Iminophosphanes: Unconventional Compounds of Main Group Elements

The large number of known stable compounds in which phosphorus has a low coordination number makes it clear that such compounds can no longer be regarded as “exotic” in main group chemistry. While the rich chemistry of P? C multiply bonded systems makes clear their affinity to their organic congeners, iminophosphanes in particular are also of increasing importance. The linkage of a phosphinidine fragment with an imine fragment via a multiple bond gives rise to a class of compounds with an unusually wide range of structural types. This in turn leads to a broad spectrum of chemical behavior which makes iminophosphanes extremely useful synthetic building blocks in organoelement chemistry.     

Cooled internal reflection element for infrared chemical sensing of volatile to semi-volatile organic compounds in the headspace of aqueous solutions

In this study, the cooling effect was applied to an evanescent wave type infrared (IR) chemical sensing method to effectively trap volatile organic compounds (VOCs), which have been absorbed in the hydrophobic film coated around the internal reflection element (IRE). The detection of VOCs in aqueous solutions was taken in the headspace of the aqueous solution. This method eliminates the long-term instability of hydrophobic film soaked in an aqueous solution and the potential spectral interference caused by the matrix of the aqueous solution. Thermal energy has been applied to the aqueous solution to assist in the evaporation of VOCs out of the aqueous matrix. By applying a cooling system to the IRE, the excess thermal energy can be removed leading to more stable IR signals. After examination of organic compounds with vapour pressure (P_v) ranging from 0.017 to 150 Torr, significant differences were found between IR signals from cooled and un-cooled systems. Because the thermal conductivity of the IRE used in IR detection is typically low; the efficiency in removing the thermal energy is limited. By heating the aqueous solutions to different temperatures, the IR signals showed that the sample temperature was limited to around 80 °C. The IR signal determination results for five different volatility organic compounds indicated that the optimal heating temperature was not necessary to match with the volatilities of organic compounds in cooling system. The linear regression coefficient (R²) of the standard curve for sample concentrations in the range 5-200 μg ml⁻¹ was generally higher than 0.991 and the detection limit was around a few hundred ng ml⁻¹, which was two to three times lower than that of un-cooled system.     

Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

CrIII-Phthalocyaninate: Darstellung,Eigenschaften und Kristallstruktur von l-Bis(triphenylphosphin)iminium-trans-di(nitrito(O))phthalocyaninato(2–)-chromat(III)

Cr^III Phthalocyaninates: Synthesis, Properties, and Crystal Structure of l-Bis(triphenylphosphine)iminium trans-Di(nitrito(O))phthalocyaninato(2–)chromate(III) [Cr(H₂O)₂Pc^2?]I_x reacts with excess (PNP)NO₂ in dimethylformamide to yield less soluble greenblack l-bis(triphenylphosphine)iminium trans-di(nitrito(O))phthalocyaninato(2–)chromate(III), ^l(PNP)^trans[Cr(ONO)₂Pc^2?], which crystallizes in the triclinic space group P1 (No. 2) with Z = 2. The Cr atom is in the center of the Pc^2? ligand and the two nitrite ions are monodentate O-coordinated in a mutually trans arrangement to the Cr atom. The Cr? O and Cr? N_iso bond distances are 1.9898(14) und 1.981(2) Å, respectively. The geometric data of the coordinated nitrite ion are: d(N? O) = 1.307(2) Å; d(N? O) = 1.205(2) Å; ?(O? N? O) = 113.7(2)°; ?(Cr? O? N) = 116.85(12)°. The non-bonding O atoms are trans to the Cr atom. The Pc^2? ligand is slightly saddled. Three weak spin-allowed trip-quartet(TQ) transitions (in 10³ cm^?1): TQ1 (8.20) < TQ2 (11.3) < TQ3 (20.33) and the characteristic π-π* transitions of the Pc^2? ligand: B (14.68) < Q₁ (27.1) < Q₂ (29.0) < N (35.4) are observed in the UV-VIS-NIR spectrum. Prominent luminescence spectra are obtained by excitation within the TQ1 region, in which the spin-forbidden trip-sextet transition at 7376 cm^?1 dominates at low temperatures (T < 50 K). The vibrational spectra are discussed. In coincidence of the excitation lines with TQ3, v_s(Cr? O) at 378 cm^?1 is selectively resonance Raman (RR) enhanced. v_as(Cr? O) is observed in the FIR spectrum at 391 cm^?1. The following internal vibrations (in cm^?1) of the nitrito ligand are in the MIR spectrum: v_as(N? O)/1447 > v_as(N? O)/1018/1029 > δ(O? N? O)/828 and in the RR-spectrum: v_s(N? O)/1410 > v_s(N? O)/952, the last followed by three overtones.     

Catalytic olefination of carbonyl compounds. A new versatile method for the synthesis of alkenes

The review is devoted to a new catalytic olefination reaction (COR) discovered by the authors. This is the reaction between N-unsubstituted hydrazones of carbonyl compounds with dihalides CHal₂XY in the presence of copper(i) chloride to give substituted alkenes. Catalytic olefination is versatile. Variation of the carbonyl and olefinating components opens up the way for the synthesis of various classes of unsaturated compounds including those containing functional groups. The reaction mechanism is discussed and a catalytic cycle describing the process is proposed. A model for estimating and predicting the reactivity of halogen-containing compounds in the COR is developed. The relationship between the structure of the carbonyl substrates and their behavior in the title reaction is elucidated.     

