The ridge waveguide fabrication with periodically poled MgO-doped lithium niobate for green laser

Ridge waveguides were fabricated using an external field, a precision lapping machine and neutron loop discharge (NLD) in magnesium-oxide-doped lithium niobate. The measured quasi-phase-matching (QPM) wavelength of the second-harmonic generation (SHG) in a 30 mm long periodically poled magnesium-doped lithium niobate (PPMgLN) ridge waveguide which has a domain period of 6.8 μm is about 532 nm. A fabricated periodically poled magnesium-doped lithium niobate ridge waveguide was duty cycle of 51.9 ± 2.83% and demonstrated second-harmonic generation. By using this periodically poled magnesium-doped lithium niobate ridge waveguide, highly effective, low-cost optical devices with high power or short wavelength can be achieved.     

镁单晶变形行为的原子模拟

应用分子动力学方法模拟镁单晶在单向拉伸作用下的力学性能和微观结构演化过程.不同应变和不同温度下的模拟结果中都观测到{1011},{1012}型李晶.表明这两种孪晶是镁单晶拉伸变形的主要机制.其中{1012}型挛晶的产生伴随新晶粒生成,并且随应变增加孪晶的数量增加.此外,随着温度的增加,原子热激活效应显著.镁单晶的最大弹性形变减小,最大应力值亦变小.     

Thermodynamics of electrolyte solutions: Activity and osmotic coefficients of aqueous NaCl in the NaCl-MgCl2-H2O system at different temperatures by the EMF method

The activity and osmotic coefficients of aqueous NaCI in the NaCl-MgCl₂-H₂O system at 25, 35 and 45°C and total ionic strengths of 0.5, 1, 2 and 3 were obtained by an EMF method using a sodium ion-selective electrode and an Ag/AgCl electrode. The Harned coefficients and Pitzer binary and ternary interaction coefficients were also determined.     

MgCu4Sn型稀土镁合金相力学和热力学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,系统研究了典型立方结构合金相LaMgX4(X=Co, Ni, Cu)的力学特性和热力学特性。根据广义胡可定律计算了合金相的单晶弹性常数;根据单晶弹性常数和Hershey’s averaging方法计算了合金相的多晶弹性模量、泊松比、Zener各向异性因子和德拜温度。采用基于准谐近似的Gibbs2代码计算了LaMgX4(X=Co, Ni, Cu)合金相的吉布斯自由能、熵和等体热容与温度的关系。LaMgNi4的计算结果与其他文献计算结果及实验结果符合的很好。结果表明：LaMgX4 (X= Co, Ni, Cu)合金均为延展性、塑性和弹性各向异性材料。德拜温度按以下顺序递减：LaMgNi4>LaMgCu4>LaMgCo4。     

Suppressed formation of CO2 and H2O in the oxidative coupling of methane over La2O3/MgO catalyst by surface modification

Oxidative coupling of methane (OCM) is a promising way to convert methane into C_2 hydrocarbons. However, CO_2 and H_2O are by-products of the reaction. To utilize the higher activity of lanthanum oxide and save its usage, MgO supported La_2O_3 catalyst was prepared. Surface modification of the catalyst with nitric acid was made to suppress the formation of the by-products. Experimental results indicated that the addition of nitric acid increased the surface oxygen species with binding energy of ca. 531.7 eV and at the same time reduced the pore volume of the catalyst. These effects of nitric acid finally led to the increase of C_2 selectivity and the decrease of the by-products formation. Hydrogen selectivity was found about 14%- 18% over the catalysts adopted in this work.     

β‐Diketiminate‐Stabilized Magnesium(I) Dimers and Magnesium(II) Hydride Complexes: Synthesis,Characterization, Adduct Formation,and Reactivity Studies

