IDENTIFICATION OF LANOSTANES AND THEIR POSSIBLY GEOCHEMICAL SIGNIFICANCE IN BIYANG DEPRESSION

In the study, a series of C_(30)-C_(32) lanostane homologs have been identified from Eogene source rocks and crude oils of Biyang depression in Henan Province, China. Based upon the geochemical investigations and simulating experiments, the idea that the generation of lanostane may mainly be related to the specific original organic inputs and low maturity has been proposed.     

过渡金属对分子筛担载Pd催化剂上CO氧化性能影响

分别采用共浸和连续浸渍法制备了一系列添加过渡金属的Pd-M-Ox-NaZSM-5(M=Cr，Mn，Fe，Co，Ni，Cu，Zn，Mo，Zr等)负载型催化剂．以CO氧化为探针反应，考察了不同制备方法对CO氧化性能影响，结果表明共浸法制备的各催化剂其活性明显优于连续浸渍法．详细考察了反应温度、Fe含量、氢气预还原、空速以及水蒸气等对共浸Pd-Fe-Ox-NaZSM-5催化剂上CO氧化行为影响，并应用XRD和XPS等手段对催化剂体相结构和表面状态进行了表征．结果表明：加入Fe2O3可明显提高Pd/NaZSM-5催化剂活性，且催化CO氧化的转化率随反应温度及Fe含量增加而增加；空速增加以及H2预还原作用导致Pd-Fe-Ox-NaZSM-5活性有所降低；催化剂对水蒸气较为敏感．XRD测试结果表明催化剂中Pd组分处于较高分散状态，以红铁矿形式存在的Fe2O3的引入，促进了Pd物种在NaZSM-5载体上的分散．表面XPS分析证实Fe2O3与Pd物种间存在较强的相互协同作用，且催化剂表面Pd物种处于较高氧化状态．Pd的高分散及其与Fe2O3的相互协同作用是共浸催化剂具有高活性的关键因素．     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

低温燐光的研究及应用

本文综述了44篇文献,介绍低温燐光的发展概况及其应用。     

低能离子散射谱分析中的荷电效应及中和作用

用低能离子散射谱（ISS）对比分析了与样品托有良好电接触的和与样品托绝比的金属银片，观察到荷电效应对ISS分析有严重影响。实验还表明在ISS分析时使用低能电子中和枪可以有效地消除荷电效应，还发现电子中和枪的使用对于惰性气体离子的中和作用无明显影响。     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

Limitations of low resolution mass spectrometry in the electron capture negative ionization mode for the analysis of short- and medium-chain chlorinated paraffins

The analysis of complex mixtures of chlorinated paraffins (CPs) with short (SCCPs, C₁₀–C₁₃) and medium (MCCPs, C₁₄–C₁₇) chain lengths can be disturbed by mass overlap, if low resolution mass spectrometry (LRMS) in the electron capture negative ionization mode is employed. This is caused by CP congeners with the same nominal mass, but with five carbon atoms more and two chlorine atoms less; for example C₁₁H₁₇³⁷Cl³⁵Cl₆ (m/z 395.9) and C₁₆H₂₉³⁵Cl₅ (m/z 396.1). This can lead to an overestimation of congener group quantity and/or of total CP concentration. The magnitude of this interference was studied by evaluating the change after mixing a SCCP standard and a MCCP standard 1+1 (S+MCCP mixture) and comparing it to the single standards. A quantification of the less abundant C₁₆ and C₁₇ congeners present in the MCCP standard was not possible due to interference from the major C₁₁ and C₁₂ congeners in the SCCPs. Also, signals for SCCPs (C₁₀–C₁₂) with nine and ten chlorine atoms were mimicked by MCCPs (C₁₅–C₁₇) with seven and eight chlorine atoms (for instance C₁₀H₁₂Cl₁₀ by C₁₅H₂₄Cl₈). A similar observation was made for signals from C₁₅–C₁₇ CPs with four and five chlorine atoms resulting from SCCPs (C₁₀–C₁₂) with six and seven chlorine atoms (such as C₁₅H₂₈Cl₄ by C₁₀H₁₆Cl₆) in the S+MCCP mixture. It could be shown that the quantification of the most abundant congeners (C₁₁–C₁₄) is not affected by any interference. The determination of C₁₀ and C₁₅ congeners is partly disturbed, but this can be detected by investigating isotope ratios, retention time ranges and the shapes of the CP signals. Also, lower chlorinated compounds forming [M+Cl]^– as the most abundant ion instead of [M-Cl]^– are especially sensitive to systematic errors caused by superposition of ions of different composition and the same nominal mass.     

一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

Block balance in hydrogenated polybutadiene‐b‐polymethylmethacrylate diblock copolymer for efficient interfacial activity in low‐density polyethylene/polymethylmethacrylate blend: Phase morphology development

The objective of the present study was to determine the best molecular balance between the two hydrogenated polybutadiene (HPB) and polymethylmethacrylate (PMMA) blocks that promotes an HPB‐b‐PMMA diblock copolymer with efficient compatibilization activity in a low‐density polyethylene (LDPE)/PMMA immiscible blend. The model blend selected, LDPE/PMMA, is “more immiscible” than the LDPE/polystyrene pair largely reported in open literature. The blends having a composition of 80LDPE/20PMMA exhibit a droplet‐in‐matrix phase morphology whereas in 20LDPE/80PMMA a co‐continuous phase morphology was developed. In the droplet‐in‐matrix phase morphology, the emulsifying efficiency of the copolymer was evaluated based on the maximum reduction of the PMMA droplet size it is able to promote. Whereas, in the co‐continuous phase morphology, the copolymer was evaluated based on its ability to stabilize the maximum phase co‐continuity. The sequences of the best emulsifying copolymer revealed are not symmetrical. An HPB‐b‐PMMA where the ratio of molar mass of the blocks, _HPB/ _PMMA, is within 1.8–1.95 exhibits a much better interfacial activity in LDPE/PMMA blends than a copolymer of much lower ratio (longer PMMA block). This is ascribed to the much higher interactions (cohesive energy density) encountered in PMMA (PMMA of the copolymer and PMMA phase of the blend) compared with the LDPE side (HPB of the copolymer and LDPE phase of the blend). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 837–848, 2005