencies and selectivities in solvent extraction of Co(II) and Ni(H) ammine cations from aqueous solutions into chloroform and toluene and in transport through bulk toluene membranes by proton-ionizable crown ethers have been determined. Six proton-ionizable crown ethers with differing lipophilicities, polyether cavity sizes and ionizable groups (carboxylic and sulfonic acid functions) were examined. Higher selectivity and efficiency for Co(II) ammine cation extraction was observed for the more lipophilic, proton-ionizable crown ethers. Highly lipophilic crown carboxylic acids provided effective and selective transport of Co(II) ammine cations through bulk toluene membranes.Presented in part at the 6th International Symposium on High Purity Materials in Science and Technology: Preparation, Characterization and Application of Well-Defined Materials, Dresden, GDR, May 1985, Poster D91, Poster Abstracts, pp. 144, 145.All extraction and transport experiments were conducted at this location.     

电位法测定异价阳离子通过阳离子交换膜时的选择透过性

从理论上导出了不等价的两种阳离子在通过阳离子交换膜时的选择透过性与膜电位的关系，并用电位法对一些不等价阳离子组合在两种商品膜中的选择透过性进行了测定。本方法测定结果与电渗析实际分离效果相符。     

若干锰(Ⅲ)希夫碱配合物的合成和表征

合成了六种锰(Ⅲ)希夫碱配合物:Mn(bzacem)X(X~-=Cl~-,Br~-,I~-,NCS~-,NO_2~-)和Mn(bzacen)ClO_4·2H_2O,其中bzacen~(2-)为N,N′-二(苯甲酰丙酮缩)-乙二胺阴离子.用NMR法测定配合物在DMSO溶液中的有效磁矩值为4.46—4.63,表明为高自旋配合物,将电子光谱中的吸收带分别按配位场带、荷移带和配体带进行了归属,在配合物的红外光谱中,原配体H_2bzacen中的ν_(N-H)带消失,ν_(C-O)带移向低频,并对Mn-O、Mn-N和Mn-X的伸缩带进行了归属。     

Initiation of cationic polymerization of n-butyl vinyl ether by stable cation radicals of substituted phenothiazines

3,7-Diethyl- 10-phenylphenothiazine (DEPPT), a phenothiazine derivative whose 3,7- and 10-positions are blocked, was synthesized. Potentiostatic electrolysis of DEPPT in acetonitrile (ACN) in the presence of 0.1M of LiClO₄ at 0.7 V (vs. Ag/Ag/Cl) yielded the stable cation radical of DEPPT (DEPPT^+·) which was characterized by cyclic voltammetry, UV-visible spectroscopy, and ESR spectrometry. Stable cation radicals of 10-phenylphenothiazine and 3,7-diethyl-10-methylphenothiazine were also prepared. The cationic polymerization of n-butyl vinyl ether was initiated by these cation radicals, including DEPPT^·+. The electron transfer mechanism for the initiation step, which we proposed previously, was supported by the fact that DEPPT^·+ was capable of initiating the polymerization; dimerization of DEPPT^·+ by releasing protons is precluded because 3,7- and 10-positions are all blocked. © 1994 John Wiley & Sons, Inc.     

固相配位化学反应研究 L ⅩⅩⅢ.等温电导法研究醋酸锰和草酸的室温固相化学反应

本文利用等温电导法考察了醋酸锰和草酸的室温固相配位化学反应的制样方法对实验结果的影响，并获得了该反应的动力学参量。