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating β‐diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)₂CH]^? (Ar=phenyl, (^PhNacnac), mesityl (^MesNacnac), or 2,6‐diisopropylphenyl (Dipp, ^DippNacnac)), [(DippNCtBu)₂CH]^? (^tBuNacnac), and [(DippNCMe)(Me₂NCH₂CH₂NCMe)CH]^? (^DmedaNacnac) are reported. The complexes [(^PhNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(OEt₂)], [(^DmedaNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(thf)], [(^DippNacnac)MgI(thf)], [(^tBuNacnac)MgI], and [(^tBuNacnac)MgI(DMAP)] (DMAP=4‐dimethylaminopyridine) were shown to be monomeric by X‐ray crystallography. In addition, the related β‐diketiminato beryllium and calcium iodide complexes, [(^MesNacnac)BeI] and [{(^DippNacnac)CaI(OEt₂)}₂] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)]. The reduction of a 1:1 mixture of [(^DippNacnac)MgI(OEt₂)] and [(^MesNacnac)MgI(OEt₂)] with potassium gave a low yield of the crystallographically characterized complex [(^DippNacnac)Mg(μ‐H)(μ‐I)Mg(^MesNacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [(^MesNacnac)BeI], [{(^DippNacnac)CaI(OEt₂)}₂], or [{(^tBuNacnac)CaI(thf)}₂] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [(^MesNacnac)Mg(L)Mg(L)(^MesNacnac)] (L=THF or DMAP), [(^MesNacnac)Mg(μ‐AdN₆Ad)Mg(^MesNacnac)] (Ad=1‐adamantyl), [(^tBuNacnac)Mg(μ‐AdN₆Ad)Mg(^tBuNacnac)], and [(^MesNacnac)Mg(μ‐tBu₂N₂C₂O₂)Mg(^MesNacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [(^tBuNacnac)Mg(μ‐H)₂Mg(^tBuNacnac)] has shown the compound to have different structural and physical properties to [(^tBuNacnac)MgMg(^tBuNacnac)]. Treatment of the former with DMAP has given [(^tBuNacnac)Mg(H)(DMAP)], the X‐ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [(^MesNacnac)Mg(μ‐H)₂Mg(^MesNacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [(^MesNacnac)MgMg(^MesNacnac)] confirmed that the compound is devoid of hydride ligands.     

Anodic film formation on binary Al?Mg and Al?Ti alloys in nitric acid

Nitric acid is commonly used for surface treatments of aluminium alloys. It is used to clean the surfaces after alkaline etching; it has application in chemical polishing and is also used for electrograining. The majority of these treatments undergo the application of anodic polarisation that results in formation of anodic oxide film. However, little is known about the behaviour of aluminium containing magnesium or titanium in solid solution under such conditions. To reveal the effects of magnesium and titanium alloying additions on anodic film formation in nitric acid, Al‐1800 ppm Mg and Al‐800 ppm Ti alloys were investigated. It was found that porous alumina film developed on the surfaces with reduced efficiency of 40%, due to the reactive nature of nitric acid to alumina. The presence of magnesium and titanium in aluminium had little influence on the efficiency of film growth, as confirmed by the relatively similar thicknesses of oxide formed on binary alloys and aluminium. However, incorporation of magnesium ions into the alumina film led to development of a high‐population density of localised voids near the alloy/film interface. An increased titanium content was found in the film regions close to the alloy/film interface, indicating its oxidation. Copyright © 2009 John Wiley & Sons, Ltd.     

Formation of Superoxo Species by Interaction of O2 with Na Atoms Deposited on MgO Powders: A Combined Continuous‐Wave EPR (CW‐EPR), Hyperfine Sublevel Correlation (HYSCORE) and DFT Study

The formation of O₂^? radical anions by contact of O₂ molecules with a Na pre‐covered MgO surface is studied by a combined EPR and quantum chemical approach. Na atoms deposited on polycrystalline MgO samples are brought into contact with O₂. The typical EPR signal of isolated Na atoms disappears when the reaction with O₂ takes place and new paramagnetic species are observed, which are attributed to different surface‐stabilised O₂^? radicals. Hyperfine sublevel correlation (HYSCORE) spectroscopy allows the superhyperfine interaction tensor of O₂^?Na⁺ species to be determined, demonstrating the direct coordination of the O₂^? adsorbate to surface Na⁺ cations. DFT calculations enable the structural details of the formed species to be determined. Matrix‐isolated alkali superoxides are used as a standard to enable comparison of the formed species, revealing important and unexpected contributions of the MgO matrix in determining the electronic structure of the surface‐stabilised Na⁺? O₂^? complexes.