红外热像仪参数的双黑体测量装置

对红外热像仪参数双黑体测量装置的工作原理进行了介绍。装置采用双黑体及反射型靶标为温差辐射源，可实现黑体温度温差准直辐射的定期校准和红外热像仪参数测量量值的溯源，也可实现红外热像仪参数的可控性，以及对它进行稳定的、可复现的精确测量。推导出利用红外热像仪参数双黑体测量装置测量信号传递函数SiTF数学模型，分析了红外热像仪参数测量装置的客观因素——仪器常数，针对仪器常数对SiTF测量的影响进行了试验。试验结果表明，仪器常数对红外热像仪SiTF参数测量精度影响较大，并同时影响时域与空域NETD及3D噪声的准确测量。     

新颖外燃式湿空气燃气轮机循环及性能研究

本文首先提出一种新型的高效燃煤燃气轮机循环一外燃式湿空气透平循环动力系统。由于外燃的特点，作功工质为洁净湿空气，从而可以实现水的回收，是对常规ＨＡＴ循环的突破；另外洁净湿空气排放不受通常烟气露点限制，从而可回收利用湿空气降温时的低温凝结潜热，提高了加湿能力，从而提高系统性能。揭示了新型循环的基本规律；推导出具有湿化特点的约束方程和系统性能简明表达式，指明影响系统性能的关键因素。在透平初温为８５０℃的工况下，系统热效率高达４８．１１％。基于能量品位梯级利用原理和系统集成方法论，通过探索充分而合理利用中低温余热的有效途径，开拓洁净煤燃气轮机总能系统的新方向。     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

a-C:F薄膜的热稳定性与光学带隙的关联

以CF4和C6H6的混合气体作为气源,在微波电子回旋共振化学气相沉积(ECRCVD)装置中制备了氟化非晶碳薄膜(aC:F),并在N2气氛中作了退火处理以考察其热稳定性.通过傅里叶变换红外吸收谱和紫外可见光谱获得了薄膜中CC双键的相对含量和光学带隙,发现膜中CC键含量与光学带隙之间存在着密切的关联,在高微波功率下沉积的氟化非晶碳膜具有低的光学带隙和较好的热稳定性. 关键词： 氟化非晶碳膜 光学带隙 退火温度 热稳定性     

Nuclear Quadrupole Coupling Constants of Chlorine and Microwave Spectrum, Structure, and ab Initio Calculation of 1-Chloro-1,1,2-trifluoroethane

The microwave spectrum of the ³⁵Cl and ³⁷Cl isotopic species of 1-chloro-1,1,2-trifluoroethane (HCFC-133b) has been investigated in the frequency region 10 to 50 GHz using a Stark modulation microwave spectrometer. A pulsed jet Fourier transform microwave spectrometer was also used for the measurement of hyperfine splittings. A least-squares analysis of the observed b-type Q- and R-branch transition frequencies gave rotational and centrifugal distortion constants and components of the chlorine nuclear quadrupole coupling constant tensors in the principal axes system as follows: A=4625.161 (3) MHz, B=2004.127 (2) MHz, C=1875.813 (2) MHz, Δ_J=0.144 (9) kHz, Δ_JK=1.0748 (8) kHz, Δ_K=1.57 (1) kHz, δ_J=0.01376 (4) kHz, δ_K=−0.146 (4) kHz, χ_aa=−57.958 (10) MHz, χ_bb=21.231 (11) MHz, and χ_cc=36.727 (11) MHz for ³⁵ClCF₂CH₂F species, and A=4607.684 (6) MHz, B=1960.565 (2) MHz, C=1834.823 (2) MHz, Δ_J=0.106 (7) kHz, Δ_JK=1.022 (3) kHz, Δ_K=1.48 (1) kHz, δ_J=0.0142 (2) kHz, δ_K=−0.18 (2) kHz, χ_aa=−46.268 (11) MHz, χ_bb=17.319 (13) MHz, and χ_cc=28.950 (13) MHz for ³⁷ClCF₂CH₂F species. The structural parameters are calculated from the observed six rotational constants by assuming the partial structure of ab initio calculation. The electronic properties of the C-Cl bond are evaluated from the observed nuclear quadrupole constants of chlorine. These molecular properties are compared with those of other related molecules.     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

A convenient strategy of dimerization by microwave heating and using 2,5-diketopiperazine as scaffold

A novel and convenient microwave-assisted dimerization of an active peptide compound using the DKPs as scaffold is described. The key reaction giving rise to the diketopiperazine scaffold is the intermolecular coupling. No epimerization was detected in the reactions used. Conventional and microwave heating of the reactions are compared. Synthesis by microwave irradiation gave the desired compounds in higher yields and in shorter reaction times than those obtained by conventional heating.     

连续激光诱导Zn/InP掺杂过程中温度分布的解析计算

在实验的基础上，分析表面蒸发Zn的InP样品在连续激光诱导下掺杂Zn过程.在一维热传导问题的第三类边界条件下，给出激光辐照有限厚双层材料Zn/InP温度分布的一种直观简洁的解析形式. 关键词： 激光诱导掺杂 Zn/InP 温度分布     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007