靶丸支撑膜对ICF内爆性能影响的模拟研究

使用二维多群辐射扩散流体力学程序LARED-S,模拟研究靶丸支撑膜在惯性约束聚变氘氘（DD）气体靶内爆过程中的扰动演化过程及其对内爆性能的影响.二维模拟表明：靶丸支撑膜显著降低DD气体靶内爆的中子产额,二维模拟产额为一维结果的55.2%.内爆性能下降的主要物理机制是支撑膜使靶壳生成大幅度的尖钉深入DD气体区,使烧蚀层与DD气体之间物质界面处的电子热传导漏失功率显著增大,导致DD核反应速率显著降低,中子反应速率峰值时刻（bang-time时刻）提前.相比一维理想内爆的模拟结果,支撑膜引入的扰动显著降低bang-time时刻DD气体压强与内爆动能转化为DD气体内能的效率,壳层剩余动能相应大幅增加.     

投影体与U(P)的极值性质

为了研究著名的Schneider投影问题,E.Lutwak,D.Yang和张高勇最近引进了一个关于对称多胞形的新的仿射不变量U(P),并提出了关于U(P)下界的猜想.本文就二维、三维在一特定条件下的情形给予了此猜想的肯定回答并给出了严格的数学证明.     

支持向量机回归方法在地表水水质评价中的应用

将支持向量机方法应用于地表水质评价问题中,建立了多指标水质综合评价的支持向量机回归模型.在地表水质评价标准的基础上采用内插法获得学习样本,经过训练,得到水质评价的分类区间;然后以实测资料对所建模型进行检验,研究结果表明,支持向量机回归模型性能良好、预测精度高、简便易行,是水质评价的一种有效方法,具有广阔的应用前景.     

Joint value-distribution theorems on Lerch zeta-functions. II

We give corrected statements of some theorems from [5] and [6] on joint value-distribution of Lerch zeta-functions (limit theorems, universality, functional independence). We also present a new direct proof of a joint limit theorem in the space of analytic functions and an extension of a joint universality theorem. Published in Lietuvos Matematikos Rinkinys, Vol. 46, No. 3, pp. 332–350, July–September, 2006.     

选择性激光烧结成型件密度的支持向量回归预测

根据不同工艺参数（层厚、扫描间距、激光功率、扫描速度、加工环境温度、层与层之间的加工时间间隔和扫描方式）下的选择性激光烧结成型件密度的实测数据集,应用基于粒子群算法寻优的支持向量回归（SVR）方法,建立了加工工艺参数与成型件密度间的预测模型,并与BP神经网络模型进行了比较.结果表明：基于相同的训练样本和检验样本,成型件密度的SVR模型比其BP神经网络模型具有更强的内部拟合能力和更高的预测精度;增加训练样本数有助于提高SVR预测模型的泛化能力;基于留一交叉验证法的SVR模型的预测误差最小.因此,SVR是一种预测选择性激光烧结成型件密度的有效方法. 关键词： 选择性激光烧结 密度 支持向量机 回归分析     

Luminescence enhancement of Eu-doped calcium magnesium silicate blue phosphor for UV-LED application

(Ca_1−x,Eu_x)MgSi_2yO_6+δ blue phosphor was prepared by spray pyrolysis and the photoluminescence properties were optimized by controlling concentration of Si element and the activator content. At y=1.0, the concentration quenching in the luminescent intensity appeared when the Eu²⁺ content (x) was 0.01 (1 at%). Such quenching concentration was changed with the concentration of silicon (y), which was increased with an increase in the quantity of excess Si (y>1.0). The highest luminescent intensity was achieved when the Eu²⁺ content (x) and the Si concentration (y) were 0.04 and 1.3, respectively. According to X-ray diffraction (XRD) analysis, the tetragonal SiO₂ phase was formed as a minor phase when the y value was larger than 1.3. The formation of SiO₂ phase, however, did not reduce but increased the luminescent intensity when the Eu²⁺ content was optimized again. As a result, the luminescent intensity of the phosphor particles optimized in the content of both Si and Eu²⁺ was about 150% improved compared with that of the CaMgSi₂O₆:Eu sample (x=0.01, y=1.0).     

Multi-criteria decision aid for the formulation of sustainable technological energy priorities using linguistic variables

Implementation of new and innovative energy technologies is a key mean towards a sustainable energy system. Currently, governments have to decide from an increasingly diverse mix of them, the ones which warrant support, including funding and other incentives for private sector efforts. However, appraising energy technologies in terms of their sustainability is a really complex task, considering the series of uncertainties and implications that have to be encountered so as to obtain realistic and transparent results. In this context, the main aim of this paper is to present a direct and flexible multi-criteria decision making approach, using linguistic variables, to assist policy makers in formulating sustainable technological energy priorities. Furthermore, its software realization will be applied to a number of technologies, in the context of the Greek Technology Foresight Programme, and the results will be presented and discussed.     

大口径反射镜低附加波前控制技术

为降低惯性约束聚变装置中大口径反射镜在重力作用下附加面型对光束质量的影响,对大口径反射镜镜背支撑技术进行了研究。经支撑结构优化,大口径反射镜由重力导致的附加面型从0.5 m降为0.26 m。对大口径反射镜镜体的打孔工艺、镜体与支撑架联接工艺及镜架结构进行了研究,并加工了样机进行验证,从实际测试结果来看,采用的反射镜打孔及粘结工艺对反射镜面型的影响可以忽略,反射镜镜架结构可以满足反射镜支撑要求,反射镜采用背支撑技术可以有效降低重力带来的附加波前。     

Second-order Born calculation of coplanar symmetric(e, 2e) process on Mg

The second-order distorted wave Born aPl6roximation （DWBA） method is employed to investigate the triple differen- tial cross sections （TDCS） of coplanar doubly symmetric （e, 2e） collisions for magnesium at excess energies of 6 eV-20 eV. Comparing with the standard first-order DWBA calculations, the inclusion of the second-order Born term in the scattering amplitude improves the degree of agreement with experiments, especially for backward scattering region of TDCS. This indicates that the present second-order Born term is capable to give a reasonable correction to DWBA model in studying coplanar symmetric （e, 2e） problems of two-valence-electron target in low energy range.     

MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。