资源共享方式若干问题的研讨

社会公用服务系统和工程技术系统，存在共同的资源共享问题。本文通过典例就资源共享方式的若干问题加以探究：讨论广义的多用户系统中人工资源共享方式的分类；阐述常用的共享方式的特点、优缺点；分析系统时间性能及其改进与共享方式的关系等。文章还提出在系统工程范畴里，应对社会公用服务和工程技术两类系统的资源共享方式予以综合研究，并相互借鉴和移植。     

STS investigations of temperature dependence of Au(1 1 1) surface state energy position

High temperature scanning tunneling spectroscopy (HT-STS) was used to investigate the electronic structure of Au(1 1 1) at different temperatures in the energy range 0-1 eV below the Fermi level. We concentrated on the influence of temperature on the Shockley surface state (SS) appearing on noble metals surface due to a surface projected bulk bang gap in [1 1 1] direction. The influence of temperature on the projected band gap edge (BE) was also investigated. The experiment was carried out in the temperature range 294-580 K. As the result of the experiment a delicate shift of the SS and the BE in direction of the Fermi level was reported.     

Decomposition of organic salts of some d and f metals

The thermal decomposition in non-isothermal conditions of formates, acetates, propionates and butyrates of Mn, Co, Zn, Cd, Eu, Sm and Ni was studied. The observed compensation effect allows us to calculate the isokinetic temperature. A selective activation mechanism was suggested. This leads to a good agreement between kinetic and spectroscopic data. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermoanalytical methods in pharmaceutical technology

A short survey is given of some aspects of the application of thermoanalytical methods, especially differential thermal analysis (DTA), differential scanning calorimetry (DSC) and thermogravimetry (TG), in solid-dosage technology. The usefulness of these methods in the prediction of drug-excipient compatibility, studies of solid-dispersion systems, the analysis of enantiomers and racemates, measurement of the time of tablet disintegration, the analysis of drug formulations and studies of the processes of grinding and drying of drugs is discussed.

---

Zusammenfassung Es wird ein kurzer Überblick über einige Aspekte der Anwendung von thermoanalytischen Methoden, insbesondere von DTA, DSC und TG in der Feststoffdosierung gegeben. Weiterhin wird die Nützlichkeit dieser Methoden bei der Voraussage der Bindemittelverträglichkeit, bei der Untersuchung disperser Feststoffsysteme, bei der Analyse von Enantiomeren und Racematen, bei der Messung der Tablettenzerfallszeit, bei der Analyse der Arzneimittelformierung und bei der Untersuchung von Mahl- und Trocknungsprozessen bei Arzneimitteln diskutiert.

     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Direct measurement of the magnetocaloric effect in La0.67Ca0.33MnO3

Polycrystalline perovskite La_0.67Ca_0.33MnO₃ was synthesized by a sol–gel method. Its adiabatic temperature change ΔT_ad induced by a magnetic field change was measured directly. At 268 K, near its Curie temperature T_C, ΔT_ad of La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T reaches 2.4 K. The latent heat Q and magnetic entropy change −ΔS_M induced by a magnetic field change were calculated from the temperature dependence of ΔT_ad and zero-field heat capacity C_p. The maximum values of Q and −ΔS_M in La_0.67Ca_0.33MnO₃ induced by a magnetic field change of 2.02 T are 1.85 J g⁻¹ and 6.9 J kg⁻¹ K⁻¹, respectively. The former is larger than the phase transition latent heat of heating or cooling, which is about 1.70 J g⁻¹.     

On the growth strain origin and stress evolution prediction during oxidation of metals

High temperature oxidation of metals leads to residual stresses in the metal and in the oxide. In this work, we try to predict the evolution of the residual stresses in the growing oxides layers, during isothermal oxidation. The origin of these stresses is based on the microstructural model of Clarke, however, another justification is proposed, assuming a proportional dependence of the growth strain with the oxide layer thickness. Using the mechanics of thin layers, as well as the analysis proposed to describe the growth strain, a system of equations are deduced that predict the stresses evolution with oxidation time. Numerical analysis is performed, leading to a set of theoretical curves.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006