Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Dithienoindophenines: p‐Type Semiconductors Designed by Quinoid Stabilization for Solar‐Cell Applications

Compared with the dominant aromatic conjugated materials, photovoltaic applications of their quinoidal counterparts featuring rigid and planar molecular structures have long been unexplored despite their narrow optical bandgaps, large absorption coefficients, and excellent charge‐transport properties. The design and synthesis of dithienoindophenine derivatives (DTIPs) by stabilizing the quinoidal resonance of the parent indophenine framework is reported here. Compared with the ambipolar indophenine derivatives, DTIPs with the fixed molecular configuration are found to be p‐type semiconductors exhibiting excellent unipolar hole mobilities up to 0.22 cm² V^?1 s^?1, which is one order of magnitude higher than that of the parent IP‐O and is even comparable to that of QQT(CN)4‐based single‐crystal field‐effect transistors (FET). DTIPs exhibit better photovoltaic performance than their aromatic bithieno[3,4‐b]thiophene (BTT) counterparts with an optimal power‐conversion efficiency (PCE) of 4.07 %.     

Molecular Design Principles for Near‐Infrared Absorbing and Emitting Indolizine Dyes

Desirable components for dye‐sensitzed solar cell (DSC) sensitizers and fluorescent imaging dyes include strong donating building blocks coupled with well‐balanced acceptor functionalities for absorption beyond the visible range. We have evaluated the effects of increasing acceptor strengths and incorporation of dye morphology controlling groups on molar absorptivity and absorption breadth with indolizine donor‐based dyes. Indolizine‐based D –A and D –π–A sensitizers incorporating bis‐rhodanine, tricyanofuran (TCF), and cyanoacrylic acid functionalities were analyzed for performance in DSC devices. The TCF derivatives were also evaluated as near‐infrared (NIR)‐emissive materials with the AH25 emissions extending past 1000 nm.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of highly conjugated side‐group‐substituted benzo[1,2‐b:4,5‐b′]dithiophene‐based copolymer for use in organic solar cells

A new donor–acceptor (D–A) conjugated copolymer based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) was synthesized via a Stille cross‐coupling reaction. A highly conjugated thiophene‐based side group, tris(thienylenevinylene) (TTV), was incorporated into each BDT unit to generate the two‐dimensional D–A copolymer (PBDT‐TTV). An alkoxy‐substituted BDT‐based TPD copolymer (PBDT‐OR) was synthesized using the same polymerization method for comparison. PBDT‐TTV thin films produced two distinct absorption peaks. The shorter wavelength absorption (458 nm) was attributed to the BDT units containing the TTV group, and the longer wavelength band (567–616 nm) was attributed to intramolecular charge transfer between the BDT donor and the TPD acceptor. The highest occupied molecular orbital energy levels of PBDT‐OR and PBDT‐TTV were calculated to be −5.53 and −5.61 eV, respectively. PBDT‐TTV thin films harvested a broad solar spectrum covering the range 300–700 nm. A comparison with the PBDT‐OR films revealed stronger interchain π–π interactions in the PBDT‐TTV films and, thus, a higher hole mobility. A polymer solar cell device prepared using PBDT‐TTV as the active layer was found to exhibit a higher power conversion efficiency than a device prepared using PBDT‐OR under AM 1.5 G (100 mW/cm²) conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 653–660     

Side chain engineering of naphthalene diimide–bithiophene‐based polymer acceptors in all‐polymer solar cells

Two novel polymeric acceptors based on naphthalene diimide (NDI) and 2.2′‐bithiophene, named as P(NDI2THD‐T2) and P(NDI2TOD‐T2), were designed and synthesized for all polymer solar cells application. The structural and electronic properties of the two acceptors were modulated through side‐chain engineering of the NDI units. The optoelectronic properties of the polymers and the morphologies of the blend films composed of the polymer acceptors and a donor polymer PTB7‐Th were systemically investigated. With thiophene groups introduced into the side chains of the NDI units, both polymers showed wider absorption from 350 nm to 900 nm, compared with the reference polymer acceptor of N2200. No redshift of absorption spectra from solutions to films indicated reduced aggregation of the polymers due to the steric hindrance effect of thiophene rings in the side chains. The photovoltaic performance were characterized for devices in a configuration of ITO/PEDOT:PSS/PTB7‐Th:acceptors/2,9‐bis(3‐(dimethylamino)propyl)anthra[2,1,9‐def:6,5,10‐def]diisoquinoline‐1,3,8,10(2H,9H)‐tetraone (PDIN)/Al. With the addition of diphenyl ether as an additive, the power conversion efficiencies (PCEs) of 2.73% and 4.75% for P(NDI2THD‐T2) and P(NDI2TOD‐T2) based devices were achieved, respectively. The latter showed improved J_sc, Fill Factor (FF), and PCE compared with N2200 based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3679–3689     

Microwave-assisted one-pot three-component polymerization of alkynes,aldehydes and amines toward amino-functionalized optoelectronic polymers

We present a microwave-assisted one-pot polymerization with three-components of alkynes, aldehydes and amines for the synthesis of new amino-functionalized optoelectronic polymers. The polymerization of diynes(1a-1c), dialdehydes(2a and 2b) and dibenzylamine catalyzed by InCl_3 was carried out smoothly within 1h under microwave radiation, yielding four soluble polymers with high molecular weights. The resulting polymers P1 and P2 could be easily dissolved in alcohol and thus utilized as the cathode interlayer for polymer solar cells(PSCs). Compared with the control device, the PSCs with P1 and P2 as the cathode interlayer and PTB7-Th:PC_(71)BM as the photoactive layer exhibited significantly higher power conversion efficiencies(PCEs) of 9.49% and 9.16%, respectively. These results suggest that this polycoupling reaction is an efficient approach to construct three-component polymers for the practical applications.