Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

低温燃烧法制备Mn-CeO_x催化剂及其NH_3-SCR脱硝性能

通过低温燃烧法(LCS)制备了不同金属硝酸盐与柠檬酸物质的量比的系列Mn-CeO_x(LCS)锰铈催化剂,将其与共沉淀法(CP)制备的Mn-CeO_x(CP)锰铈催化剂相对比,结合XRD、XPS、FESEM和H2-TPR等技术表征,对其NH_3-SCR脱硝催化性能进行了研究。结果表明,金属硝酸盐与柠檬酸的物质的量比是影响Mn-CeO_x(LCS)催化剂脱硝性能的重要因素。虽然两种催化剂中的锰氧化物组分均为无定型,但相较于Mn-CeO_x(CP),Mn-CeO_x(LCS)表面具有较高的锰含量与Oα/(Oα+Oβ)比,其脱硝催化性能也较高;同时,Mn-CeO_x(LCS)锰铈催化剂上有更多的多级孔,有利于气体在催化剂上的吸附和反应。硝酸盐与柠檬酸物质的量比为36∶22的Mn-CeO_x(LCS)锰铈催化剂在80-180℃下脱硝率可达75%-100%;即使通入SO2,180℃下的脱硝率仍可稳定于74%。     

Effects of BaCu（B2O5 ） addition on sintering temperature and microwave dielectric properties of Ba5Nb4O15–BaWO4 ceramics

The effects of BaCu(B2O5)(BCB) addition on the microstructure, phase formation, and microwave dielectric properties of Ba5Nb4O15–BaWO4ceramic are investigated. As a sintering aid, BaCu(B2O5) ceramic could effectively lower the sintering temperature of Ba5Nb4O15–BaWO4ceramic from 1100?C to 950?C due to the liquid-phase effect. Meanwhile,BaCu(B2O5) addition effectively improves the densification of Ba5Nb4O15–BaWO4ceramic and significantly influences the microwave dielectric properties. X-ray diffraction analysis reveals that Ba5Nb4O15and BaWO4coexist with no crystal phase of BaCu(B2O5) in the sintered ceramics. The Ba5Nb4O15–BaWO4ceramics with 1.0 wt% BaCu(B2O5) sintered at 950?C for 2 h presents good microwave dielectric properties of εr = 19.0, high Q × f of 33802 GHz and low τfof2.5 ppm/?C.     

Electrolytes for quasi solid‐state dye‐sensitized solar cells based on block copolymers

The first use of PS_n‐b‐PEO_m‐b‐PS_n block copolymers (PS = polystyrene, PEO = poly(ethylene oxide)) as solid hosts for iodine/iodide electrolytes in dye‐sensitized solar cells (DSSCs) is described. Using the benchmark photosensitizer N719, DSSC based on the quasi solid‐state electrolytes afforded efficiencies up to 6.7%, to be compared with an efficiency of 7.3% obtained in similar conditions with a conventional iodine/iodide liquid electrolyte. By varying the PS:PEO relative volume ratio in the block copolymers different properties and morphologies were obtained. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 719–727     

Printed Circuit Board-Based Electrolyte Regulator for Laminar Microfluidics

The trench on a printed circuit board was reconstructed to fabricate a microfluidic framework that allows low-cost production for small quantities and integration with multifunctional elements. An on-chip electrolyte regulator was thus proposed on this platform to analyze diffusion properties in laminar flow. A numerical model was developed, highlighting the interplay between the electrolyte migration and hydrodynamic properties. Solutions with dissolved sodium chloride were simulated and experimentally tested for the regulation of electrical conductivity under the guidance of the normalized Nernst-Planck equation. The diffusion mechanism and the resulting concentration field were demonstrated in detail. This approach provides a satisfactory manufacturing method and a useful tool for integrated microfluidic systems.     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.     

A Self-Healing Metal–Organic Hydrogel for an All-Solid Flexible Supercapacitor

A zinc containing metal–organic gel (Zn-MOG) with embedded free ions, which exhibits self-healing properties, has been synthesized for application in supercapacitors. The activated carbon-based flexible supercapacitor device with the MOG electrolyte has a broad potential window of 2.1 V, with high retention of specific capacitance compared to the traditional polyvinyl alcohol (PVA)-based gel. The Zn-MOG does not require an additional electrolyte. The sodium and sulphate ions embedded in the MOG are sufficient enough for the charge storage.     

Ultrafast Excited State Relaxation Dynamics of New Fuchsine- a Triphenylmethane Derivative Dye

An all-inclusive investigation of the ultrafast excited state relaxation dynamics of a triphenylmethane derivative molecule, New Fuchsine (NF), using a combined approach of density functional theory (DFT), femtosecond transient absorption spectroscopy (fs-TAS), and photoluminescence spectroscopy is presented in this work. The DFT calculations confirmed the formation of twisted molecular structure in the excited state of NF in ethanol solution with bond rotation of ≈86°. TAS measurements of NF solution exhibited ultrafast ground state-recovery pathway via a conical intersection confirming an ultrafast structural reorientation. On the contrary, TAS measurements of NF thin-film exhibited a longer excited-state lifetime suggesting a hindered molecular twisted state formed as an intermediate step. Photophysical kinetic models are proposed to globally fit the fs-TAS data establishing the twisted intramolecular charge transfer (TICT) state mediated ground state recovery for NF in solution and thin film, respectively. Temperature-dependent photoluminescence study of NF film provided a clear insight into the effect of rotational motion of phenyl rings in NF molecules over the TICT mediated emission.     

Improvement of capacitance activity for Cu‐doped Ni‐based metal–organic frameworks by adding potassium hexacyanoferrate into KOH electrolyte

Cu‐doped Ni‐based metal–organic frameworks (MOFs) nanomaterials fabricated through a one‐pot hydrothermal reaction were characterized, and their performance as supercapacitor electrode materials was further studied for the first time. The results indicated that the doping of foreign metals and the introduction of K₃[Fe(CN)₆] in the KOH electrolyte significantly improve the performance of the supercapacitor. The results indicated that the Ni_2.6Cu_0.4 MOFs material shows the highest specific capacitance (1282 F g^?1 at 1 A g^?1 in mixed 2 M KOH and 0.1 M K₃[Fe(CN)₆]) and optimal capacitance retention (85.7% after 2000 cycles). This work provides a feasible optimization strategy for the construction of MOFs‐based supercapacitor electrode materials with excellent performance, and also provides a reliable experimental and theoretical basis for practical industrial production.