SPME – A valuable tool for investigation of flower scent

A novel Headspace Solid Phase Microextraction (HS‐SPME) protocol is proposed for the analysis of floral scent. Volatile compounds emitted from the flower are collected on a Carboxen/PDMS fiber for 1 hour, transferred to the GC, and analyzed by GC/MS. The method completely eliminates the use of organic solvents, does not require special instrumentation, and may readily be performed in the field without access to mains electricity and other energy supplies. The method is robust, sensitive, and reduces the sampling stress on the investigated plant. Since enzymatic reactions in living flowers may cause changes in the composition of emitted fragrance, dried rosemary (Rosmarinus officinalis L.) was used as a stable standard for the method development and optimization. In addition, grape wine was also suggested as homogeneous, bio‐compatible, and relatively stable standard of pronounced and typical scent for the same purpose. The optimized method was used for the comparative investigation of the fragrances emitted by two different species – Lathyrus vernus (L.) and Orchis pallens (L.). Several monoterpenes (C10 compounds) were found as the main fragrance components of lathyrus, while sesquiterpenes (C15 compounds) were typical for the orchid.     

Verbindungen A3M5 (A = Erdalkalimetall,M = Triel/Tetrel): Eine Fallstudie zur strukturellen und elektronischen Stabilität polarer intermetallischer Phasen

Compounds A₃M₅ (A = alkaline earth, M = triel/tetrel): A Case Study on Structural and Electronic Factors Stabilizing Polar Intermetallics Starting from the non electron precise binary compounds Ca₃Ga₅/Sr₃In₅ (Hf₃Ni₂Si₃ type) and Ba₃Al₅ at one hand and Ba₃Pb₅ (Pu₃Pd₅ type) at the other hand, a series of new ternary intermetallics of the general formula A₃M₅ (A: alkaline earth, M: triel/tetrel) has been synthesized, structurally characterized and studied by band structure calculations. The chemical substitution of M in A₃M₅ allows, via the continous variation of the radius ratio (r_A:r_M) and the valence electron number (VE/M) the detection of the geometrically and electronically determined stability ranges of the three structure types formed by the binary compounds. At values of r_A:r_M between 1.30 and 1.52 in the triel rich region of A₃M′_xM″_5?x the Hf₃Ni₂Si₃ type (orthorhombic, space group Cmcm) is formed: In Ca₃Ga₅ up to 1.8 Ga can be substituted by Al, in Sr₃In₅ similar amount of In can be replaced by either Al or Ga. The mixed trielide Sr₃Al_2.6Ga_2.4 (a = 468.4(1), b = 1132.5(1), c = 1570.0(2) pm, R1 = 0.0261) can be obtained, although both corresponding binary phases are not known. At larger values of the ratio r_A/r_M as in Ba₃Al₃Ga₂ (Ba₃Al₅ type, hexagonal, space group P6₃/mmc, a = 598.9(1), c = 1456.0(3) pm, R1 = 0.0353) layers of condensed M₅ building blocks with Al‐Al partial bonds are formed. Substituting one In position in Sr₃In₅ against Pb results in the isotypic, but electron precise Zintl compound Sr₃In₄Pb (a = 506.1(1), b = 1191.8(3), c = 1650.2(4) pm, R1 = 0.0286), where the Fermi level in shifted into a distinct minimum of the density of states. Conversely, at the tetrele rich end of the series A₃In_xPb_5?x, characterized by compounds of the Pu₃Pd₅ type (orthorhombic, space group Cmcm) with almost isolated nido clusters M₅, a minimum of the DOS can be reached, if Pb is partially substituted by In (A₃In_xPb_5?x with A = Sr/Ba: x = 0.7/0.6; a = 1084.6(2)/1118.6(2), b = 867.1(2)/904.4(1), c = 1104.8(2)/1133.9(2) pm, R1 = 0.0394/0.0434).     

Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.     

Fe(Cp)2PF6: An efficient catalyst for cyanosilylation of carbonyl compounds under solvent free condition

An efficient method for the addition of trimethylsilyl cyanide (TMSCN) to various aldehydes and ketones has been described using Fe(Cp)₂PF₆ (2.5 mol%) as a catalyst under solvent free condition. Excellent yields of trimethylsilylether of cyanohydrin up to (94%) was achieved within 10 min.     

Neue ternäre Käfigverbindungen aus den Systemen Barium–Indium/Zink/Cadmium–Germanium: Zintl-Verbindungen mit Phasenbreite?

New Ternary Clathrate Compounds in the Systems Barium–Indium/Zinc/Cadmium–Germanium: Zintl Compounds with Phase Width? By systematic investigations in the systems barium–indium/zinc/cadmium–germanium we found a couple of new electrovalent ternary compounds with A₈X₄₆ clathrate (I) type structures. They crystallize cubically in space-group Pm3n. For Ba₈In₁₆Ge₃₀ (a = 1 075.8 pm), Ba₈Zn₈Ge₃₈ (a = 1 082.0 pm) and Ba₈Cd₈Ge₃₈ (a = 1 096.0 pm) the structures were verified by X-ray single crystal diffraction data. According to valence and bounding distances the new clathrates should be Zintl compounds. Measurements of the temperature dependence of the electrical resistivity proved, that they are indeed semiconductors. A part of the 2B/3B metal atoms can be substituted by germanium. Charge balance will be retained by creation of vacancies in the A₈X₄₆ type structures. By phase analysis the limits of the composition range were determined as Ba₈In₄Ge₉[]₃Ge₃₀ (a = 1 084.9 pm), Ba₈Zn₄Ge₁₀[]₂Ge₃₀ (a = 1 073.6 pm) and Ba₈Cd₄Ge₁₀[]₂Ge₃₀ (a = 1 082.0 pm).